similar to: gptzfsboot: error 4 lba 30

Hello lists, I,ve compaq ML350 with 2 Xeon 2.4 GHZ and FreeBSD 5.0 RELEASE installed and working very fine about 4 mounts. The machine running GENERIC kernel samba and firebird database server with no problems until at begining of this week, in morning machine freezes with no responce iven in conconsole, no responce from network (pinging) no responce on console (key pressing) the only way to get

Hi, I currently encounter spin lock 0xc0c83ba8 (sio) held by 0xc6337460 (tid 100005) too long panic: spin lock held too long cpuid=3 on hp server with two dual-core intel xeon (3.8GHz) and 3GB RAM. System is 7.1-PRELEASE last fetched 29.11.2008, 17:58 UTC. This happens with VSCom Card that was previously in use in a 5.3-STABLE system (also hp server, but older hardware) without problems. The

I recently put together a new machine w/ a SuperMicro H8SCM and an AMD Opteron 4228 HE... I've having an issue where the clock on the machine skips around... The wierd part is that it's very sudden when it happens... ntp sometimes brings it back, but it can't when the clock gets too far ahread (1000 seconds), ntp dies... In order to catch it happening, I ran a sleep 60 loop

Can anyone help me here? ----- Forwarded message from Larry Rosenman <ler at lerctr.org> ----- Date: Sat, 9 Nov 2013 08:46:26 -0600 From: Larry Rosenman <ler at lerctr.org> To: freebsd-stable at freebsd.org Subject: 10-BETA3: Bad negotiation on AHD controller User-Agent: Mutt/1.5.22 (2013-10-16) Ever since I put 10 on this box (source upgrade from 8), I've been getting slow

Update.? Only a single reboot has occurred since changing defalt_vsz_limit from 384M to 512M.? It would seem that something the users are doing is causing that virtual memory size to be exceeded (possibly a mailbox search?), and when that occurs Dovecot/FreeBSD is not handling the event as smoothly as expected. Here's my dmesg for more basic info. Sep 17 11:25:39 romulus syslogd: kernel boot

Hi, I was trying to rebuild world on a FreeBSD 10 test system, that I had just installed. ZFS root was setup. I let the installation program do all the ZFS setup and configuration. I put root on a 5 disk encrypted raidz array. Besides the installer configuring 5 times the amount of swap space I asked for (asked for 8gb, installer put 8gb on each drive, for 40gb in total.) everything was working

Hi, We have a pretty serious problem with our news server crashing during the expire cronjob. This happened with 4.7-RELEASE, so we upgraded to 4.8-RELEASE recently, hoping that the problem might be fixed, but it isn't. The machine is a Compaq DL360-G2. I've searched the PR database as well as the mailing list archives for the panic string, but didn't find anything. What makes the

My new PC has an internal 16-in-1 card reader connected via USB 2.0. The device is the Techsolo TCR-1640 (http://www.techsolo.de/product/cardreader/tcr_1640/index.php). I boot from a compact flash inserted in it and I can mount and unmount the same CF once the system has booted and has mounted the root partition from my graid3 array. The problem arise when I replace the inserted CF with another

Hello all. I have a supermicro 16 bay box with a LSI 9211-8i card. We use it for temp data storage, and we wanted to try the l4z compression. After updating the source tree to r247839: and doing a make buildworld cycle all works fine. But at boot time we get some warnings. make_dev_physpath_alias: WARNING - Unable to alias gptid/281951f4-a996-11e1-83eb-00259061b51a to enc at

Hi, I've got a problem with booting zfs-on-root FreeBSD 9.2-PRERELEASE. I'm getting: ZFS: i/o error - all block copies unavailable ZFS: can't read MOS of pool klawisz gptzfsboot: failed to mount default pool klawisz Machine is VM running under KVM on Proxmox 2.3-13. VM has 8 GB of RAM, 400 GB of local storage with SCSI Controller type: Default (lsi). I'm not sure what I did to

