similar to: routing issue?

Hi! Me and two friends are trying to get a VPN working, but we cant get routing between two tunnels. This is how it looks, all servers (192.168.*.1) are running IP Masquerade to enable the other computers behind them to access the internet. Both elayne and glenn are connecting to melc, and the tunnel between melc and glenn are running TCPOnly because that glenn doesnt have a public IP (it's

Hi! When I try to use tinc I get this message 'Cannot route packet: unknown type 0' when I try to ping or ssh to the box I'm connected to. Below is my setup: ifconfig tun device: -------------------- midkemia Link encap:Ethernet HWaddr FE:FD:00:00:00:00 inet addr:192.168.6.1 Bcast:192.168.6.255 Mask:255.255.0.0 UP BROADCAST RUNNING NOARP MULTICAST MTU:1500

Hello, I successfully use tinc for one year in a configuration with several subnets (about 5-7 subnets) and one main server. Sometimes tinc dies with the error message: Error while waiting for input: Bad file descriptor If it happens, this happens immediately, when one subnet has disconnected. tinc (on the main server) tries then to disconnect all currently connected subnets and while

I am seeing a problem that looks the same as that described in message: http://mail.nl.linux.org/tinc/2001-06/msg00000.html titled : Error: cannot route packet - please help The thread says it is fixed in the CVS version. I did a "cvs checkout -r CABAL tinc" and installed that version. Now tinc always fails trying to establish the meta-data connection. I assume I compiled something

Hello! I use tincd to interconnect 3 LANs: A, B and C. So long, it works fine: everybody reaches everybody. But I want a different behavior: A and B should be allowed to talk, as should B and C. I tried to simply delete the host-files on the nodes that should not be allowed to talk to eachother: A has a hostfile from B B has a hostfile from A and C C has a hostfile from B But this is no

hi, - big and ugly mail. If you don't like them, delete it now :-) - I have collected and classified some information of: http://home.earthlink.net/~rwhron/kernel/bigbox.html And I observed that ext3 performance is worse than previous kernels(2.4.19...). -ac and -aa are here only as reference. Complete information is in the upper URL. dbench: Performance is worse. dbench (Numbers are in

I've got a test lab set up and im having problems connecting. The first problem is that it takes it a couple of tries before it actually connects the two machines. It complains about bogus data and after trying for a minute or so it connects. kill -USR1 shows that they are connected kill -USR2 only shows the local subnet, not the remote I've tried these versions without any luck: cvs

On Thu, Mar 08, 2001 at 11:51:53AM +0100, Marcel Loesberg wrote: > I'm going to build a VPN and I want to use either Tinc or FreeS/WAN. > I've started building the VPN with FreeS/WAN and I find things are getting > rather complicated. > I looks like Tinc is much easier to configure but in the FAQ and in what I've > seen of the documentation so far there is no mention of

I gave tinc1.0pre3 a test after the modifications you have done today. It insists that it is still 1.0pre2 but this is due to the fact the you used "1" as tag for configure.in rather than "CABAL". Anyway - results were not much more successful than yesterday: *** SERVER side log file from startup until sone seconds after connection was established *** Jun 25 21:14:30 lemon

Hi Who concern, I setup TINC VPN follow these. 192.168.1.x / 24 (Client groups) | 192.168.1.1 (eth1) (GW1) 202.44.34.206 (eth0) || Internet || 202.44.45.14 (eth0) (GW2) 192.168.2.1 (eth1)

Hello everybody, I have just released tinc 1.0pre4. Changes: - New authentication protocol (better security, and faster too). - TCPonly and IndirectData are back (but not fully tested). - Documentation revised, it's really up to date with the released package now. - tincd -K now stores public/private keys in PEM format, but keys of 1.0pre3 can still be used. - Faster and more secure

Getting this warning compiling on an alpha, is it a problem? 2.4.15-pre4 gcc -D__KERNEL__ -I/usr/users/donjr/linux-2.4.15-pre4/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fomit-frame-pointer -fno-strict-aliasing -fno-common -pipe -mno-fp-regs -ffixed-8 -mcpu=ev5 -Wa,-mev6 -DEXPORT_SYMTAB -c journal.c journal.c: In function `journal_init_inode': journal.c:758: warning: long long

I have just released SYSLINUX 2.09-pre4 with a few changes: a) SYSLINUX should now correctly handle mode changes from within a COMBOOT program. b) Tweaks to the menu system to avoid the "grey text on black" problem. c) A new color scheme for the menu system (Murali, check it out and see if you think it works for you.) ftp://ftp.kernel.org/pub/linux/utils/boot/syslinux/Testing/

Hi People, I recently setup a replication service within dovecot between two machines in different datacenters, which has the following configuration; (yes it is hashed out, because I needed to) #service replicator { # unix_listener replicator-doveadm { # mode = 0666 # } # process_min_avail = 1 #} # #service aggregator { # fifo_listener replication-notify-fifo { # mode = 0666 #

hi, realtek 8139 \ 8100sc NICs can not be used PXELINUX 5.0 -> 6.0-pre4 version boot, please verify.

> Gesendet: Donnerstag, 27. Juni 2013 um 17:44 Uhr > OK, now that's just weird. You don't see any response whatsoever from > tapping at the keys? > > If you set a TIMEOUT, can you run a DEFAULT even though you cannot type? > That's one way to figure out whether the machine is dead at that point > or not. A useful DEFAULT might be reboot.c32, that way even if the

Hi ! I want to setup tinc 1.0 pre4 with kernel 2.4.5 I didn't find information about settings of tun/tap device I did in kernel - [*] Prompt for development and/or incomplete code/drivers Network device support <M> Universal TUN/TAP device driver support in /etc/modules.conf - alias char-major-10-200 tun mknod -m 600 /dev/tun c 10 200 chown 0.0 /dev/tun In mailing list archive I

Am 01. Juli 2013 18:13:25 schrieb Matt Fleming <matt at console-pimps.org>: > > Does reverting to -pre4 make things work again? > > -- > Matt Fleming, Intel Open Source Technology Center Yes, with pre4 it work. But as I wrote the problem during searching for the configfile and hung from the program already exist. Gesendet mit AquaMail f?r Android http://www.aqua-mail.com

I'm stuck behind a corporate NAT that I obviously have absolutely no control over. The nice thing is that the firewall rules, AFAIK, are very nice. I've had tinc running before from behind nazi firewalls with no NAT. Been fiddling with tinc for many hours, but have been SOL. The local machine is the client (has ConnectTo in the conf), and remote is the server (has Listen in the conf).

Hey all, heres my problem/s. I have to write code which upon a message from another component 1. Reserves bandwidth for a voip call between 2 hosts.My code will reside on neither of the hosts but the hosts will have to go through me to talk to eachother. 2. Since i''m reserving bandwidth for these hosts to talk to eachother i have to limit everything else. 3. I need to do this