similar to: rsync bug with --relative and --delete fixed in CentOS5?

Yohoo! I have some issues with the smartd in CentOS5/x64 I edited the /etc/smartd.conf for my needs and restarted the smartd with "service smartd restart". But the start script is overriding my file. I checked it and saw the following lines: ---------------/etc/init.d/smartd------------ case "$1" in start | reload | restart) GEN_CONF="*SMARTD*AUTOGENERATED*" [ !

Hi all! I tried to use CentOS5 on an IBM Thinkpad R52 which has an Intel PRO/Wireless 2915ABG Mini-PCI Adapter installed. I downloaded the firmware from the DAG-Repo (afaik 3.0.0) and added a "alias eth1 ipw2200" to modules.conf. After the module was loaded successfully (including the firmware) I was able to configure the card. For simplicity I didn't use any encryption. My

Yohoo! Is there a repository for CentOS5 with VDR? On http://www.cadsoft.de/vdr/ I only find the sources, but no rpms. Thanks! Christian Volker Technical Support Engineer -- Parnell House, Barrack Square, Ballincollig, Co. Cork, Ireland

I am playing with a new machine I just got in and it is dying on boot... I'm wondering if it is to much machine for Centos to run.. It is a Generic machine using a Tyan Thunder motherboard running (8) eight dual core AMD 855 cpu's with 128 gig of ram, not 128 meg, but 128 gig of ram. (2) SCSI 146 Seagate Drives. ATI Graphics built onto the board. The error I'm seeing is on

Hi all, I am running some Centos 5.0 x86_64 servers as host os for vmware server 1.0.3 on both Opteron and Xeon systems. They are all running fine and stable. But now I am in doubt to upgrade to 5.1. Has any one done that yet, upgraded his vmware hosts with Centos/RHEL 5.0 to 5.1 ? tia + best regards, matthias

On Tue, Jun 30, 2015 at 04:49:13PM +0200, Luigi Toscano wrote: > On Tuesday 30 of June 2015 15:22:27 Richard W.M. Jones wrote: > > It has been a ludicrously long time (over 8 months) since the last > > stable release of libguestfs. So I'd like to plan a new 1.30 release > > soon. > > > > Please follow-up if there are features / blockers / bugs that need to

It has been a ludicrously long time (over 8 months) since the last stable release of libguestfs. So I'd like to plan a new 1.30 release soon. Please follow-up if there are features / blockers / bugs that need to be addressed for 1.30. As usual, bugs which have "1.30" (without quotes) in the Devel Whiteboard field in Bugzilla are nominated as blockers for the release. You can see

Hello, I know this subject as been talked many time, but i can not figure out how to get rid of this... ENV : ruby 1.8.4, ferret 0.11.4, acts_as_ferret 0.4.1 under win32 Error : Asked for a remote server ? nil, ENV["FERRET_USE_LOCAL_INDEX"] is nil, looks like we are not the server Will use local index. My application is working find, with 4 mongrels, but i got this message on

On Tuesday 30 of June 2015 15:22:27 Richard W.M. Jones wrote: > It has been a ludicrously long time (over 8 months) since the last > stable release of libguestfs. So I'd like to plan a new 1.30 release > soon. > > Please follow-up if there are features / blockers / bugs that need to > be addressed for 1.30. I propose to have virt-dib included. The newer review request was

Yohoo! We want to authenticate our Cisco admins to freeradius. This should authenticate to our running AD (W2003Srv). Googling for freeradius and AD tells me to use ntlm_auth. For ntlm_auth I need a running winbindd. And kerberos. And there's my problem. Status: I configured the /etc/krb5.conf "kinit admin@MY.DOMAIN" asks for the password and gives me a ticket for one week.

Hi List, I'm currently setting up an openldap server and included the following lines in my slapd.conf : modulepath /usr/lib/ldap moduleload back_hdb after finishing up my config and i run slaptest on it i get an error saying that the modulepath doesn't exist. I checked and it indeed isn't there , in fact i can find it anywhere on my system (centos 5.7). the packages i've

hi all, I use rsync to copy/backup ALL my stuff to another disk. When I run this seems like my machine (4 GIG ram centos 5.1) now begins to swap out more programs. Is there a way to reduce that swapping? I am running with echo 1 > /proc/sys/vm/swappiness I simply mount /dev/sdc1 /mnt/backup; mkdir /mnt/backup/month.day.year then rsync -a /home /mnt/backup/mon.day.year This is approximately

Hi there, I have the lucky task to setup a Xen system. my plateform is a dell 2950 with 16Gb of RAM. I got as far as setting up debian sarge and xen following http://www.debian-administration.org/articles/423 and overcoming some specific difficulties (http://kmuto.jp/b.cgi/debian/d-i-2615.htm & http://wiki.ncsa.uiuc.edu/wiki/Dell_PE1950_NIC_Firmware_Workaround) But, my concern now, while

Hello, I have just performed a yum update on my Fedora 5 machine, which I think included a samba update, and I cannot connect from WinXP to the shares defined on Fedora. When I select the samba server from WIndowsXP, a dialog box prompts for the userid and password. When userid and password are entered the dialog box just redisplays and I am not logged on, no matter how many time I try. I

Using Samba 3.0.23a-1.fc5.1 When I try to add XP workstation to the domain using Network ID wizard (from XP) it fails. add machine script is: /usr/sbin/useradd -d /dev/null -g 500 -s /bin/false -M %u What happens is a unix account (in passwd file) is created with LOWER-CASE username. Account is added to smbpasswd in UPPER-CASE. XP reports error "A device attached to the system is not

Hi, i try to set up a samba print server with cups, but when i use the cupsaddprinter command, all copy start & stop with no problem, and when the rppcclient command is launch to add the printer driver, it fails and show me this error: # cupsaddsmb -v -U root -a [...many lines...] result was WERR_INVALID_PRINTER_NAME I try to find somthing on the net and other ML & i find this to

I have just installed Fedora Core 5 with the Samba server. However only the nmbd daemon is running. I thought both smbd and nmbd should be running. On trying to start smbd with: >/sbin/service smb start the result is "starting smbd [FAILED]" Stopping smbd of course has no effect, and starting or restarting nmbd works just fine. I'm stumped! I turned SELinux and the firewall off.

Hi I''ve just installed SUSE linux, downloaded RADRAILS, and extracted it to /home/myname/bin/radrails. When i try to run it i get the red radrails logo and then it gives me an error and stops loading. Its my first day using Linux, previously i have used windows, so any help is greately appreciated. Here is the log file with the errors in it : chrisr@s213:~> cat

Dear All, I'm trying to install CentOS5 beta as paravirtualized guest on a CentOS5 Xen host using virt-manager. Everything seems to go OK. I'm able to run virt-manager and fill-out all the details. Because you can only do a http/ftp/nfs install when setting up a paravirtualized guest using virt-manager, I made the whole contents of the CentOS5 beta DVD available via ftp. The start of

Greetings, I have tried a few days on an off to get samba to work, but need some help. Samba version Samba 3.0.23a-1.FC5.1 Linux Fedora 5 (localhost) User: dsmith 192.168.1.104 Windows XP SP2 with lastest updates (T2385) User: dan 192.168.1.100 Linksys 8 port router I found a couple problems with the checklist and fixed them. A couple problems I wasn't able to solve. Here are the