similar to: Tipp-lite SU1500XL

> Lots of good progress here! I tried to enable a few more commands for > your model. For instance, the "M" values seem to be min/max voltage, > so there is a "reset.input.minmax" command to use with upscmd. Also, > you can trigger a battery test with "test.battery.start". I assume the > work the same way as on Protocol 3003 :-) Hello Charles, The

Hello List, David: I’ thanking you … :-) I’m using the tripplite_usb driver and the barcode on mine says: 9347AIOBC470902728 or 9347A10BC470902728. with pictures… https://drive.google.com/file/d/1SJWDr0g95KOD-FpbOPHUyl9bsbOKePlD/view?usp=sharing https://drive.google.com/file/d/1SFMT-GbZRcRO03gEy_7SszZ43-LYmEZM/view?usp=sharing

Device manufacturer and name: Tripp-Lite OmniSmart500 upsc output: matt at backup:/etc$ sudo upsc tripplite battery.charge: 100 battery.test.status: Battery OK battery.voltage: 14.56 battery.voltage.nominal: 12 device.mfr: Tripp Lite device.model: OMNISMART500 device.type: ups driver.name: tripplite_usb driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.version: 2.4.3

Hello, We are trying to develop a mechanism to power cycle Tripp Lite UPS. When we checked the upscmd, looks like the only command we can use is shutdown.reboot(sudo upscmd -u user -p password ups shutdown.reboot). Because the PC is connected to UPS directly and we would prefer shutdown PC before power cycle the UPS. But if we run shutdown PC first it won't run the power cycle the UPS script

Hello, We are trying to develop a mechanism to power cycle Tripp Lite UPS. When we checked the upscmd, looks like the only command we can use is shutdown.reboot(sudo upscmd -u user -p password ups shutdown.reboot). Because the PC is connected to UPS directly and we would prefer shutdown PC before power cycle the UPS. But if we run shutdown PC first it won't run the power cycle the UPS script

Hello List members, Are there any other commands available for this UPS, I've been searching without success... I know I use an old UPS, and when I do: "upscmd -l pbx at 192.168.1.18" for instance, I get the answer: "Instant commands supported on UPS [pbx]: shutdown.return - Turn off the load and return when power is back" If I send this command it works, shutdowns

[moving this to nut-upsuser, since other users of Tripp Lite equipment may have specific experience with this.] On Jun 17, 2014, at 7:51 PM, Shen Chuan <shen at minutekey.com> wrote: > We are trying to develop a mechanism to power cycle Tripp Lite UPS. When we checked the upscmd, looks like the only command we can use is shutdown.reboot(sudo upscmd -u user -p password ups

Hello Charles, Thank you for your comment. Just tried to use ups.delay.shutdown to postpone the UPS shutdown. The thing is that if the PC shutdown first, then the UPS, it wasn't able to send "shutdown.reboot" any more because everything is power off after the UPS shuts down. Also play on the watchdog for Tripp Lite. Looks like it has the command of reset.watchdog but not

After a quick glance, it looks like that older version of the INTERNET750U supports only a few controls Shutdown of the inverter, cancelling that shutdown, setting the delay for the shutdown timer, and enabling/disabling a USB watchdog function. My *guess* is that Network UPS Tools is just exposing the shutdown command as one command. Does that help? Note to users with the same model but

Thanks. Looks like an older SKU, so I'll look into it when I am back in the office later this week. ________________________________ From: Jean-Roch Blais <blaisjeanroch at gmail.com> Sent: Tuesday, December 31, 2019 8:04:34 PM To: David Zomaya Cc: nut-upsuser at alioth-lists.debian.net Subject: Re: [EXTERNAL] [Nut-upsuser] Tripp Lite INTERNET750U instant commands ? Hello List, David:

Thank's David, really appreciate your answer, and your time. Just a yes or a no, can I upgrade the firmware on this UPS ? Cheers jrb On Fri, Jan 3, 2020, 19:06 David Zomaya, <David_Zomaya at tripplite.com> wrote: > > After a quick glance, it looks like that older version of the INTERNET750U > supports only a few controls Shutdown of the inverter, cancelling that >

Hello Charles, Thank you for all of your help this far. I have made some great progress. I was hung up with all sorts of USB problems which we can chalk up to a "blonde moment" for me (or more accurately, a *bald* moment). In all my starting over and screwing around, I had forgotten to reinstall libusb-compat. Duh! I am now to a point that I think we can dig a little deeper. The

2015-03-11 14:21 GMT+01:00 Jakub Scepka <jakub.scepka at gmail.com>: > Would you be so kind and provide some examples (commands), please? > I would run them today in the evening and report back with the logs. First, be sure to have in upsd.users a valid entry to set vars and execute instant commands: [<username>] password = <password> actions = SET instcmds = ALL where

Hi Jean-Roch, No. There is no user-facing firmware update process available. If there are any particular commands you're interested in on a newer unit, I can look them up. ________________________________ From: jean-roch blais <blaisjeanroch at gmail.com> Sent: Friday, January 3, 2020 6:13 PM To: David Zomaya Cc: nut-upsuser at alioth-lists.debian.net Subject: Re: [POSSIBLE FRAUD] Re:

All, I recently purchased a Tripp-Lite OmniVS1500XL and am running NUT on a Centos-based system. Based on the compatibility list I specified the tripplite_usb driver. When I query the unit I get: [root@chryxus ~]# upsc UPS@localhost battery.voltage.nominal: 24 driver.name: tripplite_usb driver.version: 2.0.3-pre2 driver.version.internal: 0.6 input.voltage.nominal: 120

From: Charles Lepple <clepple at gmail.com> Date: Thu, 11 Jan 2018 22:31:54 -0500 The trick will be adding support for this without breaking other models. For whatever it's worth, Tripp lite's software does not display the model number anywhere, so it may be treating all models the same. In case you are interested, this mapping between the "Path" and the

Ok thank's for your time David, the PSUs, I have two old ones, are working very well. I simply put in new batteries and on they go :-). I'm using the PSUs mostly to secure my Raspberry PIs, which are notorious to fail (SD card) on power failures. Bye, jrb. On Fri, Jan 3, 2020 at 7:35 PM David Zomaya <David_Zomaya at tripplite.com> wrote: > > Hi Jean-Roch, > No. There is no

Thank you for the commands... Please find attached log... Im not sure if the Load.on worked, because in the end I had to manually start the UPS (with button). Anyway, let me know should I need to perform some steps again (probably yes, since I believe it was off). Jakub On 11.03.2015 20:11, hyouko at gmail.com wrote: > 2015-03-11 14:21 GMT+01:00 Jakub Scepka <jakub.scepka at

This is the patch to include SVN revision level in version number displays. There should be two enclosures; the patch itself and a new source file. common/upsversion.c. upversion.c defines a single function. upsversion(), that returns a version string for display. Some Makefile trickery ensures that this file will be recompiled whenever the project's SVN revision level has changed since it

Gabor: note, these HCL reports go to the nut-upsdev list. Begin forwarded message: > From: Gabor Tjong A Hung > Subject: Re: Network UPS Tools - Compatibility List > Date: September 3, 2013 2:18:31 PM EDT > > Sorry, > I just noticed the "If your device isn?t listed" part: > > [HCL] Forza FX-1500LCD supported by blazer_usb > > > [root at freenas] ~#