I have a new system which includes a Plextor PX-740a DVD+-R/RW CD-R/RW drive attached to an Asus A8V-MX motherboard. When I try to use burncd to burn a cd, it writes all of the data, says "fixating CD, please wait.." and then reports burncd: ioctl(CDRIOCFIXATE): Input/output error Oddly enough, the CD seems to be usable. I can successfully burn the same file if I use cdrecord. The

Hi Folks, I've facing an intermittent hang with a USB port which seems cam related: Event's that happen are: o USB modem (HUAWEI E220) plugged into PC ugen3.2: <HUA WEI> at usbus3 u3g0: <3G Modem> on usbus3 u3g0: Found 3 ports. umass0: <USB MASS STORAGE> on usbus3 umass0: SCSI over Bulk-Only; quirks = 0x0000 umass0:6:0:-1: Attached to scbus6 umass1: <USB

I have an Asus A8V-MX motherboard with an AMD Athlong 64 X2 3800+ CPU and I'm trying to run powerd to keep it cooler/quieter/greener. I'm running -STABLE (6.1-RC) cvsup'ed a couple of days ago, with a kernel config that consists of the SMP sample plus an atapicam device. I'm loading the cpufreq.ko module in /boot/loader.conf. I've attached my dmesg output and sysctl -a

Hi all, Trying to upgrade a system from 9.0-RELEASE to 9.1-PRE from yesterday on my machine (GEOM+ZFS mirror setup on ada[01]p3), the new kernel becomes unable to mount root... The only way to recover is to boot from 9.0 kernel. The disks were already named ada[01] in 9.0, so I suspect nothing there... I tried - disabling AHCI in bios (no change seen) - change cables, check PSU, test disks

So, I've long known and it makes sense that when you're booted from a ZFS volume, you can't mess with the boot-loader. And, I know a few months ago I had a set of commands I would use when booted from a CD that would initialize the network and copy the "release/boot" from somewhere else so that I could install bootblocks and boot-loaders from more recent code. Sadly, I

Hi there We have a pair of servers running FreeBSD 9.1-RC3 that act as transparent layer 7 loadbalancer (relayd) and pop/imap proxy (dovecot). Only one of them is active at a given time, it's a failover setup. From time to time the active one gets in a state in which the 'thread taskq' thread uses up 100% of one cpu on its own, like here: ---- PID USERNAME PRI NICE SIZE

Hi, FreeBSD-9 works fine on this Lenovo T400 - except that suspending with no USB devices plugged in result in no ports working after resume. If I have a device plugged in during suspend - on any port - then all the ports work fine after resume. I've attached usbconfig and acpidump output. here's what is logged in the kernel buffer during suspend and resume: Her'es the suspend:

Hello, I have a server pfsense in bridge mode to function as transparent FW, the problem is that once I connect the pfsense between my router core and my core switch catalyst a few seconds begin to appear several messages like these: em2: watchdog timeout - resetting em2: watchdog timeout - resetting em2: watchdog timeout - resetting em2: watchdog timeout - resetting And the connection falls

another attempt: # upsd Network UPS Tools upsd 2.6.5 fopen /var/db/nut/upsd.pid: No such file or directory listening on 127.0.0.1 port 3493 listening on ::1 port 3493 Can't connect to UPS [senpro] (riello_ser-senpro): No such file or directory # ls -la /var/db/nut/ total 12 drwx------ 2 _ups wheel 512 Jul 30 10:22 . drwxr-xr-x 10 root wheel 512 Jul 29 16:41 .. -rw-r--r-- 1 _ups

Here is what I did: # cd /root/nut/ # nut here it's checkouted repository # ./configure --with-user=_ups --with-group=_ups # cd drivers/ # make riello_ser # chgrp bin riello_ser # cp riello_ser /usr/local/bin # here I copied builder driver to folder where nut-package will store their files/drivers # pkg_add nut-2.6.5p1 # ls -la /dev/tty00 crw-rw---- 1 _ups _ups 8, 0 Jul 30