similar to: accept email and make phone call?

Getting "no service" display on aastra 480i. Sip debug shows an "unathorized" blub when the aastra tries to register. Some reading indicates that 1.4 firmware wants aastra.cfg and mac.cfg in /tftpboot/. There are none. Anyone have basic config files? Or can point me to a good link? All links I have tried, that purport to have config files, are either dead or error out.

Since the beginning (of my Asterisk life) I have an install that is, supposedly, set up for call waiting. Using a TDM400p, with FXO and FXS modules. On the Analog phones, I can hear the Incoming call (call waiting) tone, but the system does not respond to a "hook flash", to place the current call on hold and answer the incoming call. I have not attempted, nor research how/if this can

This is a follow up to an earlier post. Looking for a means to "individualize" incoming FAX, so as to distribute them to the intended recipient. While the PBX is based on Asterisk, it is not possible for me to "enter" the box to modify things, to any great degree. I thank those who mentioned IAXMODEM, earlier, but that seems a no go. Currently, there is a dedicated T1 into

I have an existing Hylafax system using a mainpine 4 port board, 4 POTS lines. Have a recently installed Asterisk system, with a dedicated T1 line. (Well, it's really a fonality system). What would I need to do, or where is the reading material, for what I need to do, to convert the Hylafax server to use the T1 line? Reliably. Preferably to use DID's as well. The current FAX works

My Polycom phones are displaying time, off by one hour. Seems they are on the old DST rules. How do I fix this? joe a.

I am having a problem detecting incoming FAX. TMD22p (tdm400p 2 fxo, 2fxs) As I understand it, I must have faxdetect = incoming to enable detection of the fax tone. Then, I must have a [fax] context to pickup the line and send it to whatever extension the FAX device is on. In my case, I ask it to answer immediately and do a distinctive ring (r3) to alert that is its a FAX call so no one picks

Having had various issues with local vendor (begins with "V"). am looking to move to all wireless. Anyone know if current vendor can refuse to port the current land line numbers to a wireless provider? >From what I've read, the Fed's seem to say "no", they cannot refuse, or impede this. joe a.

Excuse me if I recently posted on this, but I cannot find it, in my, or the list archives. Is it possible, when transferring a call, to set the user ID to that of the "outgoing number" instead of the incoming number? I believe the answer is (was) yes. New twist, does it matter what the destination "media" is? Meaning, the call would be coming in on a T1, going out on a T1,

While pondering several issues, poor quality PSTN POTS lines, potential cost savings with multiple cell numbers, the FAX problems over TDM400p, etc, I wondered about: Cell phone "Base stations" to replace POTS lines. Devices to "cradle" cell phones and connect to TDM400p, for instance, to mimic PSTN. Are there such beasts, how do they play with asterisk? Will FAX work over

Any great disadvantage to using polycom 300/500/600 vs the 301/501/601? joe a.

Is there more than one version of the Cisco 7960? I see some items advertised as 7960 or 7960G, but searching on 7960 only brings up 7960G info, or ambiguous stuff. joe a.

http://www.wired.com/print/politics/security/news/2007/08/wiretap

I upgraded from a perfectly working 1.6.2 asterisk installation (including fax via app_fax_digium) to 1.8.0 this evening. All my custom modules (including swift <thanks darren!>) are working fine except for fax. When a caller connects, asterisk switches to the fax context and hangs up the call. i've captured with: core set verbose 10 core set debug 10 fax set debug on sip

Experiencing one way audio using IAX2. I did see some other posts on this, and see there may be some internal issues with asterisk and one way audio. Can this be a widespread problem? So many seem to be using IAX, I find it puzzling. Some information points to this being a problem on asymmetrical connections. This is a decidedly asymmetrical connection, with 1.5 Mbs download and 256 kbs,

After upgrading to Asterisk 1.8.0, I am finding that my outbound SIP calls are being destroyed after 1 minute and 20 seconds (80 seconds). Asterisk is sending a BYE message - I have no idea why. http://jeremy.kister.net/tmp/20101115/sip.txt for a sip debug. can anyone suggest how i can further deal with this? -- Jeremy Kister http://jeremy.kister.net./

just thought this was cute enough to pass along, https://www.youtube.com/watch?feature=player_detailpage&v=GLwct15X_3g#t=135 -- Jeremy Kister http://jeremy.kister.net./

This is, hopefully, just a case of brain fade. With zapata.conf and zaptel.conf in place, asterisk loaded, no dial plan and all LEDS on the card lit, I get no dial tone, plugging an analog phone into ports 1 or 2, only a buzz and click. zaptel.conf - defaultzone=us loadzone=us fxoks=1,2 fxsks=3,4 zapata.conf [channels] signalling=fxo_ks language=us context=phones-1 group=0

I recently configured a SIP peer which i must specify my fromuser as my ten digit "DID". I send calls to this peer, but whenever Asterisk sends an options message, the fromuser is "asterisk". Is this a bug? Or is there some other config I must make ? register = 2155551941:123456 at 10.0.138.226/2155551941~600 [peer](!) type=peer context=inbound qualify=yes

I have a setup with a polycom 601 and an act p160s. All on local segment, no NAT. Can call the act p160s, from the polycom, rings, connects, and a conversation can take place. The reverse is not true, Dialing from the act to the polycom does not work. SIP debug shows, at the end, "Incoming call: got sip response 416 "unsupported URI Scheme" back from 192.168.0.xxx. Which is

Running Asterisk 1.6.2.11 on debian 5.0.6 with mpg123 1.4.3 when i start asterisk, i immediately see two mpg123 processes spawned which sit there forever. I can't imagine it's normal behavior, but if it is, please explain :) # /etc/init.d/asterisk stop stopping asterisk. #[...] # /etc/init.d/asterisk start starting asterisk. # psg aster root 14573 1 0 16:29 pts/2 00:00:00