similar to: Tinc 1.0.3 on MacOs X

My intention is to set up tinc so that I can connect from home to an office network. All CPUs are running MacOs X, 10.2.8 or 10.3.5. I have read the tinc manual, tincd.8 and tinc.conf.5. However, I am still unclear about a few issues. First and foremost, how to I setup the VPN interfaces on the hosts, on MacOs X? Which file do I have to alter and what is the exact syntax on Os X to setup

I have now got the tinc demons (on network OFFICES) on BranchB and BranchA talking to each other, see below for log from BranchB. For some trouble shouting issues relating to OsX see at the end of my e-mail. However, I have not yet achieved the network connectivity/routing that I would like. The aim is: BranchB is a laptop I would like to connect it (via tinc) to my office network, so that

I have now got the tinc demons (on network OFFICES) on BranchB and BranchA talking to each other, and I have been able to access services (like AFP, Apple file sharing) between the two hosts (in both directions), but not beyond the local network connected to BanchA. I am unclear which routing can be provided by tinc and which routing would I have to add manually. The aim is: BranchB is a

Hy Jan, I'll put a copy on cran today. Thanks. stefano > > Get it from ftp://gifi.stat.ucla.edu in pub. > > This contains the base files plus the recommended packages (except > rpart, > which does not compile yet). > > It is compiled under MacOS X 10.1.2 with the December 2001 version > of > the Developer Tools, and with g77 from fink.sourceforge net.

I am looking for help how to install the Darwin binary under MacOS X 10.2.3 on a G4 or G3 powermac or recent iBook. Download of the binary yielded a file "tincd-1.0-darwin-powerpc-dynamic" This file is not recognized by the OS X installer, apparently it is not a package. I am well familiar with the Mac (GUI), have some basic knowledge in Unix and networking, and no experience with

Hello, this morning I apparently had tinc crash on me. In 2 independent tinc clusters of 3 nodes each (but located in the same datacenter), one tinc process crashed in each of the clusters. One process apparently with `status=6/ABRT`, the other with `status=11/SEGV`. Interestingly, they crashed with only 5 minutes difference. The only thing I can come up with that might explain this correlation

On Sat, Mar 21, 2015 at 01:01:47PM +0100, Raimund Sacherer wrote: > This is our setup which we are trying in a couple of our remote offices: [...] > FW-01 and FW-02 are Master/Slave firewalls (pfSense with Carp failover). We have currently 3 "remote offices" connected which have all basically the same setup, one office has more internet lines. > > Currently I have it

I get this error starting tincd: tincd -n vpndr -d5 -D tincd 1.0.26 (Jan 22 2016 19:28:17) starting, debug level 5 /dev/net/tun is a Linux tun/tap device (tun mode) Executing script tinc-up System call `getaddrinfo' failed: Name or service not known Terminating Also keepalived return an error when tincd start. Starting as a daemon. Joutnalctl show this: Jan 22 23:14:49 systemd[1]:

Hello List, This is our setup which we are trying in a couple of our remote offices: +---------------------------------------+ +-------------------------------------------------------------+ | | | | | +----------------+ |

Dear readers, Today i checked out a fresh copy of tinc from svn (rev 1432) and got the following: tinc[32605]: Got fatal signal 11 (Segmentation fault) tinc[32605]: Got another fatal signal 11 (Segmentation fault): not restarting. I've got two nodes set up in switch mode which work fine with tinc-1.0.2 (not with 1.0.3 due to the broadcast packet issue) gdb backtrace: Program received

Hello, I have 2 hosts HostA and HostB HostA - 10.38.9.2, kernel 2.4.16, tincd from Debian package HostB - 10.38.9.223, kernel 2.2.17-21mdk, tincd from tarball package. HostA: ------------------------------ /etc/tinc/test4/tinc.conf Name = HostA ConnectTo = HostB TapDevice = /dev/misc/net/tun PrivateKeyFile = /etc/tinc/test4/rsa_key.priv /etc/tinc/test4/hosts/HostA Subnet = 10.0.0.0/8 Port =

On Thu, Apr 16, 2015 at 10:09:05PM +0200, Raimund Sacherer wrote: > At first I really like the idea of having 3 Daemons on the headquarter, one for each ISP. The firewall should forward the port 655 from each ISP's public IP Address to my internal server and to the ports 655, 656, 657 respectively [...] > My question now is, for every tinc daemon I need a tun or tap device, so how

I installed a cross-compiler for PowerPC 603e (OSELAS-Toolchain from Pengutronix) on an i686 machine with Fedora 24. All steps for compiling tinc (https://www.tinc-vpn.org/examples/cross-compiling-windows-binary/) worked successfully. After compiling I verified the file type (file tincd) obtaining: tincd: ELF 32-bit MSB shared object, PowerPC or cisco 4500, version 1 (SYSV), dynamically linked,

Hello Guus. I've reading mailing list archives threads about it at http://www.tinc-vpn.org/pipermail/tinc/2011-July/thread.html#2757 and http://rutschle.net/pipermail/sslh/2011-July/thread.html and now trying to hide tinc server behind sslh multiplexer but without luck. First of all directly it works fine. Initiator (instance of tincd with ConnectTo statement) successfully establishes

Am 17.02.2017 um 10:59 schrieb Guus Sliepen: > On Fri, Feb 17, 2017 at 09:55:26AM +0100, Sandro Stiller wrote: > >> On my system, tinc is started on bootup. >> If the Network cable is not connected, tincd hangs forever after these messages: > [...] >> 2017-02-13 11:34:02 tinc.XXX[403]: Error looking up XXX.net port 2300: Temporary failure in name resolution > [...]

Hi Daniel, Yes, thanks and I should have mentioned that I am using pretty much the same thing you suggested on my routers, but for whatever reason couldn?t get that approach working on the linux box in question. Mark, Thanks for the upstart script. I had tried to do the same myself but couldn?t get my upstart script to work right. I was missing the ?-D? flag in my script. Added that and now

THis is the modified script that came with tinc 1.0pre2, and it now uses ifconfig in stead of ip-route. I changed the syntax to be correct (may already have been fixedin a newer version), it now checks whether or not there is a '/dev/tapX' or a '/dev/netlink/tapX' and it checks if there is a module or not. I also added the force_connect and the reload options. Force_connect send

net-misc/tinc-1.0.12 works for me on amd64 1. there is an official ebuild for 1.0.11, but not for 1.0.12 yet 2. my -r1 contains changed initscript 'tincd.lo' to be used like net.lo by ln -s tincd.lo tincd.vpn_name and then calling tincd.vpn_name to start/stop 3. it is in my overlay together with latest versions of some other software:

This is what we use on our routers, running once a minute via crontab. > if pgrep "tincd" >/dev/null; then > echo "tincd is running" > else > echo "tincd isn't running, restarting" > tincd -n nycmesh > fi On Fri, Jan 29, 2016 at 9:07 AM, pjv <pjv at pjv.me> wrote: > I have tinc 1.1pre11 running on various routers and linux

Mar 11 11:24:52 box1 tincd: Trying to connect to svr1 (a.a.a.a port 443) Mar 11 11:24:52 box1 tincd: Connected to svr1 (a.a.a.a port 443) Mar 11 11:25:02 box1 tincd: Timeout from svr1 (a.a.a.a port 443) during authentication Mar 11 11:25:02 box1 tincd: Closing connection with svr1 (a.a.a.a port 443) Mar 11 11:25:02 box1 tincd: Could not set up a meta connection to svr1 the log as above, I did a