similar to: New motherboard - kernel panic

When using 4.4 to install on gigabyte GA-M51GM-S2 motherboard basically an Nforce 410/430 chipset then network is not initially detect to perform a network install. It let me attempt to manually select a driver but I do not see the driver in the list. After installing the network works and the forcedeth driver is loaded. Is there a way to get this driver detected or manually loaded? THanks,

Hello, I'm facing issues with a Point of View GT210/218 and nouveau drivers. I'm using ubuntu server with LXDE on top of it... *lshw -c video* output: *-display description: VGA compatible controller product: GT218 [GeForce 210] vendor: NVIDIA Corporation physical id: 0 bus info: pci at 0000:01:00.0 version: a2 width: 64 bits clock:

Hi I installed the following driver. http://www.f.csce.kyushu-u.ac.jp/~shigeaki//software/freebsd-nfe.html Before I had the nve driver which was unstable on this server and on a prior server in both cases causing either spontaneous reboot or just a crash when under load. So far touchwood the nfe driver has stayed up and running at almost 3 days uptime and has had some stress. I know the driver

I have been building my systems with Abit IS-10 motherboards, but NewEgg has stopped carrying them, so I need to switch to something new. Does anyone have any recommendations on a solid motherboard that works well with CentOS? I need a motherboard with built-in video, LAN, and SATA. I don't need RAID or any other fancy features, just something cheap and solid. I've been looking around,

What about the Asus M2N-SLI Deluxe motherboard? It has 7 SATA ports, supports ECC memory, socket AM2, generally looks very attractive for my home storage server. Except that it, and the nvidia nForce 570-SLI it''s built on, don''t seem to be on the HCL. I''m hoping that''s just "yet", not reported yet. Anybody run Solaris on it? Or at least on any

Dear developers I have just noticed your fantastic work, and I am looking forward to send you dumps of my GeForce 6150, when I get vacation in two weeks. It is an integrated GPU on my Asus A8N-VM CSM, so I hope it will work. The reason I post is, I am wondering what the motivation is for doing nVidia and not ATi? I have read the "FAQ:Why are you doing this?", but it doesn't

I have a server that frequently hangs while rebooting. I see no errors, but during the boot process it stops at this stage: Initializing hardware... storage network audio The cursor sits just after the word "audio" and I have to do a hard reset to get out of it. This server has no audio capabilities, so I am thinking that I just need to disable the audio stuff so it doesn't

Hi, I have just upgraded my computer to Intel Core i5-4430 Quad Core @ 3.0 GHz (supports VT-d), ASRock B85M Pro4 micro-ATX LGA1150 motherboard (supports VT-d), 8 GB Kingston DDR3-1600 memory and Cooler Master Elite 311 ATX casing (all for SGD$501). I made my computer upgrade on Independence Day 4th July 2013. I have also flashed the UEFI BIOS of ASRock B85M Pro4 motherboard to version 1.50.

I have a backup spooling onto a DLT drive. Is there any tool that will let me monitor the data throughput on the device? -- Bowie

I've been burned by Sata not working on an Asus motherboard (nVidia / nForce) and need to select something that will work for a fairly light duty web/mail/sql server. How do I go about finding out if a specific motherboard will work with sata software raid and Centos 4.4 (or 5.x when it's settled down). Cheers; Alex V. -- This message has been scanned for viruses and dangerous

Does anyone know of a cheap temperature sensor that will work with Linux? I don't need a fancy monitoring appliance, I just want a simple sensor that I can connect to one of my monitoring servers to let me know if the server room is getting hot. -- Bowie

I have a CentOS 7 server that is running out of memory and I can't figure out why. Running "free -h" gives me this: ????????????? total??????? used??????? free????? shared? buff/cache?? available Mem:?????????? 3.4G??????? 2.4G??????? 123M??????? 5.9M??????? 928M??????? 626M Swap:????????? 1.9G??????? 294M??????? 1.6G The problem is that I can't find 2.4G of usage.? If I look

About 9 months ago, I made a policy decision to adopt RAID 1 on all systems I admin. (about 20 systems, all told) It's been a long, slow process. One of the systems is being upgraded from CentOS3 to CentOS4. It's been rock-solid stable for over a year. It's a "frankenserver" with parts from all over the place, maintained over years of active service. Currently,

I need a SCSI card to attach a tape library to my system. I am looking at the Adaptec 29320A-R. Can anyone confirm that this card will work with the stock CentOS 4 kernel? -- Bowie

I have two identical servers. The only difference is that the first one has Maxtor 250G drives and the second one has Seagate 320G drives. OS: CentOS-4.4 (fully patched) CPU: dual Opteron 280 Memory: 16GB Raid card: 3ware 9550Sx-8LP Raid volume: 4-disk Raid 5 with NCQ and Write Cache enabled On the first server I have decent performance. Nothing spectacular, but good enough. The second one

I have two identical servers. The only difference is that the first one has Maxtor 250G drives and the second one has Seagate 320G drives. OS: CentOS-4.4 (fully patched) CPU: dual Opteron 280 Memory: 16GB Raid card: 3ware 9550Sx-8LP Raid volume: 4-disk Raid 5 with NCQ and Write Cache enabled On the first server I have decent performance. Nothing spectacular, but good enough. The second one

One of my CentOS boxes has started giving me errors. The box is CentOS-4.4 (i386) fully updated. It has a pair of SATA drives in a software raid 1 configuration. The errors I see are: ata1: command 0xca timeout, stat 0x50 host_stat 0x24 ata1: status=0x50 { DriveReady SeekComplete } Info fld=0x1e22b8, Current sda: sense key No Sense ata2: command 0xca timeout, stat 0x50

On 8/6/2015 4:21 PM, Chris Murphy wrote: > On Thu, Aug 6, 2015 at 2:08 PM, Bowie Bailey <Bowie_Bailey at buc.com> wrote: > >> Doing a new install on the two 1TB drives is my current plan. If that >> works, I can connect the old drive, copy over all the data, and then try to >> figure out what I need to do to get all the programs running again. > Sounds like a

On 7/27/2018 11:50 AM, Warren Young wrote: > On Jul 27, 2018, at 9:10 AM, Bowie Bailey <Bowie_Bailey at BUC.com> wrote: >> I have a CentOS 7 server that is running out of memory > How do you know that? Give a specific symptom. This was brought to my attention because one program was killed by the kernel to free memory and another program failed because it was unable to allocate

I have an old computer running CentOS 5. I need to add an SATA drive to it, but it doesn't have any ports, so I need an add-on card. The board only has a 32-bit PCI slot. Any recommendations on cards/brands that work well with CentOS? I don't need any raid capabilities, I just need a couple of SATA connections. Thanks, -- Bowie