similar to: Monitoring through SNMP

Hello We have Dell servers and need to monitor them through SNMP. but need to install or insert Dell MIBs to our Centos. is copying MIBs are enough ? has any one is using Dell OpenManage on Centos ? Thanks

Hello, I'm trying to monitor asterisk with snmp. I'm using asterisk 1.4.4 compiled with res_snmp on a debian stable: *CLI> module show like snmp Module Description Use Count res_snmp.so SNMP [Sub]Agent for Asterisk 0 I've configured asterisk in res_snmp.conf: [general] subagent = yes enabled = yes and when asterisk start print

2014-02-26 1:45 GMT+01:00 Jason R Begley <jayray at digitalgoat.com>: > Sorry, I just now figured out how to get a usable output. > -Option one doesn't work at all for me. > > snmp_build: unknown failuresnmpget: Error building ASN.1 representation > (Can't build OID for variable) > COUNT = 0 / 0 > Creating /usr/share/snmp/mibs/ups-mib.txt-mib.h > Creating

Sorry, I just now figured out how to get a usable output. -Option one doesn't work at all for me. snmp_build: unknown failuresnmpget: Error building ASN.1 representation (Can't build OID for variable) COUNT = 0 / 0 Creating /usr/share/snmp/mibs/ups-mib.txt-mib.h Creating /usr/share/snmp/mibs/ups-mib.txt-mib.c Done. -Option 2 is attached. I ran the following to get the output. snmpwalk

Hi I''ve patched net-mrtg http://www.net-snmp.org/ with http://x-ray.prokon.cz/data/snmp/ sucefully Also I''ve copied QOS.TXT to /usr/local/share/snmp/mibs when I make a normal use of snmp, with mrtg in order to monitor all traffic on eth0 and eth1, it works OK. But, how must I do in order to get monitor for a specific class ? If I make a snmpwalk (like README suggest), I get

Thanks, now I started getting messages from the list. As you advised, I renamed the mib file NETCARD.mib to Tripplite and ran command ./gen-snmp-subdriver.sh -H 10.200.254.39 -c public -n Tripplite Here is what it says: snmp_build: unknown failuresnmpget: Error building ASN.1 representation (Can't build OID for variable) COUNT = 0 / 0 Creating tripplite-mib.h Creating tripplite-mib.c Done.

[Please keep the list CC'd. Thanks!] On Feb 13, 2014, at 4:55 AM, ??? ????? wrote: > Can you try adding "-v 1" to the snmpwalk command? If that works, we can add it to gen-snmp-subdriver.sh. > > Yes, I tried it before, ran command "snmpwalk -v 1 -On -c public 10.200.254.39 .1.3.6.1.4.1.935" > > Output: > .1.3.6.1.4.1.935 = NULL > Error: OID not

On Jan 27, 2019, at 2:36 PM, Phil Stracchino <phils at caerllewys.net> wrote: > > SO, my full load on my core UPS is two Dell R610s, one Sun X4540, one HP > DL360p gen8, two six-core Thuban-II workstations plua their monitors, > and the network stack and KVM. > > The APC SU3000RM (3KVA) that blew up last week considered this to be > just short of 60% load. > The new

OpenBSD 5.6 nut-2.7.2 (bin package) Liebert IntelliSlot Unity Card IS-UNITY-DP ups.conf: ...... ? mibs = ietf ? snmp_version = v1 ...... The problem is that the card responds to other snmp (v1,2c,3) requests normally but not to the 1.3.6.1.2.1.33.1.1.1.0 (UPS-MIB.upsIdentManufacturer). # snmp-ups -a laes2ups -DDDDDDD Network UPS Tools - Generic SNMP UPS driver 0.72 (2.7.2) ?? 0.000000???? debug

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I figured out why nut seemed to segfault at startup from my Solaris boxes (and snmp-ups too) - I believe that nut is trying to use some MIBs that do not exist on my particular PW9170, for whatever reason. It dies on my Linux box too, complaining like this: pkdick:~/nut/bin# ./snmp-ups -x mibs=pw -x community=publicstring upsname Network UPS Tools -

On 2/24/2014 11:10 PM, Charles Lepple wrote: > On Feb 24, 2014, at 10:29 PM, Jason R Begley wrote: > >> Thanks for the quick response Charles! I may not have gotten the correct output from the snmpwalk, let me know if the attachment is usable. Thanks! > Sorry, it's basically all comments. Do you have the stdout from the subdriver script? Also, how is the MIB file installed?

