similar to: pool metadata has duplicate children

Hello all. I have a supermicro 16 bay box with a LSI 9211-8i card. We use it for temp data storage, and we wanted to try the l4z compression. After updating the source tree to r247839: and doing a make buildworld cycle all works fine. But at boot time we get some warnings. make_dev_physpath_alias: WARNING - Unable to alias gptid/281951f4-a996-11e1-83eb-00259061b51a to enc at

Hi. If I create a zpool with the following command: zpool create tank raidz2 da0 da1 da2 da3 da4 da5 da6 da7 and after a reboot the device names for some reason are changed so da2 and da5 are swapped, either by altering the LUN setting on the storage or by switching cables/swapping disks etc.? How will zfs handle that? Will it simply acknowledge that all devices are present and the pool is

Machine is 4.8-STABLE smaug# camcontrol devlist <COMPAQ BD009122BA 3B07> at scbus0 target 0 lun 0 (pass0,da0) <COMPAQ BD009122C6 B016> at scbus0 target 1 lun 0 (pass1,da1) <COMPAQ BD009122BA 3B07> at scbus0 target 2 lun 0 (pass2,da2) <COMPAQ BD00962373 BCJE> at scbus0 target 3 lun 0 (pass3,da3) <IBM IC35L018UCPR15-0 S70H>

A problem with 4.8 reported by myself and Aaron D. Gifford. Anyone in -stable who knows more? ******** I'm assembling a Compaq 1850R with attached storage system. For the built in scsi controller (sym), there are three drives internally on channel 1 + 5 drives externally on channel 2. During boot, I can see all disks being identified first by the machine itself and then in the early part

Hi All, I am looking at ZFS and I get that they call it RAIDZ which is similar to RAID 5, but what about RAID 10? Isn''t a RAID 10 setup better for data protection? So if I have 8 x 1.5tb drives, wouldn''t I: - mirror drive 1 and 5 - mirror drive 2 and 6 - mirror drive 3 and 7 - mirror drive 4 and 8 Then stripe 1,2,3,4 Then stripe 5,6,7,8 How does one do this with ZFS?

Hi. On one of my fresh installed servers I am seeing the following output during boot: gptzfsboot: error 4 lba 30 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 30 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot:

My new PC has an internal 16-in-1 card reader connected via USB 2.0. The device is the Techsolo TCR-1640 (http://www.techsolo.de/product/cardreader/tcr_1640/index.php). I boot from a compact flash inserted in it and I can mount and unmount the same CF once the system has booted and has mounted the root partition from my graid3 array. The problem arise when I replace the inserted CF with another

Hi, Here i have been a matrix like this, *NAME AGE PALCE TRUE/FALSE* ABC 20 INDIA XYZ 30 FRANCE PQR 40 USA MNO 30 KENIYA DEF 25 AUSTRALIA Here,* TRUE/FALSE* Column containing empty values. So my requirement what is , need to change all the *TRUE/FALSE *column value into "*TRUE*" where *AGE =

Hi all Having managed ZFS for about two years, I want to post a wishlist. INCLUDED IN ZFS - Mirror existing single-drive filesystem, as in ''zfs attach'' - RAIDz-stuff - single and hopefully multiple-parity RAID configuration with block-level checksumming - Background scrub/fsck - Pool-like management with multiple RAIDs/mirrors (VDEVs) - Autogrow as in ZFS autoexpand NOT

Hi. I''m all set for doing performance comparsion between Solaris/ZFS and FreeBSD/ZFS. I spend last few weeks on FreeBSD/ZFS optimizations and I think I''m ready. The machine is 1xQuad-core DELL PowerEdge 1950, 2GB RAM, 15 x 74GB-FC-10K accesses via 2x2Gbit FC links. Unfortunately the links to disks are the bottleneck, so I''m going to use not more than 4 disks, probably.

Hi I have a quad processor Compaq Proliant 5500. The output from dmesg seems strange (I have also sent a copy to freebsd-smp to ask about smp issues) and there are also some performance issues which I suspect are smp related. Could anyone who fels so inclined please take a look at the output and let me have any comments. Thanks _______________________________ Copyright (c) 1992-2002 The

Hi, I am using FreeBSD 8.2 and went to add 4 new disks today to expand my offsite storage. All was working fine for about 20min and then the new drive cage started to fail. Silly me for assuming new hardware would be fine :( The new drive cage started to fail, it hung the server and the box rebooted. After it rebooted, the entire pool is gone and in the state below. I had only written a few

I've just had a 4.9p1 system partially deadlock for about 30 minutes and then spontaneously(?) recover. The "ps" results point at vinum. I've never seen this before and don't recall anything like this being mentioned here before. At the time, I had two find's running in a large NFS mounted filesystem and was doing a "cvs -d /usr/ncvs -R checkout -P ports" from

I am not too familiar with Cairo and RGtk2 and have the following problem: I have a container with two GTK drawing areas converted into Cairo devices. I know that I can set the current drawing context e.g. using dev.set(). But this is tedious. How can I set the context using the objects da1 or da2? w <- gtkWindow() w$setSizeRequest(400, 400) vbox <- gtkVBox() da1 <- gtkDrawingArea()

I put this to the smp list and to stable but have had no takers from wither. nThere are both smp and other system issues and I am just wondering if anyoe would be willing to take a look at this output from dmesg and let me have some advice Thanks david ----- Original Message ----- From: "vizion communication" <vizion@ixpres.com> To: <freebsd-smp@freebsd.org> Sent:

Hi, I have some problems with usb da and uscanner giving me I/O-errors. This is on a ASRock K7VT2 board. If there is anything else I could do (testing patches, providing further info), please let me know. 4.8-STABLE from 04.08.2003: - MBO USB-MultiCardReader 6-in-1 mount_msdos => Input/output error - Epson Perfection 1260 Scanner scanimage --test => Error during device I/O

Hi all, I first create a matrix/data frame called "d2" if another matrix accomplishes some restrictions "dacc2" da2<-da1[colSums(dacc2)>9,] da2<-da2[(da2[,13]=24),] write.csv(da2, file =paste('hggi', i,'.csv',sep = '')) The thing is if finally da2 cannot get/passs the filters, it cannot writte a csv because there is no any true condition.

Hi ... Can someone tell me whether or not this is indicative of a hardware, or software, problem? It happened a few times today, on two different drives, and it seem to "self-recover", since the server is still purring along without any noticeable problems: neptune# grep "timed out" /var/log/messages Jul 25 03:52:51 neptune /kernel: (da2:ahd1:0:2:0): SCB 0x40 - timed out

Can anyone help me here? ----- Forwarded message from Larry Rosenman <ler at lerctr.org> ----- Date: Sat, 9 Nov 2013 08:46:26 -0600 From: Larry Rosenman <ler at lerctr.org> To: freebsd-stable at freebsd.org Subject: 10-BETA3: Bad negotiation on AHD controller User-Agent: Mutt/1.5.22 (2013-10-16) Ever since I put 10 on this box (source upgrade from 8), I've been getting slow

Hi Steven, Read/Write errors are recorded when an active path of the geom_multipath device is pulled while running the i/o on dataset created for the pool. Running I/o on dataset using dd. *Freebsd version :* 9.0 *Patch imported from stable 9 : *r229303, r234916 *zpool status:* * * pool: poola state: ONLINE scan: none requested config: