similar to: SNMP Log entries

I have set up samba to be a AD member and no other linux boxes. It worked well. I set up samba to be a PDS with no other linux boxes. It worked well. Now, I need to make a samba client that works with the samba PDS. I can join the domain. winbind can list users and such. getent doesnt work. I can see the authentication succeeding on the PDS but I cant access any shares. smbclient -L DOMAIN

I''m just-so-fresh to the list, so hello everyone. I''m having a realy hard time with setting up very simple bandwidth management. What I am trying to do is setup a 10Mbit interface to send at only 1920kbit to most of the network (to make sure it hardly ever tops 2mbit). I did succeed with the ingress traffic... With egress however, I get very odd results at different speeds. With

Hi there... I scanned the archives and did some Google'ing ... can find some references to these errors but didn't find a solution. This started when upgrading some servers from 5.5 to 5.6 release. It's net-snmp creating a lot of errors in the /var/log/messages suddenly. I do believe this is only happening on 64 bit installations but not 100% sure yet... [root at mail1

Hello Pros and users of Puppet. I have two problems with the following modul setup: My first problem that i tried every combination of require,notify,subscribe for the mail sending exec but it runs every single time when i run the module no matter if the files changed or not. Second problem that puppet reports that snmpd was refreshed by two resource and restarted but actually it doesnt happen.

Hi gents, I have a CentOS 6.6 install with net-snmp running. I'm using SNMPv3 Auth and Encryption with Observium polling devices every five minutes. On one of my Centos server, the net-snmp process will die after 24-36 hours of running. It seems to be hitting my system maximum file open limit which is set to 1024. > [root at mail net-snmp-5.7]# ulimit -n > 1024 That number will

Hi all, I keep getting the following error messages on all my systems that have Vlans configured on it's ethernet interfaces. May 27 02:50:50 spin-gw snmpd[5226]: error on subcontainer 'ia_addr' insert (-1) May 27 02:50:50 spin-gw snmpd[5226]: error on subcontainer 'ia_addr' insert (-1) May 27 02:50:50 spin-gw snmpd[5226]: error on subcontainer '' insert (-1)

I updated to CentOS 4.5 yesterday and now I am finding the snmpd daemon is logging reams and reams of these messages: May 20 10:40:03 mx01 snmpd[2572]: Connection from - 127.0.0.1 May 20 10:40:03 mx01 snmpd[2572]: transport socket = 12 Is there a way to turn off this useless logging? I am getting these every 5 minutes (every time MRTG updates my MailScanner statistics). So far what I tried

I have a bunch of centos 5.2 boxes. I'm trying to run smtp on all of them. Using indentical net-snmp configuration files. /etc/snmp/snmpd.conf com2sec notConfigUser localhost smssnmp com2sec notConfigUser 10.1.1.0/24 smssnmp group notConfigGroup v1 notConfigUser group notConfigGroup v2c notConfigUser view systemview included

Hi, I'm noticing some strangeness with chkconfig on CentOS 6.0 and was looking for a bit of advice. It appears that chkconfig is re sequencing or re ordering the start priority of various services when turning on a service using chkconfig. Example is the network service. Under normal circumstances network is set to start at S10. However when I add something like snmpd and invoke chkconfig

Hello, I'm trying to monitor asterisk with snmp. I'm using asterisk 1.4.4 compiled with res_snmp on a debian stable: *CLI> module show like snmp Module Description Use Count res_snmp.so SNMP [Sub]Agent for Asterisk 0 I've configured asterisk in res_snmp.conf: [general] subagent = yes enabled = yes and when asterisk start print

First off, new to puppet here, but so far it''s been exceptionally easy to install and get running. I''ve got it on a handful of solaris 10/x86 zones, and it''s working well. I had one gotcha that I ran into, which turned out to be a combination of a sun bug and and just some slight weirdness. I was trying to get the stock solaris snmpd service running (net-snmp 5, by

I posted this to the -dev list and have recieved no reponse so I'm gonna try the -users list. I'm trying to bring ast-ax-snmp up to date with current CVS. It's a small patch against chan_zap and pbx, but also has a loadable module component. That module is compiled against some NET-SNMPD headers/libraries. But net-snmpd also has module support and they have a function called

Hi, We have a server which locks up about once a week (for the past 3 weeks now), without any warning, and the only way to recover it, is to reset the server. This causes unwanted downtime, and often software loss as well. How do I debug the server, which runs CentOS 5.2 to see why it locks up? The CPU is an Intel Q9300 Core 2 Quad, with 8 GB RAM, on an Intel Motherboard The last few entries

I just used Nick Mae's well written HOWTO on setting up Cacti on CentOS 4.xto setup Cacti on my CentOS 5.1 system : http://wiki.centos.org/HowTos/Cacti_on_CentOS_4.x I was hoping to add a page or section for CentOS 5.x with the modifications I'm including below. My wiki.centos.org username is "GeneWood" Changes : # Make sure snmpd accepts 'public' as public

Hi, I installed Book Collector as my first wine program. It seems to work just fine, BUT, I got these errors during the install and it said please report.; mike at serenity:~/Desktop$ wine bookcollectorsetup.exe preloader: Warning: failed to reserve range 00000000-60000000 preloader: Warning: failed to reserve range 00000000-60000000 err:dosmem:setup_dos_mem Cannot use first megabyte for DOS

Hi I have been using snmp for 'years' but never came accross this issue before. On starting i get this Apr 17 15:42:20 server snmpd: snmpd startup succeeded Apr 17 15:42:21 server snmpd[29630]: Error opening specified endpoint "udp:161" Apr 17 15:42:21 server snmpd[29630]: Server Exiting with code 1 i have googled this but cant find a solution - does anyone have any hints?

Dear All, Currently i am using CentOS 4.4 Linux I have configured crontab to run cron.daily at 4:02 am 2 4 * * * root run-parts /etc/cron.daily On 4:02 am my pc is shutdown and i am boot-up my pc on 13:11:10 Please verify the system log messages from "/var/log/messages" file Jul 30 13:11:10 localhost syslogd 1.4.1: restart (remote reception). Jul 30

Hello guys , I was trying to get a command output from my Centos 6 server using the snmpd "exec" section. The line added to snmpd.conf id: exec get_whitelist /bin/cat /home/snmp_user/whitelist.txt Afer trying to get the resut performing the snmpwalk client form another server I always got "permission denied" After reading some forums I founded that disabling selinux It

Hello All, Ive searched the arqchives, but didnt find anything like this.. Maybe im missing some trick here... The problem: I've instaled snmpd and snmp-utils packages with yum. Im using and old simple .conf file, i've been using on my fedora 1 box, but when I try to start snmpd, it just says OK, (Starting snmpd..........[OK]), but the service dont work at all. I dont see any process

Puppet 0.22.0 is complaining with "warning: Deprecation notice: Resource references should now be capitalized on line 22 in file /etc/ puppet/manifests/classes/snmp.pp". <snip> remotefile { "/etc/snmp/snmpd.conf": mode => 444, source => "system/snmp/snmpd.conf", notify => service[snmpd] # this is