similar to: 1.73 - Invalid or corrupt kernel image

To: Syslinux From: John Plunkett When Syslinux is used with floppy disks with a 1.44 MB format the boot proceeds at a good speed with no problems. When a format over 1.44 MB is used, the boot takes up to ten minutes. Is there a special setting for booting from floppy disks over 1.44 MB's? Is there documentation on how to configure with floppy disks with a format over 1.44 MB's? Thanks,

Hello, Been useing syslinux with the Floppy Firewall Distribution for some time now. While testing a new hardware configurations, no video card - serial port only as console, I no longer receive a nice looking messsage to the screen(serial port). When video card is present, but still making the serial port the console everything is ok(In fact syslinux sends the message to both the video card

Hi all. I have recently signed up with a adsl supplier. I ordered static ip''s I was given a block from 153-158. I am trying to make it so that each machine gets a live ip address that is accessable on the wan. I am using floppyfw as my router on a p200. I know that I could setup the the eth0 as multiple ip''s and do nat, but I am wondering if there is another way. I just want

Hi, I have performed all the steps from John Tepstra's "Samba-3 by Example" 20 April 2005 to Chapter 5, step 21, pg 146. (My goal is to have SAMBA with LDAP and no MS Windows servers.) Everything appears to work properly to this point. When I perform the command: (amd is the name of this test server) net rpc join -S AMD -U root%not24get I get the error: Could not connect to

i compile the $subj, and found the htb qdisc in it, what version is it?? the tc from redhat knows about htb??? C ------------------------------------------------------- Xnet scaneaza automat toate mesajele impotriva virusilor folosind RAV AntiVirus. Xnet automatically scans all messages for viruses using RAV AntiVirus. Nota: RAV AntiVirus poate sa nu detecteze toti virusii noi sau toate

When I run backup and send the output to a file on the server, I get a file limitation of 2g. When I do the same backup to a snap server, there is no problem. Is there a size limitation for a single file? Thanks, Steven C. Henry stevench@xnet.com

When booting with syslinux 3.07 I get this: Missing parameter in syslinux.cfg Missing parameter in syslinux.cfg Missing parameter in syslinux.cfg Unknown keyword in syslinux.cfg it still boots as expected, if the comments before the DEFAULT keyword is removed, the boot is clean. this behavior has changed since 2.11, which doesn't give these messages with the same syslinux.cfg syslinux.cfg:

I'm building a custom bootdisk that I would like to boot linux or boot memtest86 (www.memtest86.com). And I'm running into some difficulties with recent versions of syslinux. All I'm doing is making a new label in syslinux.cfg called memtest and giving it kernel memtest.bin. This has worked on and off for several recent versions of memtest. It worked in 1.67, broke in 1.70(loads

I have a dsl modem and two static IP addresses: 66.17.65.22 and 66.17.65.161. I am using the standard configuration from the Shorewall Setup Guide for multiple IP addresses and modifications suggested by the Aliased Interfaces Guide. I want to set up a shorewall 2.08 router for my home (Fedora Core 2 / kernel 2.6.8-1.521). I want share an internet connection with some pc''son a local

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I can not get this version of syslinux to recognise a valid kernel. I have 1.67 (but thought I would grab the latest) and 1.73 doesn't work. The hardware I am using is the Advantech PCI-6771 with a 64MB flash disk and the leaf bering distrution 1.0rc2 was the kernel image. I get an invalid or corrupt kernel message on boot. So I tried to just

Migrating a working Samba 2.2.8a Domain Controller to 3.0.2a Using smbpasswd file compiled using gcc 3.2.2 ---------------------------------------------------------------------------- -------- Used working 2.2.8 configuration ---------------------------------------------------------------------------- -------- #authentication as PDC workgroup = XNET domain logons = yes domain master = yes

I have a problem with R. I try to compute the confidence interval for my df. When I want to create the plot I have this problem: Error in xy.coords(x, y, xlabel, ylabel, log) : 'x' and 'y' lengths differ. I try this code: library(dplR) df.rwi <- detrend(rwl = df, method = "Spline",nyrs=NULL) write.table(df.rwi,file="rwi.txt",quote=FALSE,row.names=TRUE)

I am using /set.seed()/ before the /sample/ function. How does the length of the argument of /set.seed()/ and order of the digits affect how the sampling is carried out? Specifically, I have used set.seed(123456789). Will this configuration give me a genuinely random sampling?? Thank you in anticipation. Penny. [[alternative HTML version deleted]]

I have released SYSLINUX 1.73-pre1. This isn't a bug fix release (thank God), but given the rather painful quality of the last couple of releases I wanted to get another prerelease out as I'm working on the new core code. I'm trying to eliminate differences between the various syslinux components whereever possible; there has been some unnecessary differences in the past which

What is everyone using for a firewall? I'm currently using www.astaro.com but their recent releases have soured me on ASL as a practical solution on my hardware (1.2MHz Athlon, 30G, and 256M). I only have 4 computers going through the firewall wall but it's consistently at 50% cpu load. There is very little network traffic (<10k bits per second on the wan connection, < 40k

I have the folowing configuration: Client --- R1 --- R2 --- R3 --- Web the Client it''s me, the R1 router it''s myne (so i can control it), the R2 is my provider router, and R3 is the provider,provider router. R2 - R3 is a 2mbit link R1 - R2 is a 10mbit link R2 have multiple interfaces and other 10mbit links I have a 32kbit garanted bandwidth on the R2-R3, but without limit

Hello R-helpers I hope that my subject line is not detering anyone from helping me out:) I have been stuck of a few hours now, and I don't seem to pinpoint where the problem is. I have a data.frame which is structured as follow: str(hDatPretty) 'data.frame': 1665 obs. of ?8 variables: $ time ? ?: num ?0 1.02 2.05 3.07 4.09 ... $ hr ? ? ?: num ?62.4 63.6 64.6 65.5 66.2 ... $ emg ? ?

I posted this to the group last year, but the problem was not fixed so I will give it another try. I use 3Com's PXE server to deploy the Fedora Core boot disk to my clients for an ftp install. I also have ghost boot disks, bios update disks, and a video bios repair disk all using the 3Com PXE server. The problem is when I try to boot a Linux kernel. With all versions of syslinux since 1.72

Hello again! I've compliled new 2.6.16 Linux kernel with NFS root support (for availability to mount root directory ftom the boot server). But after pxelinux.cfg/default (it's configuration file) reading I get the error of: Invalid or corrupt kernel image boot: The content of my pxelinux.cfg/default is: LABEL linux KERNEL vmlinuz-2.6.16 APPEND root=nfsd I've even put initrd.img

I'm trying to boot nfs-root kernel using pxe. Kernel version is 2.6.28, image size - 2.3MB. tftp server works fine. The curious part: if I type the kernel image name at "boot:" prompt, exactly as it appears on the "Loading" line, everything works as expected. Does anybody have any ideas what it could be? By the way, gpxelinux exhibits the same behavior.