similar to: Problem with starting nut

Markus Layr wrote: >Hi, > >thanks for the mustek driver for the nut packages. >It works nearly perfect for my Mustek PowerMust USV 2000VA. > >There is only a little problem concering the battery.charge, perhaps you >can help me to solve it. > >I always get 100.0 as value for the battery.charge, it never changes. > >Regards, >Markus Layr > >

Hello! I can't get my UPS to get detected. I have tried to search the internet for several hours. I have a Mustek Powermust 1400 USB that has both a USB and serial port. OS: openSUSE 20151209 (x86_64) VERSION = 20151209 CODENAME = Tumbleweed Kernel: 4.2.1-1-desktop Nut: nut-2.7.3-1.5.x86_64 installed with zypper dmesg |grep usb [94414.680765] usb 1-1.1: new low-speed USB device number 4

Hello, i try to setup NUT service to read/control my UPS but without success. Problem is when i try to start "/usr/local/ups/bin/upsdrvctl -DDDD -u root start" i got: /Network UPS Tools - UPS driver controller 2.6.2/ / 0.000000/ /If you're not a NUT core developer, chances are that you're told to enable debugging/ /to see why a driver

Arnaud Quette wrote: > Anyhow, I would more see this as a merge of all these drivers, with > some autodetection or flag/param to switch the mfr/model and maybe > capabilities... Whatever the driver name is, a good thing would be the > name of the protocol or something generic enough, though powermust is > fine. Ok, I made some minor changes to powermust, to make it less

On 2/27/07, Markus Layr <tuxian@yahoo.de> wrote: > do you now if there is a possibility to get an connection betwenn nut an > the Mustek PowerMust 2000VA via USB? > I tried if with newhidups but I always got "No matching HID UPS found". In the latest development version of NUT there's a new driver called "megatec_usb" that may support your UPS. If it

Dears, I have centos 5.5 with kernel 2.6.18 UPS: Mustek PowerMust 2000VA USB I trying to setup monitoring for this ups, I connect ups with server via COM port and USB. But here is the problem (with megatec_usb): [root at optimus ups]# /sbin/upsdrvctl start Network UPS Tools - UPS driver controller 2.2.0- Network UPS Tools 2.2.0- - Megatec protocol driver 1.5.4 [megatec_usb] Carlos

And sorry, I forgot to put log from messages, I always got this: Oct 30 21:06:25 optimus kernel: usb 5-1: usbfs: process 9808 (megatec_usb) did not claim interface 0 before use From: nut-tracker-bounces+vladimir=micovic.com at lists.alioth.debian.org [mailto:nut-tracker-bounces+vladimir=micovic.com at lists.alioth.debian.org] On Behalf Of Vladimir Micovic Sent: Saturday, October 30, 2010 8:00

Hello ! first off, thank you all for making this piece of software. from what i have seen so far this seems to be a really mature and advanced tool for all sorts of UPS models ! I`d like to tell that I own a UPS which isn`t listed on the compatibility list, but seems to be compatible. It is a PowerWalker - see this at

Hello ! first off, thank you all for making this piece of software. from what i have seen so far this seems to be a really mature and advanced tool for all sorts of UPS models ! I`d like to tell that I own a UPS which isn`t listed on the compatibility list, but seems to be compatible. It is a PowerWalker - see this at

Disclaimer: I've setup APC UPS monitoring and it works... ... but when it comes to mustek powermust 600usb (connected via com-port), I can't make it work. Got NUT installed via aptitude in ubuntu feisty and a basic setup, exactly the same as for the apc, except for the name of the ups and the corresponding section of ups.conf -- [mustek] driver = megatec port = /dev/ttyS1

Hi, a few days ago, I bought some of those Mustek UPSes that have both a serial and a USB connector. Currently only the serial port is supported by the megatec driver. This works fine so far. Now I have seen there is a megatec_usb driver, which currently only supports 2 other UPSes. How can I help to find out whether the PowerMust might actually work with the megatec_usb driver? -- Regards,

Hi all, I attached a driver for MiniBox openUPS device ( http://www.mini-box.com/OpenUPS) and a dump of the hid usages. I had the possibility to make a few adjustments to the device firmware for HID usages, and although I haven't managed to produce a good structure many issues from previous firmware were at least fixed and new information added. ATM the driver only shows pertaining

Hi folks, has anyone been successful in getting a Mustek PowerMust 500 to talk to nut? All my attempts (tried "mustek" and "powermust" as drivers) have been unsuccessful so far. Thanks for any clues. Sascha -- http://yoyodyne.ath.cx

Hi Peter, I've fwded your info to the list, as other people might be interested in. I've also logged a patch tracker so that you can follow its inclusion: https://alioth.debian.org/tracker/index.php?func=detail&aid=302882&group_id=30602&atid=411544 As a side note, there is a work underway to merge the similar driver (mustek, powermust, ...) into one named megatec. This one

On 10/30/2017 03:19 PM, Alexa Catalin wrote: > System: Cenots Linux 6.9 > Application: nut-2.7.5-0.20170613gitb1314c6? [with usb 0.1 from distro] > Device:??Mustek PowerMust 1060 LCD > Comunication log file: dump.txt > > We are looking at the possibility of successful communicating with > this device UPS?Mustek PowerMust 1060 LCD. > > PS: wolfy on the list gives me

Hello, first of all I'd like to thank all the NUT developers for their gorgeous work and for their efforts to make NUT the best and most complete UPS management software I've ever seen (seriously). Secondarily I'd like to help the NUT project as far as my help is needed, I'm not a programmer (by now...) but I would like to help somehow anyway. I have 3 UPS from the same

Hello, fisrt, you should subscribe to the NUT user mailing list to get a good support, since I've personaly no knowledges about such units: http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser Next, you should try the latest nut release (2.0.5 currently, but 2.2.0 soon) and most of all the new megatec driver. 2007/6/10, esva2 at inbox.lv <esva2 at inbox.lv>: > Dear

Hi all, I'm thinking buying a UPS Mustek PowerMust 600 USB to shutdown a Linux box on case of power failure. Can I use nut with this UPS without problems? I checked the page http://www.vamos-wentworth.org/upsinfo.html and was only something (incomplete) about Powermust 400 (information from November 2005). Could this be already changed? Thanks in advance.

Hi, Charles, On Wed, 2 May 2007 07:58:08 -0400, you wrote: > > Will that be enough to make it useable as a contribution? I believe > > the more sensible values for 36V UPS'es will be useful to other models > > than the one I have, too. > > Sounds good, but I don't think I saw it hit the list yet... I now have the following in megatec.c: static BatteryVolts

On Feb 11, 2008 5:30 PM, Marcio Gomes <mpg at microlink.com.br> wrote: > I change the if in [OFF] detect state to, in original way, if you send a > reset.watchdog, the UPS goes > to OFF state in clients, but it is not correct, because UPS is OL and > Shutdown are in progress, but > the power is not OFF First of all, thanks for the patch. But I have a few comments: Are you