similar to: RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 2108 [Liberator] (rev 05)

Dear list, I have inherited a CentOS-5 box with a LSI Sata Raid controller. It is configured as a RAID5 w/hot-standby. My concern is that I have no present means of determining the RAID status w/o downing the system and going into the bios to get status. If a disk has failed and brought the standby disk online, I would like to know about it, the day it happens by seeing it in syslog or getting

I've got a box running C7, just updated (yesterday). It had an onboard RAID controller, and an HBA. I just installed a new, additional RAID card, all LSI. MegaCli64 only sees one controller. I can't seem to find the magic to see the others. I *know* the new card is a MegaRAID - the box it came in says so. The system sees it 1:00.0 RAID bus controller: LSI Logic / Symbios Logic SAS1078

Scott Silverman wrote: > On Tue, Jul 10, 2018 at 12:37 PM, mark <m.roth at 5-cent.us> wrote: > >> I've got a box running C7, just updated (yesterday). It had an onboard >> RAID controller, and an HBA. I just installed a new, additional RAID >> card, all LSI. >> >> MegaCli64 only sees one controller. I can't seem to find the magic to >> see

On Thu, Jun 30, 2016 at 5:28 PM, Valeri Galtsev <galtsev at kicp.uchicago.edu> wrote: > > On Thu, June 30, 2016 2:59 pm, m.roth at 5-cent.us wrote: > > I've been googling, and haven't yet found the answer: does anyone here > > know if a MegaRAID SAS 2008 (falcon) (rev 03) can handle drives bigger > > than 2TB? > > > The following sources say, yes

On 08/18/2016 02:17 AM, Fawzy Ibrhim wrote: > I totally agree with John; NEC sold these servers with fakeraid from LSI as I used to login to LSI Firmware to manage the RAID disks. The NEC compatibility page at http://www.nec.com/en/global/prod/express/linux/centos.html indicates that the R120b2 is not certified for CentOS 7. CentOS 5 and 6, yes, but not 7. As there are other servers

John R Pierce wrote: > On 7/26/2016 10:20 AM, Fawzy Ibrhim wrote: >> I want to install Centos 7 latest build on NEC Server 5800/120b-2. >> >> The installation wizard fails to detect the storage connected to LSI >> SATA MegaRaid PCI. > > which megaraid card? they've made quite a lot. lspci will list the > card type... > > linux will only see storage

Hi, The server is running CentOS 5.8 Linux OS on Dell PowerEdge R710 having raid controller card 03:00.0 RAID bus controller: LSI Logic /Symbios Logic MegaRAID SAS 2108 [Liberator] (rev 05) /usr/sbin/smartctl -a /dev/sda smartctl version 5.38 [x86_64-redhat-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ Device: DELL PERC H700 Version: 2.10 DELL

I've been googling, and haven't yet found the answer: does anyone here know if a MegaRAID SAS 2008 (falcon) (rev 03) can handle drives bigger than 2TB? mark

-----Original Message-----From: John R Pierce <pierce at hogranch.com> Reply-to: CentOS mailing list <centos at centos.org> To: centos at centos.org Subject: Re: [CentOS] SCSI drives and Centos 7 Date: Sat, 29 Apr 2017 13:31:11 -0700 On 4/29/2017 12:42 PM, Gregory P. Ennis wrote: > what does `lspci` have to say about this raid card ? > > John, > > Thanks for the prompt

Did anyone manage to have xen (3.0.1 stable) run on this config? (this is on FC4 if it matters). I''ve tried recompiling the xen0 kernel with the Fusion options from my current kernel added, but it keeps removing some of them (maybe some that didn''t exist yet in kernel 2.6.12), and it seems I end up without the correct driver. If someone has this running, I''d be

Attached patch allows isolinux to boot from a CDROM attached to a NCR/Symbios/LSIlogic SCSI controller (bios version 4.19). It appears this bios can't read more than 1 sector at the time using the ah=42h int13 call. The isolinux boot was failing early on when 4 sector are read. (bios returned error 0 !) I'm not sure if the same 'getlinsec' routine is called upon later to load

hi i m trying to install centos5 on my poweredge 2950 with no luck. the raid controler is LSI Logic / Symbios Logic MegaRAID SAS 1078 (rev 04) indeed all is going fine during the installation but when i reboot the server panic the first error i got is this one error mounting /dev/root on /sysroot as ext3: block device required it seems that it can't find the /dev/root devices. but when

-----Original Message-----From: John R Pierce <pierce at hogranch.com> Reply-to: CentOS mailing list <centos at centos.org> To: centos at centos.org Subject: Re: [CentOS] SCSI drives and Centos 7 Date: Sat, 29 Apr 2017 11:19:38 -0700 On 4/29/2017 10:49 AM, Gregory P. Ennis wrote: > I am remote from the unit today, and do not have a good way to look at > the board today, but the

I would try the newer storcli utility instead of megacli. Thanks, Scott Silverman | IT | Simplex | 312-360-2444 230 S. LaSalle St., Suite 4-100, Chicago, IL 60604 On Tue, Jul 10, 2018 at 12:37 PM, mark <m.roth at 5-cent.us> wrote: > I've got a box running C7, just updated (yesterday). It had an onboard > RAID controller, and an HBA. I just installed a new, additional RAID

A gentle reminder on this issue Please can any one help on this problem? ________________________________ From: Manyam, Ramesh Sent: Wednesday, November 19, 2008 7:46 PM To: xen-devel@lists.xensource.com Subject: megaraid sas driver failing in Xen-3.4 unstable version On Xen-3.4 (unstable version), I have created CentOS HVM guest & WS2K8 HVM guest and dedicated MegaRAID SAS controller but

I have tried many permutations of search terms in google and I haven't been able to find any confirmation that the megaraid* modules in centos4 supports port multipliers/multiplexers. Here is a link to the controller I have in mind at newegg: http://www.newegg.com/product/product.asp?item=N82E16816118032 In case anyone is interested, here is what my research has turned up when looking for

Hello all, I'm currently experiencing an issue with an NFS server I've built (a Dell R710 with a Dell PERC H800/LSI 2108 and four external disk trays). It's a backup target for Solaris 10, CentOS 5.5 and CentOS 6.2 servers that mount it's data volume via NFS. It has two 10gig NICs set up in a layer2+3 bond for one network, and two more 10gig NICs set up in the same way in another

Life is much better now that I'm using -h instead of the manual. I have a new question about policies Direct and DisDskCache makes sense Cached and EnDiskCache makes sense not so sure about Direct and EnDskCache Cached and DisDsk Cache Do they make sense? -- Drew Einhorn

I have LSI Logic MegaRAID 8480 Storage controller I am having trouble reconfigure one of the hardware raid devices It is configured with 4 hardware raid logical volumes on /dev/sda /dev/sdb /dev/sdc /dev/sdd. I am in the middle of rebuilding the system, ?and at this point I am only using one of the volumes, /dev/sda /dev/sda, /dev/sdb, and /dev/sdd are all 2 drive raid1 mirrors I will be

On Xen-3.4 (unstable version), I have created CentOS HVM guest & WS2K8 HVM guest and dedicated MegaRAID SAS controller but I am not able to see the disk which is connected to MegaRAID SAS controller when I do fdisk -l (vtd support is enabled in Xen). Looks like the pci device(MegaRAID SAS controller) is getting dedicated successfully as I can see the device in the list of pci devices shown by