similar to: IP range

I know this was discussed before, and I have seen a million ways of doing this via online docs. I have a quick question that hopefully the community can help me out with I am trying to add a block of 10 IP addresses. Rather then create 10 different alias files, I want to use the RANGE file. Docs say to use the following format: IPADDR_START=x.x.x.x IPADDR_END=x.x.x.x CLONENUM_START=0 If the

Hello. It happens that at the company I'm working decided to start migration of IPs tech. So they got a /48 block. I were trying to add it with: ifcfg-eth0-range1 (0 is already in use with IPv4 range): IPV6ADDR_START=xxxx IPV6ADDR_END=xxxx CLONENUM_START=0 But of course I am assuming that like in IPv4 IPADDR_START/END is implemented. Please give some guidance as I need this to done

On 1/10/2015 8:38 PM, Gordon Messmer wrote: > On 01/10/2015 08:10 PM, F. Mendez wrote: >> Hello. Yes I confirm...its a /48 (this guys are crazy here at my >> work...). > > It's not crazy, that's the standard deployment for a building. It's > almost certainly not possible to use all of the addresses in such a > space, but that's the point. IPv6 is

El 10/01/2015 a las 04:03 p.m., John R Pierce escribi?: > On 1/10/2015 12:56 PM, F. Mendez wrote: >> We need that same with IPv6 since we have a /48 and we need to have >> all IPv6s available for usage. > > Do you realize that a ipv6 /48 is a septillion IP addresses? thats > 1,208,925,819,614,629,200,000,000 individual IPs ? > > Or, its 65536 /64 subnets of

Folks The price point of Intel's NUC unit makes it attractive to use as a server that doesn't have significant computational load. In my environment, a USB connected hard-drive could provide all the storage needed. I wonder if anyone has had experience with it, and can answer: 1) Does Centos6 and/or Centos7 install from a USB connected optical drive? or a USB flash drive? I'd

I want to add two IP ranges on one NIC card (eth0 and eth0:1). Has anyone done this before? The CentOS 4 gui keeps locking up when I try it there and the command line ifconfig seems to work, but ifup always returns the error that is never heard (no such device) of eth0:1 thanks

Hi, I've built a function to generate plots and would like to be able pass in column names as a parameter. Here's a boiled down version of what I have right now: pmts <- data.frame(date=c(1,2,3), all=c(5,6,7),maj=c(4,5,6),ind=c(3,4,5)) perc.mktshare <- function(df){ range1 <- floor(min(with(df, 100*ind/all))) range2 <- ceiling(max(with(df, 100*ind/all)))

Hello, I just discovered that I cannot close the Excel application and task manager shows numerous copies of Excel.exe I tried both x$Quit() # shown in the rcom archive and x$Exit() and Excel refuses to die. Thank you very much. S. "You can't kill me, I will not die" Mojo Nixon I also have a problem with saving. It produces a pop-up dialog and does not take my second

Dear all, I tried running the following syntax but it keeps running for about 4 hours and then i got the following errors: Error in if (is.na(f0$objective)) { : argument is of length zero In addition: Warning message: In is.na(f0$objective) : is.na() applied to non-(list or vector) of type 'NULL' Here is the syntax itself: library('nloptr') library('pracma') #

Hi list, I just installed the rcom package and tried to read/give out some values from/to Excel. Altogether it works great... but nevertheless I don't know how the syntax works or in other words: "Which command needs which parameters?" Is there somwhere a manual about this package with good examples? I've read the Package description... but there are not really good

Hello Samba experts, Please read all email because i'm desperate!!!!! I have problem on joining to LAN-s using Samba. Finally i got a solution to "see" booth workgroups on "Entire Network", but i'm having problem with stations located in LAN2. From any station located in LAN1, I can see LAN2 workgroup and the browse list with stations located in LAN2, but when

Dear R forum I have a following vector of random no.s x = runif(100, 0.01, 0.99)  [1] 0.47212037 0.77867992 0.33947474 0.93369035   [5] 0.03720073 0.79307831 0.81801835 0.92710688 ................................................. I need to count the random no. falling in the range (0 - 0.10), (0.10 - 0.20), (0.20 - 0.30)..upto (0.90 - 1) Thus, I need to have a data frame as

I have a very small problem. Thanks for any suggestions. Say user1 logs onto a Windows XP workstation and opens file1. Then, if user2 attempts to open the file from another workstation the following message is displayed: "file1 is locked for editing by ''" Problem: *user1* is not displayed between the single quotes. However, say user1 logs onto a Win98 workstation and

Thanks a lot for your help so far. The main reason I do not use vms is that the server is pretty limited in RAM so this would only be my last resort. To prevent confusion: srv.wie (192.168.1.50) is the same machine as smb.wie (192.168.1.55), I seperated them just now to debug the problem. > These look like they are being run on the DC, what about from the > windows clients ? > I did

Greetings Xen user community, I am interested in using Mellanox ConnectX cards with SR-IOV capabilities to passthrough pci-e Virtual Functions (VFs) to Xen guests. The hope is to allow for the use of InfiniBand directly within virtual machines and thereby enable a plethora of high performance computing applications that already leverage InfiniBand interconnects. However, I have run into some

Hi, Thanks to John Wice for helping me with an earlier question. My two PCs behind the same router are still having problems connecting. Would appreciate thoughts on what I?m doing wrong? Router: Port 655 forwarded to 192.168.1.45, both TCP and UDP Port 656 forwarded to 192.168.1.51, both TCP and UDP Machine #1. ========== Local IP address on LAN = 192.168.1.45 Windows Firewall

Hello, Please forgive me if I'm repeating this post. I have searched and looked for similar problem with a solution but have not see a similar one. My outgoing SIP and other channels work fine but the incoming/inbound SIP call goes straight to Broadvoice voicemail. I see that Broadvoice is registered when I look at the SIP registry. I have turned on SIP Debug and it is below. Anyone know

> > This sounds like a dns problem, are your windows machines using the DC > as their nameserver ? > yes they are using the server as dns. DNS is done through bind9 and implemented in samba via bind9_dlz. All looks fine: $ host -t A smb.wie smb.wie has address 192.168.1.50 $ host -t SRV _kerberos._udp.smb.wie _kerberos._udp.smb.wie has SRV record 0 100 88 srv.smb.wie. $ host -t SRV

Hi, All Does Xapian support query string like "(age: 1..25) OR (age: 35..50)"? or "(age: 1..25) - (age: 35..50)"? I?want?to?get?the?results?with?age?range?from?1?to?25, 35?to?50. I?tested,?"(age: 1..25) OR (age: 35..50)"? or "(age: 1..25) - (age: 35..50)" doesn't work. Thanks Best wish-Rafael Gu

Hi - Thanks to Sven-Haegar and Donald, but still having issues setting up with Windows. Machine1 can't ping the VPN address of machine2. Regular IPv4 address for both machines in 192.168.1.xxx range. Router: Forwarding port 655 to 101.102.103.1, UDP and TCP Forwarding port 656 to 101.102.103.2, UDP and TCP Tinc.conf on machine user1 just three lines: Name = vpnuser1 ConnectTo =