similar to: Problem provisioning Cisco SPA303

Hi all, I've got a user with a couple of Cisco SPA303's. When I dial their phones with a dial string like: dial(sip/phone-a,300,rwkxttT) The phone rings, as expected. However after exactly 60 seconds, I get: [Aug 21 02:09:56] -- Got SIP response 480 "Temporarily not available" back from a.b.c.d:5062 [Aug 21 02:09:56] -- SIP/phone-a-00006a9d is circuit-busy [Aug 21

Hello, we have distributed lots of cisco spa303 IP phones and get them work with Asterisk. I have configured proxy and alternate proxy and enabled "dual registration" features in provisioning files(xml files). All phones are able to subscribe to both of servers. But the problem is, if main server goes down, i am obliged to wait nearly 20 second in order to place a call over second

Hi there, We have plans to install an office (not call center) with the following setup: 200 linksys 942 phones (sip + g711) on a LAN a server with a dual port E1 sangoma and a remora card with 4 fxo modules. So far when we want to setup a linksys phone, we need to use the http interface of each phone, disable/enable a lot of things and plug it into the network. this is not the best scenario for

True agree, problem is somehow the people purchased.... am supporting to overcome that. Trying level best... around 20 phones has been purchased.... ?? On Mon, 5 Dec 2016, 8:55 p.m. Victor Villarreal, <mefhigoseth at gmail.com> wrote: > With all the money you plan to invest in firmware, licenses, etc., you > have bought a Grandstream IP phone or Yealink... > -- >

Anyone have an example XML file for the PAP2T? Cheers, j

We have an issue with a customer where when calls are sent to one of their offices as soon as the call is answered the call fails. We are performing remote bridging and switching the audio from the server which initiated the call to our switch which is on the same network. After the call is answered we switch the audio which is accepted fine but we then send the following packet and get a SIP/488

Hi all, I have an SPA112 that in sitting behind a Ubee cable modem. The internet link is solid, but the device becomes unreachable within a day or so of being rebooted. Then the customer goes to reboot the device, they report that all 4 lights are lit. The ISP reports that the device does respond to ping, so it's not completely dead. I've had the same symptoms with SPA303's