similar to: theora-dev Digest, Vol 80, Issue 6

Good day! I create diagram of encoder process. Using it i create implementation of encoder in FPGA (Xilinx/Altera). Please critique it. Is there missing stages? Here is blog http://developer-fpga.blogspot.com/ Here is picture of encoding stage 1 https://lh4.googleusercontent.com/-NV8o9DG3jvE/TYjYXr-dYGI/AAAAAAAAAos/U06O-YvhSI0/s1600/stage1.jpg Here is picture of encoding stage 2

Here http://lists.xiph.org/pipermail/theora/2004-September/000619.html Andrey describe encoder structure, this like: "I see the following structure of the compressor implemented in the FPGA (Xilinx Spartan 3 1000K gates): 1. Data from the external frame buffer (FB) memory goes to the Bayer-to-YCbCr (4:2:0) converter in overlapping 20x20 tiles that produce 6 8x8 blocks (one macroblock) on the

Good day! I'm creating HDL IP CORE (for using in FPGA) for theora encoder (now only I-frames). I don't undestand one moment. Now i develop such stages: 1. From RBG(byer) to YCbCr converter 2. DCT processing (8x8 pixels blocks) 3. Quantizator of DCT coeff. 4. Zig-Zag of quantized DCT coeff. and now i have uresolved last stage of compression - how i must send 8x8 blocks to huffman

Hello, I want to let you know about an algo that will soon be published and that may be of interest to Vorbis (and other Ogg projects) : http://f-cpu.seul.org/whygee/ddj-3r/ddj-3r.tgz this is the archive of the article i submitted. It describes the "Recursive Range Reduction" algorithm (3R for short) and uses only a few basic computer principles (a binary tree being the most complex

Andrey posted the following update at his sourceforge web site. I'm sharing it here because I think it is fascinating to see the progress in his FPGA implemention of the Theora codec as it happens. John <snip> Wrote code and partially simulated compressor_two module with submodules. It gets fixed-width (12-bits) "pre-tokens" from the frame buffer in the coded order

On Monday 25 April 2005 14:43, Vladimir Prus wrote: > The 'i' variable is never modified in the program, however, all analyses > except for -globalsmodref-aa report that the > > %tmp.3 = call int %_Z3bari( int %p ) ; <int> [#uses=1] > > instruction can modify 'i'. I'm somewhat surprised, because it looks like > -globalsmodref-aa is the simplest

> I need a simple blog with categories and comments and an archive. I want a > nice posting system, but don''t want it in HTML. Is there something I can add > or make, kind of like BBCODE? http://whytheluckystiff.net/ruby/redcloth/ http://wiki.rubyonrails.org/rails/pages/RedCloth > I pretty much know what else I have to do, but there is one more thing. A > client section.

---------- Forwarded message ---------- From: digital design <developer.fpga at gmail.com> Date: 21 March 2011 13:38 Subject: Re: [theora] alghorithm of working encoder in libtheora To: bens at alum.mit.edu Cc: Reply-All at xiph.org On 18 March 2011 23:15, Benjamin M. Schwartz <bmschwar at fas.harvard.edu>wrote: > On 03/18/2011 01:44 PM, digital design wrote: > > Now i

Hi, I am very new to Theora, having just started working through the code a few weeks ago. I am working on a requantization tool to reduce bit rates, hopefully on the fly, for some video conferencing work. As I was working through the encoding phase I noticed this line in encode.c: for(ti=_enc->dct_token_offs[pli][zzi];ti<ndct_tokens;ti++){ It's around line 804, but I am

Hi, I need to generate complex graphics which have to be shown in the plot window but also in pdf file, and they must have A4 size. This is the reason why I use width=8.27 and heigth=11.69. The problem is that I don't make it runs when I put something (text, lines, and so on) outside the plot region. I mean if I run the following code, it works perfectly, because the text "My

Hello I would like to transfer some Splus functions in R. But I have a problem first about this assignation in Splus : xnom <- deparse(substitute(x)) I am a bad programmer : I don't understand the R help How to modify these functions ? Thank you very much for your help Here are the four functions and a data test

I was trying to read in a file and delete lines that did not have the correct number of fields on them. I was reading the file as one character vector per line using 'scan' with sep='\n'. I was then using 'count.fields' with 'textConnection' to the object I just read in. I thought at first the system was locked up, but further testing showed that the

Hello, I have a problem running wine, which is basically this: 1. I run some program under wine, and it runs OK. 2. I run export A=1 3. I run wine again, and it reports: wine: Unhandled exception (thread 0009), starting debugger... err:seh:start_debugger Couldn't start debugger ("debugger/winedbg 8 32") (2) The name of variable does not matter at all. If I "unset

Hello, I can`t figure out how can increase the velocity of the fitting data by nls. I have a long data .csv I want to read evry time the first colunm to the other colunm and analisy with thata tools setwd("C:/dati") a<-read.table("Normalizzazione.csv", sep=",", dec=".", header=F) for (i in 1:dim(a[[2]]]) { #preparazione dati da analizzare

Hi All, Another nls related problem (for background, I'm migrating a complicated modelling package from S-plus to R). Below I've reduced this to the minimum necessary to demonstrate my problem (I think); the real situation is more complicated. Two similar selfStart functions, ssA and ssB. The 'initial' function for ssB modifies its arguments a little and then calls getInital

Hello, I was trying to build some functions which I would like to integrate over an interval using the function 'integrate' from the 'stats' package. As an example, please consider the function h(u)=sin(pi*u) + sqrt(2)*sin(pi*2*u) + sqrt(3)*sin(pi*3*u) + 2*sin(pi*4*u) Two alternative ways to 'build' this function are as in f and g below: coeff<-sqrt(1:4)

Hi all, Does Theora Community have an interest in a multi-thread decoder implementation? I'm starting to work with multi-thread and I thought that Theora Decoder is a good choice for me, because I had been working with it in a FPGA implementation and I have experience with the library. I'm thinking in working with LoopFilter at first. Do you think I could start with it or there is a

Hello, from Verzani, simpleR (pdf), p. 80, I created the following function to test the coefficient of lm() against an arbitrary value. coeff.test <- function(lm.result, var, coeffname, value) { # null hypothesis: coeff = value # alternative hypothesis: coeff != value es <- resid(lm.result) coeff <- (coefficients(lm.result))[[coeffname]] # degrees of freedom = length(var) -

I am interested in testing two similar nls models to determine if the lines are statistically different when fitted with two different data sets; one corn, another soybean. I know I can do this in linear models by testing for interactions. See Introductory Statistics with R by Dallgaard p212-218 for an example. I have two different data sets I am comparing to lai. ci.re should have very

Hello people My name is Felipe and I sent a proposal to the Google Summer of Code that the goal is to get a FPGA embeded system decoding Theora Streams in real-time. It was accepted and the mentor is the Ralph Giles. The proposal can be viewd here: http://atlas.lsc.ic.unicamp.br/~portavales/wp-content/uploads/2006/05/soc_proposal.txt There is also a presentation with a better division of the