> Does it have the same behavior if you start from .1.3.6.1.4.1.935*.1* or . > 1.3.6.1.4.1.935.1.1? If not, no worries - see below. > > Yes, says "Timeout: No Response from 10.200.254.39", Ok. > ..... > > >> The important part of "mode 2" is to have the output of snmpwalk. It is >> possible to query each OID, and manually build the *-mib.c

Hello, I have two UPS from PowerWalker: VFI 1500RM LCD and VFI 3000RM LCD both equiped with SNMP card, but NUT with snmp-ups does not support them. PowerWalker declare support RFC1213, RFC162 but there is a problem with some snmp values: # upsdrvctl start Network UPS Tools - UPS driver controller 2.6.4 Network UPS Tools - Generic SNMP UPS driver 0.66 (2.6.4) Detected 3K on host 10.0.0.236

Hello I'm trying to setup SNMP on my Centos 4.2 server. I want the ability to monitor the disk and some other non default settings that can be defined in snmpd.conf but when I request the data, it doesn't give the disired results. Config below and trap results below. Thanks in advance for any help. Kevin [root at localhost snmp] snmpget -v 2c -c public localhost disk

Hi, We are using Zenoss to monitor a number of paravirt Linux hosts (using the xen net device), it appears that an snmp query to the paravirt hosts is reporting the interface speed as 10mbit - which is significantly lower than what it really is (the dom0 host has 1gbit networking). This causes the occasional spurious error from the monitoring tool as it notices that a host is using 75% of its

Hello, I'm wondering if anyone else is seeing the same issues I'm seeing here. I have recently upgraded one of my systems from 4.4 to 4.5 and ever since then I cannot get snmp to work. I am monitoring the interface traffic. Please keep in mind the firewall/router I do the same thing without any issues for 4 interfaces and it is still at 4.4 and doesn't have any issues. If I

Hi all, I hope someone can help me with this one. I'm trying to graph all traffic on the localhost's network card with Cacti. >From what I understand I should use SNMP to query the traffic, but I can't seem to get SNMP info for the network interface. I have installed all the necessary snmp tools, "yum install snmpd net-snmp net-snmp-utils net-snmp-devel net-snmpt-libs "

Hi all, I think the problem is related with the latest nut update (now I'm using version 2.4.3) # snmpwalk -Os -c public -v 1 192.168.20.60 [...] mib-2.33.1.1.1.0 = "" mib-2.33.1.1.2.0 = "" mib-2.33.1.1.3.0 = "" mib-2.33.1.1.4.0 = STRING: "2.39.DK520" mib-2.33.1.1.5.0 = "" mib-2.33.1.2.1.0 = INTEGER: 2 mib-2.33.1.2.2.0 = INTEGER: 0

Hi NUT-Users, we work with a GE LP 33 UPS and an Advanced SNMP WEB Interface Card. This card supports the RFC1628 Definition. So I think this combination work together with NUT and the snmp-driver, correct? I installed the networkupstools on my Debian Sarge with apt-get (nut & nut-snmp). After configuration I start the upsd and upsmon. I get following output in /var/log/syslog: ... Aug 3

Hi All, I am a new member of this list. I want to know about a way to monitor the traffic shaping setup to confirm whether it is working as expected. I went through the archives of this list and found some pointers related to tc-snmp extension/patch for net-snmp and some perl scripts on www.docum.org. I want to know whether this type of a setup work. Or else is there any other way ? Actually I am