similar to: tinc from exposed to hidden computer

On Thu, Mar 08, 2001 at 11:51:53AM +0100, Marcel Loesberg wrote: > I'm going to build a VPN and I want to use either Tinc or FreeS/WAN. > I've started building the VPN with FreeS/WAN and I find things are getting > rather complicated. > I looks like Tinc is much easier to configure but in the FAQ and in what I've > seen of the documentation so far there is no mention of

Hi! Me and two friends are trying to get a VPN working, but we cant get routing between two tunnels. This is how it looks, all servers (192.168.*.1) are running IP Masquerade to enable the other computers behind them to access the internet. Both elayne and glenn are connecting to melc, and the tunnel between melc and glenn are running TCPOnly because that glenn doesnt have a public IP (it's

Hello everybody, I have just released tinc 1.0pre4. Changes: - New authentication protocol (better security, and faster too). - TCPonly and IndirectData are back (but not fully tested). - Documentation revised, it's really up to date with the released package now. - tincd -K now stores public/private keys in PEM format, but keys of 1.0pre3 can still be used. - Faster and more secure

Voor de duidelijkheid... ---------- Forwarded message ---------- Date: Sun, 11 Jun 2000 16:14:37 -0500 From: gbarnett <gbarnett@satx.rr.com> To: guus@sliepen.warande.net Subject: TINC 1.0pre2: unable to access one private network Guus... I couldn't seem to get this to the mail list... could you post it and/or answer it for me? Thx. I have been having problems configuring TINC

Was running 1.0pre2 just fine, but had to move machines, so I figgured I'd give 1.0pre3 a try. After getting everything to build and figguring out the new config files, here's where I'm stuck. Start the server process (remote machine). Start the client process (local machine). In remote machine, the following shows up in syslog: tinc[2659]: Got SEGV signal In local machine, the

Dear tincerers- Please help, I need to get this working *today* (ack!). I've installed tinc 1.0p3 on two machines fully updated rh7, "stockton" and "lodi", where "lodi" is trying to "ConnectTo" "stockton". When I start the tinc daemens on each side, this is what i get in my logs: Stockton: Feb 23 19:07:57 srouter tinc.pacheart[2794]: tincd

Dear tincerers- Please help, I need to get this working *today* (ack!). I've installed tinc 1.0p3 on two machines fully updated rh7, "stockton" and "lodi", where "lodi" is trying to "ConnectTo" "stockton". When I start the tinc daemens on each side, this is what i get in my logs: Stockton: Feb 23 19:07:57 srouter tinc.pacheart[2794]: tincd

When I try to install the tinc RPM I am missing [root@relay buytaert]# rpm -vih tinc-1.0pre2-1.i386.rpm error: failed dependencies: libgmp.so.2 is needed by tinc-1.0pre2-1 [root@relay buytaert]# ls /usr/lib/libgmp.so.3 /usr/lib/libgmp.so.3 [root@relay buytaert]# rpm -qf /usr/lib/libgmp.so.3 gmp-3.1.1-3 This seems to be a too recent version. So I tried compiling it and got the following

Hi all, I have been using tinc successfully for a while now. However, I need to do something different from my normal setup, and i am getting the feeling I am doing something obvious wrong. What I want to do is hookup 5 distant linux routers into one bigger network, Since I need to transmit both unicast and multicast traffic, the VPN network has to be in "Mode = switch" [Assumption

Hi, I upgraded some of my Tinc nodes from 1.0.8 recently and found something strange. All of a sudden, the vpn would not work as a full-mesh. Certain nodes were not contactable. I re-generated my rsa-keys, and checked my configuration. My vpn uses the following in tinc.conf, as I am routing both ipv4 and v6. === name = node1 mode = switch AddressFamily = any PMTU = 1280 PMTUDiscovery = yes

I'm stuck behind a corporate NAT that I obviously have absolutely no control over. The nice thing is that the firewall rules, AFAIK, are very nice. I've had tinc running before from behind nazi firewalls with no NAT. Been fiddling with tinc for many hours, but have been SOL. The local machine is the client (has ConnectTo in the conf), and remote is the server (has Listen in the conf).

Hi Tinc Mailing Group, I've got Tinc-1.0pre3 set up on two Redhat Linux 6.2 / kernel 2.2.18 servers. It compiles okay, it reads the configuration files okay, it makes a valid connection between the two tincd daemons. However, it does not route data from one subnet to the other subnet. I will describe my setup below, and if anyone can suggest why it is not working, can they please reply to put

Hi guys!! I've followed the windows 2000/xp tutorial and not only, but it seems not to work! I've for sure committed some errors... PC (under NAT) files: tinc/vpn/tinc.conf tinc/vpn/rsa_key.priv tinc/vpn/hosts/elegos tinc/vpn/hosts/shadowkrad tinc.conf: Name = elegos ConnectTo = shadowkrad TCPOnly = yes Interface = VPN (TCPOnly as under a NAT) rsa_key.priv: -----BEGIN RSA PRIVATE

> homeClient<br> > Network Bridge: (local Area Network and TAP-Win32) 192.168.6.107 mask 255.255.255.0 gw 192.168.6.1<br> change -> mask 255.255.0.0 > Tinc.conf<br> > Name = homeClient<br> > ConnectTo = vpnoffice<br> > Mode=switch<br> Change -> Mode=router Why everybody wants switch??? Add -> TCPonly=yes > vpnoffice: Network

Hello again :) Thank you all for your reply's. Below are the config files of the 3 hosts. I use  tinc in router mode. I do not have a kernel mode config lines anywhere so tinc must be using the default settings here. I added the ipaddressx to subnets on hostc and this works. Traffic to that ip is now routed via hostc. But since this ipaddressx address changes often I need to resolve it

I'm probably thinking way too hard on this... but I've already got a headache. I've setting up a VPN for a client between two sites. Someone had recommended vtun, so I gave it a try. I was VERY put off by the lack of decent documentation. I _think_ I got a VPN set up between the two sites, but it wasn't working right and I gave up because the documentation sucked. So, then I

> - Indirectdata finally REALLY REALLY works now! > - More precise debug messages Hmmm ... I can't prove that using the CVS code I checked out this morning. Everything works like yesterday: I can ping the peer but I canot go beyond: *** SERVER *** Jun 27 09:04:56 lemon tinc.9[10186]: tincd 1.0pre3 (Jun 27 2000 08:53:56) startin g, debug level 4 Jun 27 09:04:56 lemon tinc.9[10186]:

"PrivateKeyFile" as this is default, otherwise configuration is quite minimal. ======= Configuration ========= Server Side =========== # cat tinc.conf Name = fsvpns3f30 Mode = switch Device = /dev/net/tun AddressFamily = ipv4 PingInterval = 30 PrivateKeyFile = /etc/tinc/fsvpn/rsa_key.priv # cat tinc-up #!/bin/sh ifconfig $INTERFACE 10.10.100.30 netmask 255.255.0.0 # cat

Hi there!!! I'm returned to TINC :D I've got a question: I've setted up a server in a provider's NAT, and all users of this VPN are in the same provider's NAT... Well, I let the main server connect to all users, but... only the first ConnectTo works... in fact I've noticed that if the first user connects to another one, the last can connect to the server, while he

Guus, or anyone that will help ... Okay.. I've been running tinc for a few months now, and Its been working pretty well with my machine. Attempts to install it on others WinXP Pro, WinXP Home, and WinNT boxes have been spotty at best, with some installations working perfectly, and some not working at all. My latest issue is this. My windows 2000 machine can connect perfectly to our external