similar to: nut driver for SMS (brazil) UPS

Hi, Recently I got three units of this nobreak [0]: The intention is connect it with some file server and/or web server. I found the NUT via FreeNAS [1] , and the contribuition [2] of Ulisses and Rodrigo about this vendor SMS, in Brazil. But, initially, i'm trying to apply the Ulisses patch (for smsbrasil driver) in a Debian Server, with no success. Can anyone help me about the patch in

please subscribe to the list: http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsdev On Feb 19, 2014, at 7:52 AM, Thiago Tiedtke dos Reis wrote: > If I try to access the port /dev/ttyUSB0 using minicon (minicom -D /dev/ttyUSB0) or cat ( cat /dev/ttyUSB0 ), the access to device is denied. even as root? > Then, I try these instructions [0], but nothing changes when I try to

I discovered that the ups returns power from shutdown.reboot after 8-10 minutes. (530s on 1st attempt and 554s on 2nd). But it does not execute its power-on self test. It turns on only. Rodrigo -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20130626/6bc74fc3/attachment.html>

On Feb 18, 2014, at 5:55 PM, Thiago Tiedtke dos Reis wrote: > Hi, > > Recently I got three units of this nobreak [0]: ... > [0] http://www.sms.com.br/produtos/Nobreak-SMS/Manager-III-Senoidal According to the HCL, for the Manager III, you might want to try the blazer_ser (or in 2.7.1, nutdrv_qx): http://www.networkupstools.org/stable-hcl.html -- Charles Lepple clepple at gmail

Hello, I have tried to use the blazer_ser driver to interface with my UPS. nut is not able to detect the UPS. I have not been able to find much info regarding Socomec UPS support in nut. Socomec does publish a description of the serial protocol for these UPS's, which can be found here: http://www.socomec.com/download-jbus-modbus.html(select UPS OTHER for device model, 1-5KVA for device power

On Feb 18, 2014, at 10:15 PM, Charles Lepple wrote: > On Feb 18, 2014, at 5:55 PM, Thiago Tiedtke dos Reis wrote: > >> Hi, >> >> Recently I got three units of this nobreak [0]: > ... >> [0] http://www.sms.com.br/produtos/Nobreak-SMS/Manager-III-Senoidal > > According to the HCL, for the Manager III, you might want to try the blazer_ser (or in 2.7.1,

Hi, The new version of smsbrasil driver for NUT is available for testing, at http://www2.dem.inpe.br/ulisses/smsbrasil-0.0.2.tar.gz. I'm waiting feedback, suggestions and bug reports. The file includes the source code (smsbrasil.c) and the text file smsbrasil.txt. This last one must be converted to smsbrasil.8 (manpage). The english text request a revision since it is not my native

Hello I used https://wiki.samba.org/index.php/Migrating_a_Samba_NT4_Domain_to_Samba_AD_(Classic_Upgrade) to migrated my old samba 3, i created a dc and a member file server, but on member i can't see id for usernames and groups. This is my smb.conf on dc [global]         netbios name = DC1         realm = LXCERRUTI.COM         server role = active directory domain controller        

Hello list, I'm trying to get some old windows Win95/98 games to run without too much luck. This example is a Sierra Hoyle Classic Games CD from 1998, which should be enough to keep my wife happy without having to reboot my computer back into windows...if I can get it to work. The installer itself runs fine, and even plays a sample sound clip to test the sound before installing. After

I have the following function f <- function { ... model <- lm(rttx[,1] ~ rttx[,2] + 0); summary(model); ... } while summary(model) shows the summary if I execute the function line by line in the Command Line Interface, if I call f() summary is silent how to solve it? or is there workaround? thanks in advance Ulisses Debian GNU/Linux: a dream come true

Hi all I'm running succesfully 2.2.19pre13ext3 as mentioned in the subject line, I would like to increase the journal file I have the jfs/* and ext3/* files and I believe that: + asigning a new journal (-o journal=[new inode or increased inode]) data can solve it + increasing the actual file _appending zeroes_ to it can be used to increase it online, however the new space will not be

Hi Charles, I'll try the blazer_ser and the nutdrv_qx with version 2.7.1 later. Below, the result of 'lsusb -vvv' requested: Bus 004 Device 002: ID 04b4:5500 Cypress Semiconductor Corp. HID->COM RS232 Adapter Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.00 bDeviceClass 0 (Defined at Interface level)

Good day everyone, I'm trying to run .speex audio files in VLC. So I found a link to libspeex in VLC website, and I downloaded the package. Anyway, I don't know how to install it from now, once it's in a tar.gz format. Do I have to extract the files and paste it in VLC folder? P.S.: I'm using Win7. Thx a lot. Best regards, Ulisses -------------- next part -------------- An

The example scene: I have a database with stats about each goal made by my soccer team. This database (a data frame in R) is organized in lines (goals) with a set of columns containing data about these goals (player name, tactic position, etc). For now, this database will be called "data.frame1". What I need is to feed this "data.frame1" with new information about my team

Hi all I'm trying to boot with initramfs I build my own root fs, and the kernel build links it, I have double checked this when the kernel boots unpack_to_rootfs() returns no error, so it continues and .... when It tries to mount the rootfs it tries to mount from an IDE device (where the kernel was built from), and not from the initramfs "image" I think this is not documented

v2: - Fix seeding. - Add a test that nbdkit-random-plugin is producing something which looks at least somewhat random. Rich.

Hi everyone, I'm trying to use Opus in an Embedded Project which I'm developing in a STM32F429IIT6 microcontroller. Currently, I'm playing wav files in it. I ported all the files from OpusLib 1.1.4 needed to compile the project, but when I try to create and OpusDecode state, it returns the error -7 (OPUS_ALLOC_FAIL). I'm compiling it with the USE_ALLOCA flag. I also tried to

Hi, I need to make a plot of data from multiple epochs, and so I'd need to introduce a couple of breaks in the x-axis not to have too many empty space in my plot. I discovered a function in the package "plotrix" which makes breaks in axis, but it is not what I was actually looking for, because it doesn't really introduce the a range gap or rescale the plot according to the

Hi, does anyone know how do I plot confidence intervals as a shaded band around a curve, rather than as errors bars? many thanks, ulisses. [[alternative HTML version deleted]]

Hello everybody I am trying to process audio files in R and had some problems with files size. I?m using R packages 'audio' and 'sound'. I?m trying a really simple thing and it is working well with small sized .wav files. When I try to open huge audio files I received this error message: "cannot allocate vector of size 2.7 Gb". My job is open in R a 3-hour .wav file,