similar to: Regarding poor performance on DIR-300

Hi, we are using Tinc in our Freifunk Network in Oldenburg for internode connections over the internet. So Tinc is running on OpenWrt 10.03 on Dlink Dir-300 Routers. We all have enough internet bandwith (1,6 MB/sec and more) but we only get a maximum speed of ~350KB/sec between two tinc nodes because then tinc uses 99% of the cpu. Is it possible to get more Speed with tinc on this machines?

Hi, I´m using Tinc for several years, but I didn´t fix a performance problem. There a about 20 nodes in this network. Master: 10.0.0.12 (dedicated host in a datacenter, debian, 100mBit port) tinc.conf: Name = TincKnoten12 AddressFamily = ipv4 Interface = tun ProcessPriority=high mode = router #DirectOnly = no Compression=0 PMTUDiscovery = yes #IndirectData = yes #ReplayWindow = 64 #ConnectTo

Hi All, I am trying to setup the site-to-site VPN with TINC for connect my home network to company network. Here is the IP allocation and configuration for your reference. Home PC (192.168.1.2) ?-----? Home (OPENWRT Router, 192.168.1.1, 10.0.0.1) ?----------------? INTERNET ?-------------? COMPANY (Windows 7 PC,192.168.2.1, 10.0.0.2) ?------------? COMPANY (SERVER ZONE) ?----? SERVER A

El 12 de febrero de 2016 16:51:59 CET, Eric Yau <ericyaukhy at hotmail.com> escribi?: >Hi All, > > > >I am trying to setup the site-to-site VPN with TINC for connect my home >network to company network. Here is the IP allocation and configuration >for >your reference. > > > >Home PC (192.168.1.2) ?-----? Home (OPENWRT Router, 192.168.1.1, >10.0.0.1)

On Fedora 11 (yes, with SELINUX enabled and enforcing) setting tinc.conf's ProcessPriority=high prevents tincd from starting. Anybody have an answer? tinc was compiled by me, didn't come from Fedora's rpm repo.

Hello! I try to maintain a couple off old Openwrt based routers. The routers run openwrt whiterussian, so it quite outdated. But it is a little dangerous to update a remote machine from whiterussian to kamikaze or backfire, this may be usefull for others. I used the openwrt whiterussian 0.9 sdk and the attached Makefile to compile all tinc versions till 1.0.11. Since 1.0.11 the compile process

I have an OpenWrt 10.03 router [ IP: 192.168.1.1 ], and it has a DHCP server pool: 192.168.1.0/24 - clients are using it through wireless/wired connection. Ok! Here's the catch: I need to separate the users from each other. How i need to do it: by IPTABLES rule [ /etc/firewall.user ]. Ok! "Loud thinking": So i need a rule something like this [on the OpenWrt router]: - DROP

Hi, I have successfully connected a network of about 60 nodes (many of which are virtual machines) with tinc 1.0 but encounter a severe bug when physical connectivity between two major locations is lost and then reconnected. From what I gathered, many nodes attempt to connect to many other nodes, causing 100% CPU load on all nodes, taking down the whole network with no node succeeding connecting

i sent a product suggestion to HP. It was a request to use software that already exists in their JetDirect and Multifunction Fax machines to make them seamlessly interoperate with a fax gateway in a way transparent to the end user. Essentially, giving the sysadmin a choice in fax transport mechanism to route all faxes over analog telephone transport or over the network. Thank you for taking

On Wed, Dec 30, 2015 at 05:26:38PM +0000, Pierre Beck wrote: > I have successfully connected a network of about 60 nodes (many of which are virtual machines) with tinc 1.0 but encounter a severe bug when physical connectivity between two major locations is lost and then reconnected. From what I gathered, many nodes attempt to connect to many other nodes, causing 100% CPU load on all nodes,

