similar to: Configuration Trouble

Hi Tinc Mailing Group, I've got Tinc-1.0pre3 set up on two Redhat Linux 6.2 / kernel 2.2.18 servers. It compiles okay, it reads the configuration files okay, it makes a valid connection between the two tincd daemons. However, it does not route data from one subnet to the other subnet. I will describe my setup below, and if anyone can suggest why it is not working, can they please reply to put

Hi Who concern, I setup TINC VPN follow these. 192.168.1.x / 24 (Client groups) | 192.168.1.1 (eth1) (GW1) 202.44.34.206 (eth0) || Internet || 202.44.45.14 (eth0) (GW2) 192.168.2.1 (eth1)

Dear Tinc Experts, I have been struggling for some time now, with Tinc pre3, and firewall rulesets and routing. I did once manage to get Tinc to work okay in a test-bed environment. I then tried to set it up for a 'real-life' setup and cannot get it to work properly. My real-life setup looks like this: Network A: 192.168.1.0 / 255.255.255.0 192.168.1.7 tap1 device gateway >

Hello, I have 2 hosts HostA and HostB HostA - 10.38.9.2, kernel 2.4.16, tincd from Debian package HostB - 10.38.9.223, kernel 2.2.17-21mdk, tincd from tarball package. HostA: ------------------------------ /etc/tinc/test4/tinc.conf Name = HostA ConnectTo = HostB TapDevice = /dev/misc/net/tun PrivateKeyFile = /etc/tinc/test4/rsa_key.priv /etc/tinc/test4/hosts/HostA Subnet = 10.0.0.0/8 Port =

Dear Tinc developer, I have some problems connecting to the other site of the VPN Here are my configuration files on pc1 Configuration files on pc2 /usr/local/etc/tinc/tinc.conf /usr/local/etc/tinc/tinc.conf Name = pc1 Name = pc2 TapDevice = /dev/tap0 TapDevice = /dev/tap0 PrivateKeyFile =

Voor de duidelijkheid... ---------- Forwarded message ---------- Date: Sun, 11 Jun 2000 16:14:37 -0500 From: gbarnett <gbarnett@satx.rr.com> To: guus@sliepen.warande.net Subject: TINC 1.0pre2: unable to access one private network Guus... I couldn't seem to get this to the mail list... could you post it and/or answer it for me? Thx. I have been having problems configuring TINC

Hi Ivo and Guus, We are writing a book on building VPNs for Linux and a part of it describes tinc. I wanted to make sure that your opinion, as tinc authors and developers, is reflected. First, let me ask a couple of technical questions. 1. If there are two hosts, foo and bar, that are to be connected via tinc, and each host should only have _one_ IP address (i.e. nmask is /32), would the

Hi, I?m fighting with a silly problem: my syslog tells me tinc cannot route a packet. I can use a telnet or the good ol ping, it is the same effect. When I?m pinging from the laptop (172.16.11.2) the network address (172.16.11.0) or any address numerically lower than the laptops address, the packet gets routed, otherwise not. And when I ping the network address, I get the reply twice, as to be

Hello, I already consulted related lists @freebsd.org [1,2] but I have remained unsuccessful to solve the following issue: VPN works for an internal IPv4 subnet, but I doesn't for an internal IPv6 subnet with ULAs. To be honest, I don't have any experience setting up a local IPv6; so I guess that I'm doing something wrong here. For those that know FreeBSD: The main aim is to connect

Hello, I'm having some routing issue with my tinc setup. I'm running a fairly basic VPN configuration between two networks: ------- Site A: ------- --- tinc-up --- #!/bin/sh /sbin/ifconfig tap0 hs ether fe:fd:00:00:00:00 /sbin/ifconfig tap0 10.11.1.2 netmask 255.0.0.0 /sbin/ifconfig tap0 -arp ---- tinc.conf --- Name = orca Hostnames = no InterfaceIP = 63.108.71.7 KeyExpire =

On Sun, 11 Jun 2000, David Summers wrote: > Thanks for the great software package! The question I have is this: Thank you :) > My goal is to set up a triangle topology VPN between three sites and run > OSPF routing on all the sites so that if a link goes down between any two > sites the OSPF routing will reroute the packets that used to go between > the sites A <-> B to A

I'm having a bit of a problem getting tinc up and running between a pair of RedHat (one 6.0, the other 6.1) boxes. It's installed and configured to the point where they can connect, but I'm not seeing any traffic passing between the two systems. System A looks like - tinc.conf: # Sample tinc configuration. # Insert your own ip numbers instead of the placeholders, # and be sure to use

I installed Tinc and started on two mashines. both connect and say everything is OK. But then when I try to ping through the VPN I get the following errors in syslog: on server: rtr-us tinc.vpn_net[911]: Metadata socket read error for BG_VPN (x.x.x.x - inet ip of client): No such process and on client ns tinc.vpn_net[301]: Incoming data socket error: Connection refused what does it mean as on my

Whens the point and click GUI coming out? All kidding aside, I seem to be confused about some of the network settings. Essentially all I want is a secure tunnel from machine A to B on two different physical networks, but I can't seem to get there. Just to get things figured out I've got two machines on the same physical network, mach A: 192.168.0.1, mach B: 192.168.0.3. bcast is

Hi, Although Im dutch too, Ill write this in english. I got a similar problem then the one on the helpforum. Ill paste my setup first server tincd.conf ---- ListenPort = 8089 MyOwnVPNIP = 192.168.100.1/24 #VpnMask = 255.255.255.0 TapDevice = /dev/tap0 Passphrases=/usr/local/etc/tinc/passphrases server tapdev ---- tap0 Link encap:Ethernet HWaddr FE:FD:C0:A8:6F:01 inet

I gave tinc1.0pre3 a test after the modifications you have done today. It insists that it is still 1.0pre2 but this is due to the fact the you used "1" as tag for configure.in rather than "CABAL". Anyway - results were not much more successful than yesterday: *** SERVER side log file from startup until sone seconds after connection was established *** Jun 25 21:14:30 lemon

Hi all, I have used tinc to get a vpn up and running I am almost there but have some problems at the end. My config: Building A Network 10.0.0.0 netmask 255.255.255.0 gateway 10.0.0.30 tap0 device on gateway machine 10.0.0.31 Building B Network 10.2.0.0 netmask 255.255.255.0 gateway 10.2.0.154 tap0 device on gateway machine 10.2.0.155 from network A I can ping 10.2.0.154 but not the other

I've got a test lab set up and im having problems connecting. The first problem is that it takes it a couple of tries before it actually connects the two machines. It complains about bogus data and after trying for a minute or so it connects. kill -USR1 shows that they are connected kill -USR2 only shows the local subnet, not the remote I've tried these versions without any luck: cvs

Hello, I'm trying to set up a vpn using tinc, so I installed tinc with the rpm version on my firewall as a listener. Setting up the tap device is no problem. The file /etc/tinc/tinc.conf looks like: TapDevice = /dev/tap0 MyVirtualIP = 192.168.2.1/24 Vpnmask = 255.255.255.0 When I start the script /etc/rc.d/init.d/tinc start it says something about missing /etc/tinc/nets.boot

> - Indirectdata finally REALLY REALLY works now! > - More precise debug messages Hmmm ... I can't prove that using the CVS code I checked out this morning. Everything works like yesterday: I can ping the peer but I canot go beyond: *** SERVER *** Jun 27 09:04:56 lemon tinc.9[10186]: tincd 1.0pre3 (Jun 27 2000 08:53:56) startin g, debug level 4 Jun 27 09:04:56 lemon tinc.9[10186]: