similar to: intel wifi and bridging - have u done it?

Hello all, this is not really an * question but it is somehow related, i am trying to develop a working proposal for cheap and quick telephony services using Voip running over *. By running a wireless network (over 802.11 a/b/g devices), i plan to be able to reach customers directly with eithe table top or handheld 802.11 sip enabled phones. But the disadvantage is that how do i power each radio

Rather off-topic, but I'm looking for IP-based KVMs (~16 ports) that can handle both PS/2 and USB hookups on the server side. All of the answers over at Slashdot are a few years out of date and it looks like prices on KVM head units have dropped a bit over the years. Some of the older units only worked with Windows, Internet Explorer and ActiveX. Others like the ATEN KH1516i supposedly

Hi, i''m trying to use PCI passthrough feature on Xen 4.0 but it fails on my Wireless card. I use Xen 4.0 on a Debian 6.0 (package from repo) and try to passthrough the following PCI device root@omega:~# dpkg -l | grep xen ii libxenstore3.0 4.0.1-1 Xenstore communications library for Xen ii linux-image-2.6.32-5-xen-amd64 2.6.32-30 Linux 2.6.32 for 64-bit PCs, Xen dom0 support ii

Hi, I am having some difficulties with matrix operations. It is a little hard to explain it so please bear with me. I have a very large data set, large enough that it needs to be split in parts in order to deal with. I can work things on these "parts" but the problem lies in adding together these parts for the final answer. So that been said, let's say that i split the data in 2

Dear list, I have a vector (array, table row, whatever is best) of frequency values for categories (or bins), and I need to find the median category. Trivial to do by hand, but I was wondering if there is a means to do it in R in an elegant way. The obvious medioan(vector) returns the median frequency for the binns, and that is not what I want. i.e,: freq cat1 1 cat2 10

Dear list-members! I am using OpenWRT (www.openwrt.org) on two accesspoints. Within OpenWRT, the wireless interface and the ethernet interface are bridged to one interface (br0). Those two accesspoints are standing quite far from one another. Their WLAN-cells do not cross each other, meaning I have an area in between the two accesspoints, where there is no accesspoint of the two accessible: a

hi list members, my goal is to make one of my DomU''s act as a wireless accesspoint... So, i need it to have access to the pcmcia wlan card attached to dom0. But how ? when i give the pci=[] option to the domU config file its shows up with lspci but i cant use it... (on debian with module-assistent get rt2x00 in de DomU) Is it possible or would it be better to use a more direct interface

Hi I have read the howto on qdisc''s a few times but I cant figure out how to use the shaping capabilities to serve my needs. In the village whera I live we have created a wireless local network consisting of 10 houses. One of these houses has an ADSL connection and services this connection to the other houses. To gain access to the network a member must have an accesspoint in client mode,

Hi All, I have my Asterisk box running with 6 extension all connected to CAT5 Grandstream phones. I'm trying to connect 2 extension on a different office across the hall by WIFI bridge using SMCWEBT-G configured as Ethernet client. If I connect the Grandstream to that box on the other office it works fine. If I connect the PAP2-NA, both extensions register with no problems with the Asterisk

> Close. 10/100mbps Ethernet uses wires 1,2,3,6 but that is pair 2 & 3. > Pair > one is the pair up the dead center (pins 4&5), pair 2 is pins 1&2, pair 3 > is > 3&6 and pair 4 is 7&8. A T1 uses pairs 1&2, which is why you can't use a > regular crossover cable for a T1 crossover, but you can use a regular > ethernet patch cable as a T1 patch

i created an ipset and added 8.8.8.8 to it and used the same iptables working all summer long but ?i can still ping 8.8.8.8 and do nslookup queries against it. ipset or iptables is broken. Anybody else rebooted since ipset-6.11-3.el6.i686 was installed and actually tested that IP addresses that are supposed to be blacklisted are actually blocked? ? Filed CentOS bug report 7977

Hello Everyone, I'm running a dhcp server on CentOS 4.4. It's providing IPs and remote booting for a number of thin clients. I've recently had problems rebooting a few thin clients. Here is the error I've been seeing: Jan 16 14:16:45 at01 dhcpd: DHCPRELEASE from 00:40:63:e5:71:4f specified requested-address. Jan 16 14:16:45 at01 dhcpd: DHCPRELEASE of 10.1.1.150 from

Hello, I have tried for days on end with no success on this, so I thought I would post it here and see if someone can help me at all. *Here's the scenario:* I have 1 PC with a Static IP/Domain (a dyndns.org account - myserver.homeip.net) connected to a router, which in turn is the gateway to the internet. It also has a static local IP (192.168.1.2). I will call this the "server"

Hi All, Greg has been a huge help getting me going with this tellabs echo can, but I'm still having some problems getting it to work... I suspect I wired it up incorrectly, so I thought I'd see if anyone can point me in the right direction. Digium tech support pointed me to this doc for a standard T1 cable: http://www.arcelect.com/RJ48C_and_RJ48S_8_position_jack_.htm which looks like it

Would it be extremely difficult to do multicast over tinc? How about reliable multicast over tinc? This would be more traffic than multicast dns, but not _necessarily_ a great deal more. It would be for syncing some information among freeipa domain controllers. Would the tinc nodes need to be in all in switch or maybe even hub mode? EthernetOverIP over tinc?

How does one specify two different ports in the same host file? When lapops are hardwired versus when mobile on a totally different lan. address0 71.17.72.27 address1 192.168.2.27 port0 22755 port1 655

What gives with the stupid stupid power system on the Polycom IP500 (I hope they changed it on the 501's). Anyway, does anyone know if you can get some type of joiner to connect two Cat5 cables together, and will this affect the call/signal quality because my Ethernet cable is longer than the dumb 11ft polycom supply (oh and their manual is the wrong about which end goes into the handset

i have a switched and bridged tincd node with two addresses, each with a different port. Address = 37.70.156.168 28655 Address = 192.168.2.228 655 i was having trouble reliably connecting to it / thru it and noticed that a log from a remote tincd node indicated it may have mixed up the ports. It doesn't appear to use the 28655 port that would be needed for remote access. Before i

Hi there Just a quick question, I will be building some servers in a lab utilizing Digium E1 cards. I would like if possible to avoid the expense of installing an e1/ISDN30 in my lab. I have two questions really, first does anybody know of an effective simulation tool I can use to replicate a real world PRI but without the telco line being installed. And secondly, can I have a scenario with 2

[This email is either empty or too large to be displayed at this time]