Hello, I''m facing a strange issue with network card PCI passthrough on my openwrt test domU. - With network PCI passthrough, DNS lookup failed for some domains (exemple, google.com) but not for other (free.fr my ISP, or my domain jbfavre.org). I can ping an IP address without any problem. - Starting domU as a "normal" (ie without PCI passthrough), no problem. As far as I can

Hi, i tried to compile dovecot 2.2.0 and i end up with this error: make[6]: Entering directory `/mnt/data/Develop/Openwrt/trunk_git/build_dir/target-mips_r2_uClibc-0.9.33.2/dovecot-2.2.0/src/util' /bin/sh ../../libtool --tag=CC --mode=link mips-openwrt-linux-uclibc-gcc -std=gnu99 -Os -pipe -mips32r2 -mtune=mips32r2 -fno-caller-saves -mno-branch-likely -fhonour-copts

Hi Maxim See below. root at OpenWrt:/etc/tinc/acmevpn# modprobe -v tun -ash: modprobe: not found root at OpenWrt:/etc/tinc/acmevpn# lsmod tun Module Size Used by Not tainted crc_ccitt 928 0 root at OpenWrt:/etc/tinc/acmevpn# uname -a Linux OpenWrt 2.6.31.10 #1 Tue Jul 23 14:34:17 CEST 2013 mips GNU/Linux root at OpenWrt:/etc/tinc/acmevpn# opkg info

Hello, I have a UPS device connected (USB) to a Debian server, but I want to change it and connect to a OpenWRT router. I installed this packages: nut-server (2.6.5-2) nut-driver-blazer_usb (2.6.5-2) The problem is that I don't know where to configure it. Anyone with a UPS connect to a OpenWRT device? Thanks for your help. Regards. -- Josu Lazkano

Greetings. I'm new to tinc, but have so far managed to get a couple laptops and a hosted server all connected. They're working as expected, running Tinc 1.1-pre11, which I compiled from source. Next I want to move on to adding my home router into the mix. My routers run OpenWRT. I don't have experience compiling anything from source for OpenWRT, but OpenWRT has Tinc 1.0.25

Dear list, I'm currently trying to simulate a VPN in a very simple configuration at home. My normal home-net 192.168.0.0/24 serves as "the internet". Three test machines are used, two of them connected to "the internet": odin , external IP 192.168.0.100/24 on eth0 thor , external IP 192.168.0.101/24 on eth0 My VPN uses address space 10.0.0.0/8 in the following way: odin

Hi Guys I am wanting to test running tinc in openwrt. I need help on how to run it in openwrt. How do I compile tinc ? Regards Yazeed Fataar <yazeedfataar at hotmail.com> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail> This email has been sent from a virus-free computer protected by Avast. www.avast.com

On Tue, Jan 27, 2015, Sandy McArthur Jr wrote: > I use the Tinc 1.0 series since I don't want to support my > own packages. <snip> > I wrote most of http://wiki.openwrt.org/doc/howto/vpn.tinc and that is > what I still use. Since then . . . Ok. I think I'll start with the 1.0 series packages that are already out there and get them working. and on Tue, Jan 27, 2015,

Hey Saverio, I'd really like the idea of a tinc-1.1-pre package for OpenWRT. I'm currently using tinc-1.1 with an Ed25519-only network, really like the new features and CLI and want to add some OpenWRT routers into the mix. How do you plan to handle things with OpenSSL? tinc-1.1 from git should be able to compile without it (but will then only support the built-in algorithms). Depending

Saverio, it looks I'm using tinc on OpenWRT packaged by you) Thank you for it Is something there in that task, what is harder than https://wiki.openwrt.org/doc/devel/packages ? Anyway, I want to try On Thu, Nov 3, 2016 at 5:57 PM, Guus Sliepen <guus at tinc-vpn.org> wrote: > On Thu, Nov 03, 2016 at 03:43:42PM +0100, Saverio Proto wrote: > > > I am not using OpenWrt a