similar to: [nut] Pace eprotocol (#4)

On Aug 21, 2015, at 10:10 AM, Mario Lobo <mlobo at digiart.art.br> wrote: > >> Not sure what to look for yet. It might be easier to add in the debug >> calls to the source code-- can you try building NUT from source? If >> you installed via the ports tree (as opposed to binary packages), you >> should have most of the dependencies installed. You might also need

On Jan 21, 2015, at 3:41 AM, Maurizio Iacaruso <maurizio.iacaruso at gmail.com> wrote: > The ?device? is this http://www.dlink.com/it/it/business-solutions/network-storage/network-video-recorders/dnr-322l-cloud-network-video-recorder , a NVR with USB port for monitoring UPS. It doesn?t support monitoring by LAN. > So, my aim is to ?replicate? the state of the UPS, in the sense that

So, the hardware way seems too difficult. I see the raspberry documentation in order to understand if it?s possible ?replicate? an USB signal to GPIO. So, with a TTL-USB cable I send the signal to the NVR. I hope this is possible! Da: Charles Lepple [mailto:clepple at gmail.com] Inviato: mercoled? 21 gennaio 2015 13:41 A: Maurizio Iacaruso Cc: NUT List Oggetto: Re: [Nut-upsuser]

Success !! at least in the compile and build of the Cygwin *.exe's git clone git://github.com/networkupstools/nut.git ./autogen.sh cd nut ./autogen.sh ./configure --with-all=auto --with-doc=auto make install problem was in : /* genericups.c - support for generic contact-closure UPS models Copyright (C) 1999 Russell Kroll <rkroll at exploits.org> This program is free

On Oct 24, 2015, at 12:11 PM, Walter Literowich <wliterow at gmail.com> wrote: > > Making all in drivers > make[1]: Entering directory '/cygdrive/c/nut/drivers' > gcc -g -O2 -Wall -Wsign-compare usbhid-ups.c -o usbhid-ups > In file included from usbhid-ups.c:32:0: > main.h:4:20: fatal error: common.h: No such file or directory > #include

Hello, looking at the pty handling in OpenSSH 2.3.0p1 (hasn't changed much in CVS, as far as I can tell after a quick look at it), I can see that if the system provides both /dev/ptmx and openpty() types of pty interface, the latter is preferred. This is the case on Linux with glibc 2.1.3 and most likely later versions too. However, openpty() is documented to be dangerous - quote from the

On Sun, 23 Aug 2015 11:09:03 -0400 Charles Lepple <clepple at gmail.com> wrote: > On Aug 21, 2015, at 10:10 AM, Mario Lobo <mlobo at digiart.art.br> wrote: > > > >> Not sure what to look for yet. It might be easier to add in the > >> debug calls to the source code-- can you try building NUT from > >> source? If you installed via the ports tree (as

We are trying to create RHEL6.1 container and having trouble getting a proper console to the container. I have used lxc containers in the past and lxc has a script (lxc-fedora) to setup a basic Fedora container. Is there something similar or docs with virtmgr ? We started out making a copy of the root fs and using that copy as the root for the container. I made a couple of tweaks to the

while finishing some work on the HAL integration (I'm now mapping DBus method with NUT commands, to allow at least the final UPS poweroff), I was horrified to realize (and so late) the changes in usbhid-ups->upsdrv_shutdown(). We've lost a lot there, but making a generic code, instead of keeping the subdrivers delegation. For example, the shutdown.return command (which is or should be

Hi all, Arjen can you enlighten me about the function of the blazer upsdrv_shutdown function. I think they are in the wrong order. Regards Kjell

Hi Peter Now I can get subdrivers to have ups.conf/command-line options, I've started looking at making the newhidups belkin-hid subdriver have the wait and wait-on-shutdown behaviour in the same was as belkinunv, and having just gone back and gone "yuck!" at my huge comments in my revised belkinunv source, I decided to clear out all the extraneous commentary in my

Yo Andrew! What version of Openssh are you trying? RGDS GARY On Mon, 12 Jun 2000, Andrew McGill wrote: > Date: Mon, 12 Jun 2000 15:26:53 +0200 > From: Andrew McGill <andrewm at datrix.co.za> > To: djm at ibs.com.au > Cc: gem at rellim.com > Subject: Openssh on SCO Openserver Release 5 > > Hi there > > Your e-mail address appears in the README for openssh,

Hi list At job we have an old C program which works with industrial hand terminals from Honeywell. That terminal has its own ssh/telnet client to connect to a linux redhat 6.6 server (openssh-server-5.3p1-104.el6_6.1.x86_64). Once it is connected to the linux box (using a certain user), a C program is launched by the bash shell with the following parameters export TERM=vt200 stty raw icrnl

Hello, I am using the tftp-hpa 0.48 as delivered in Linux Fedora Core 9 as a client to send a file to another server on an unreliable network. The transaction is sometimes timing out. I have monitored the the TFTP packets to see what is missing. It seems a DATA packet is being lost. The server is repeating the ACKs for the previous packet every three seconds. I think these repeated ACKs are

[forwarded without attachments, for real this time] > Begin forwarded message: > > From: Gabriele TAORMINA <gabriele.taormina at legrand.com <mailto:gabriele.taormina at legrand.com>> > Subject: Re: [Nut-upsdev] Adding drivers to NUT? > Date: August 27, 2018 at 6:03:55 AM EDT > To: Daniele Pezzini <hyouko at gmail.com <mailto:hyouko at gmail.com>> >

I've got a Powerware 5119 RM UPS. driver.list says to use "genericups upstype=20", however I know this UPS supports the UPS Code II protocol, so I wanted to use the upscode2 driver. It took some hacking but finally it works. I'm using NUT 2.4.1 and upscode2 driver version 0.87 (however the latest r2350 version of upscode2.c isn't significantly different, so I think all

Dear All, I am new to FLAC. I have to port FLAC on sh4 architecture. Can somebody please let me know which architectures FLAC supports today? Also if somebody has an idea about the functionality of the code written in assembly, it would be of great help. Thanks and Regards Divyahaas Bhatia Senior Technical Leader Pace Micro Technology (India) Private Limited Bringing Technology

Hello R Developers I am using DNACopy package http://bioconductor.org/packages/1.9/bioc/html/DNAcopy.html I am not able to figure out how to (if at all possible) to modify output format, namely, I am getting the following: "ID" "chrom" "loc.start" "loc.end" "num.mark" "seg.mean" Is it a way to get also median and standard deviation?

Hi, I started updating smart driver with a few things I've been missing. While going through the source: - in upsdrv_shutdown(), there're loads of printfs - they kinda look like a leftover from older debug times. Shouldn't they be changed into upsdebugx() or upslogx() ?

Credit goes to "cppcheck". Signed-off-by: Thomas Jarosch <thomas.jarosch at intra2net.com> --- drivers/mge-utalk.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-) diff --git a/drivers/mge-utalk.c b/drivers/mge-utalk.c index c6114c7..616e2ad 100644 --- a/drivers/mge-utalk.c +++ b/drivers/mge-utalk.c @@ -465,7 +465,8 @@ void upsdrv_shutdown(void) { char