similar to: problems with the mfi

Hi all, We have a server with a LSI 9240-4i controller configured in JBOD with 4 SATA disks. Running FreeBSD 9.1-Beta1: Relevant dmesg: FreeBSD 9.1-BETA1 #0: Thu Jul 12 09:38:51 UTC 2012 root@farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64 CPU: Intel(R) Xeon(R) CPU E31230 @ 3.20GHz (3200.09-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x206a7 Family = 6 Model =

> On 28/10/2011 04:14, Jan Mikkelsen wrote: > >/ Hi, > />/ > />/ There is a patch linked to from this PR, which seems very similar: > />/ > />/ http://www.freebsd.org/cgi/query-pr.cgi?pr=kern/140416 > />/ > />/ http://lists.freebsd.org/pipermail/freebsd-scsi/2011-March/004839.html > />/ > />/ The problem is also consistent with running

Hi all, Setup: I'm running 2 machines (amd64, 16GB) with FreeBSD 9-STABLE (Mar 14 so far) acting as NFS servers. They each serve 3 zpools (holding a single zfs, hourly snapshots). The zpools each are 3-way mirrors of ggate devices, each 2 TB, so 2 TB per zpool. Compression is "on" (to save bandwith to the backend, compressratio around 1.05 to 1.15), atime is off. There is no

I finally got a 10G card that is recognized by FreeBSD (9.1-stable): ... ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 2.4.8> port 0xecc0-0xecdf mem 0xd9e80000-0xd9efffff,0xd9ff8000-0xd9ffbfff irq 40 at device 0.0 on pci4 ix0: Using MSIX interrupts with 9 vectors ix0: RX Descriptors exceed system mbuf max, using default instead! ix0: Ethernet address: 90:e2:ba:29:c0:54

Well this is new. I haven't a clue what Dell has done on this R620, but this popped up today after I did a boat load of BIOS updates and tried to install stable/9 from our yahoo tree. If anyone sees the obvious solution here, I'd love to figure it out. found-> vendor=0x14e4, dev=0x165f, revid=0x00 domain=0, bus=2, slot=0, func=1 class=02-00-00, hdrtype=0x00, mfdev=1

On reboot, one out of 10 times, reboot (from hardware initialization) stops. Referring to this portion of the dmesg -v output, of a successful boot, where i have marked ">>>HERE<<<" is where the boot freezes on an unsuccessful boot. This is a constnat problem, on 6.2 as well as 6.3 unchanged. ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire acd0: setting

Ok, So this is really more of an observation than anything else.? I had a FreeBSD 10.1 server that was running great. Some SSL issue came up, or I upgrade Dovecot in ports - something occurred and the machine started rebooting randomly.? It would run for 2 weeks, then reboot.? It might run for 5 days and then reboot. So I started doing more FreeBSD upgrades, thinking it was a kernel issue. The

Update.? Only a single reboot has occurred since changing defalt_vsz_limit from 384M to 512M.? It would seem that something the users are doing is causing that virtual memory size to be exceeded (possibly a mailbox search?), and when that occurs Dovecot/FreeBSD is not handling the event as smoothly as expected. Here's my dmesg for more basic info. Sep 17 11:25:39 romulus syslogd: kernel boot

Hi there We have a pair of servers running FreeBSD 9.1-RC3 that act as transparent layer 7 loadbalancer (relayd) and pop/imap proxy (dovecot). Only one of them is active at a given time, it's a failover setup. From time to time the active one gets in a state in which the 'thread taskq' thread uses up 100% of one cpu on its own, like here: ---- PID USERNAME PRI NICE SIZE

Hi folks; I have acquired a rackmount Intel server with a RAID card in it that appears to be compatable with the MFI driver. To put it mildly, this thing SMOKES! It is SCREAMING fast. Insane, in fact. Ok, enough supurlatives. Now the question is this - exactly what board(s) will this driver support? Is it only the two that are listed in the hardware release notes? LSI has a number of

Hi, I will soon be committing a change to MachineFrameInfo::CreateStackObject that removes the "bool MayNeedSP" parameter. This API change is part of larger patch that re-works stack layout passes to use analysis from the StackProtector pass to layout StackProtected objects (http://llvm-reviews.chandlerc.com/D2158). Out of tree targets will need to update their usage accordingly. The

Hello everybody, we recently got three Dell PowerEdge servers equipped with Qlogic QLE2462 cards (dual FC 4Gbps ports) and an EMC CLARiiON CX3-40 SAN. The servers with the FC cards were successfully and extensively tested with an older SUN StorEdge T3 SAN. However, when we connect them to the CX3-40, create and mount a new partition and then do something as simple as "tar -C /san -xf

Hi, between March 16 and now, bge on a Sun X2200 stopped working, turning off msi (via hw..pci.enable_msi=0) got it working again. I tried first replacing bge with an older version but that did not help. please advice :-) Danny

Hi, this server, a Dell R720 has 4 bge on board, Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000 bge0: APE FW version: NCSI v1.1.7.0 bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E miibus0: <MII bus> on bge0 ... I have connected the ethernet to port labeled 0, but it appears as bge2, how can this be corrected? thanks, danny

Hi, on 2 different servers, running 7.1-stable + zfs, I get this error rather frequently: Feb 5 17:01:03 warhol-00 kernel: impossible packet length (543383918) from nfs server sunfire:/dist Feb 5 17:01:03 warhol-00 kernel: impossible packet length (1936028704) from nfs server sunfire:/dist Feb 5 17:01:03 warhol-00 kernel: impossible packet length (1869363744) from nfs server sunfire:/dist

hi, lsof on freebsd 9.1: COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME ntpd 1707 root cwd unknown file system type: newnfs ntpd 1707 root rtd unknown file system type: newnfs ntpd 1707 root txt unknown file system type: newnfs ntpd 1707

Hi list, since we activated 10gbe on ixgbe cards + jumbo frames(9k) on 9.0 and now on 9.1 we recognize that after a random period of time, sometimes a week, sometimes only a day, the system doesn't send any packets out. The phenomenon is that you can't login via ssh, nfs and istgt is not operative. Yet you can login on the console and execute commands. A clean shutdown isn't possible

I've been trying to sync two directories under interix between two machines on the local network and I keep getting the flowing errors:- The first error is "failed: Bad address (14)" which always occurs rsync: readlink "/dev/fs/D/Media/Audio/The Hoosiers/desktop.ini" failed: Bad address (14) The second is randomly occuring, restarting will make it continue for a bit then

hi, I have a hard time figuring this out, the kernel says: ... ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 2.5.15> port 0xecc0-0xecdf mem 0xd9e80000-0xd9efffff,0xd9ff8000-0xd9ffbfff irq 40 at device 0.0 on pci4 ix0: Using MSIX interrupts with 9 vectors ix0: Ethernet address: 90:e2:ba:29:c0:54 ix0: PCI Express Bus: Speed 5.0GT/s Width x8 ix1: <Intel(R) PRO/10GbE

I got a Dell T110-II server on 2013-July-19. It has two 1Tbyte drives that the PERC H200 controls, RAID 1. I tried to install FreeBSD-9.1-RELEASE from a DVD from FreebsdMall. The autopart segfaulted, evidently because it could not find any disks. I think there is a PR about the segfaulting (bad bug, no messages). I worked around the problem by going to the loader prompt when the initial