similar to: Difficulties in trying to do a mixed effects model using the lmer function

Dear openssh developers, has the problem related to remote unix socket forwarding to a local port ever been fixed? (see message below: ssh -L 12345:/tmp/sock) I could not find any code containing the patch (maybe i am looking in the wrong places) I actually had the same problem and the feature is really handy if you are working on a windows machine. Help is apreciated. Thanks! Best

Hi I''m setting up shaping using HTB and hashkey. It seems like there is a limit on the number of classid''s at 10000? How can I go higher than 10000? This is what my output say when I reach classid number 10000: ... ... /sbin/tc class add dev eth0 parent 2:6 classid 2:9998 htb prio 5 rate 768kbit ceil 768kbit burst 0 cburst 0 /sbin/tc qdisc add dev eth0 parent 2:9998 handle

Hello! I have trouble with multipath routing. Those options are enabled in kernel: [*] IP: policy routing [*] IP: equal cost multipath [*] IP: equal cost multipath with caching support (EXPERIMENTAL) <*> MULTIPATH: round robin algorithm But issuing: ip r a 1.2.3.0/23 scope global equalize nexthop via 80.245.176.11 \ dev eth0 weight 1 nexthop via 80.245.176.13 dev eth0

Hello! I am using since yesterday ESFQ instead of N HTB queues. It mostly works OK, but when somebody is using one single sesion (for example downloading file via FTP), it gets weird speed. For example it is 20 kilobytes pres second, then drops down to 9, then 20 again, and then slowly to 0 and stops. But when using download accelererator of some kind or bittorrent client which uses many

Hello! I was always using "default" in HTB to choose default class, but now I need to do it with filters. Tried following command: # tc filter add dev eth0 protocol ip parent 10: prio 2 flowid 10:2 Unknown filter "flowid", hence option "10:2" is unparsable It is from example in LARTC Howto. My question is then - how to make a filter matching all without eating

Hi! Maybe you can help me, would be very nice! I'm new to the list and I'm very glad that it exists... A week ago we migrated to samba and since then it's taking very long to save a 1,8MB excel document. On fast ethernet it takes us about 10 seconds, on wireless lan it can take up to a minute, although transferring the same amount of data from the very same machine, that is

Refering to pppoe i have next problem : I asked my isp if i can buy a class of real ip`s to be routed by them. They said elegantly it can`t be done . I want opinions . I am using an ADSL connection through a Speedtouch 510 configured in bridge. About Bgp : i asked someone if i can peer 2 different locations on 2 different ip`s using private asn number and he said yes , and what i don`t

On a boot drive on a PC, I would like to boot Linux by having it at the beginning of the disk, right after the MBR and SYSLINUX, _before_ the first partition, and _not_ in a filesystem. Essentially I want something like booting a floppy with a kernel built using "make fdimage", but with a hard disk instead of a floppy disk. The first partition would probably start at the second

Hi, I have a Samba 3.0 beta server set up as an NT Domain PDC (lets call it box S), a Windows 2000 client (box W) and a Linux member server in the domain (box L). All are configured as per the most recent 3.0/HEAD howto. S and L have the same users with same UIDs and login names in /etc/passwd and /etc/shadow. When browsing the domain from W, I can access all the shares on S and L. On S I can

Hi I have read various info, and mailing list archives, but have not found an answer to the following. I have a few servers with configurations similar to the following: They each have multiple uplinks to the Internet, and a sample config is as follows: eth1 is 192.168.0.1, connected to 192.168.0.2 eth2 is 192.168.1.1, connected to 192.168.1.2 My default route looks like: ip route add scope

Apache conf: FastCgiServer /var/www/gissmoh.de/public/dispatch.fcgi -initial-env RAILS_ENV=prod uction -processes 5 -idle-timeout 60 <virtualhost 212.87.142.234:80> ServerName www.gissmoh.de DocumentRoot /var/www/gissmoh.de/public CustomLog /var/log/apache2/gissmoh.de/access.log combined SetEnv RAILS_ENV production

Hello, I have some Problems with getting WINE to print. I'm using wine on a non-Windows machine with Debian Potato. Everything works fine except printing. When I try to print something I always get something like "Printer not setup properly". The errormessage from wine is err:psdrv:PSDRV_AFMGetCharMetrics No whitespace found. My .wine/config -file looks like this: [parallelports]

hello, i still trying to deal with groups in a samba-pdc i am now closer to my problem: the net groupmap cant find the group about a wrong groupid. i found similar errormessages by googling, but no answer, which brings me to understand what exactly happens. it follows a snipp from smb.conf, a snipp from the debug-info i am getting. my ldap has ous people, groups and Idmap samba is 3.0.4 system

hello, trying to set up an pdc with 3.0.4 on solaris with openldap creating groups and adding groupmaps does not work. net group add asks the password for the ldap-manager, comes back without any message, but the group does not exist after that. if i try to make a groupmap without adding a wingroup first, the result is the following (no question for the password!) /usr/local/samba/bin/net

Hi everyone, Is it possible to use tapply(x,y,mean) if not all groups of x by y are of the same length (for example if you have one missing observation)? I tried tapply(x,y,mean,na.omit=T) but it doesn't work! Steffi -- --------------------------------- Stefanie von Felten Doktorandin ETH Z?rich Institut f?r Pflanzenwissenschaften ETH Zentrum, LFW A 2 Telefon: 044 632 85 97 Telefax: 044

Hi there, I want to create plots with some kind of 'complex' axis labelling of the form $\dot{V}$ and integrate those plots into a LaTeX document. What is the best way to go? I've figured out, that the 'plotmath' commands are somewhat limited (at least I wasn't able to get the $\dot{V}$ generated) and that plots with 'plotmath'-axes wouldn't export

Dear all, I hope this is the right mailing list for my question -- I felt that this was too technical for R-help. I am trying to compile R-2.4.0 on a HP-UX system: ./configure MAKE=gmake --prefix=$HOME --without-x --without-tcltk --disable-R-profiling --without-readline --disable-multibyte R is now configured for ia64-hp-hpux11.23 Source directory: . Installation directory:

Full_Name: Markus Liedgens Version: Ever since 1.6 OS: Windows 98 / Windows Xp Submission from: (NULL) (81.63.111.226) To control the progress of a function one can consider to use print() to issue a message in the command window. However, using Win98 / R 1.9 or WinXP / R 2.0, this approach is of little usefulness, since all the print() commands are issued at once, just before the control

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 hello, i see a strange behavior on my samba 3.0.11 on solaris 8 when i install printer-drivers fir win-clients. 1. i ask the win-server for the drivers and get a huge list of depend files: # /usr/local/samba/bin/rpcclient -c 'getdriver "SLA D91 Xerox 4500" 3' - -U xxx xxx [Windows NT x86] Printer Driver Info 3:

Dear all: Is it possible to set Samba share (and the files under the share) from = Samba using setfacl? I want to set up a common directory for certain = group of people to read, write and execute it (user::rwx group::rwx). I = assigned user1 as the owner of all the files under this common directory = and here is the thing: when user2(or any other users in the same group) accessed any of the =