similar to: Network confusion

> - Indirectdata finally REALLY REALLY works now! > - More precise debug messages Hmmm ... I can't prove that using the CVS code I checked out this morning. Everything works like yesterday: I can ping the peer but I canot go beyond: *** SERVER *** Jun 27 09:04:56 lemon tinc.9[10186]: tincd 1.0pre3 (Jun 27 2000 08:53:56) startin g, debug level 4 Jun 27 09:04:56 lemon tinc.9[10186]:

Hi, Although Im dutch too, Ill write this in english. I got a similar problem then the one on the helpforum. Ill paste my setup first server tincd.conf ---- ListenPort = 8089 MyOwnVPNIP = 192.168.100.1/24 #VpnMask = 255.255.255.0 TapDevice = /dev/tap0 Passphrases=/usr/local/etc/tinc/passphrases server tapdev ---- tap0 Link encap:Ethernet HWaddr FE:FD:C0:A8:6F:01 inet

Hello Mads, In case you never saw any mail from me, I'm tinc's co-author. It would be helpful if you'd subscribe to the tinc developpers mailing list. It's not high volume, but it eases communication. There's a problem with tinc's boot scripts (at least the debian one, but that's fixed now). The netmask of the tap devices should be larger than the one specified with

Installing the new tinc on a system (Mandrake 7.0) that uses bash2 as it shell turned up a problem with the redhat initialization script. Attached is a patch to make it functional for both bash and bash2. - Jamie -------------- next part -------------- diff -uNr tinc-1.0pre2.org/redhat/tinc tinc-1.0pre2/redhat/tinc --- tinc-1.0pre2.org/redhat/tinc Fri May 26 05:22:49 2000 +++

G'day, I've just downloaded the tinc-1.0pre3 and compiled it - it seems to work fine. I tried your tinc start script in the redhat directory, first adding the MyOwnVPNIP = 10.1.3.1/16 VpnMask = 255.255.0.0 to my tinc.conf file as suggested. But now when TINC is invoked, tinc exits with the following error. [root@platypus tinc-1.0pre3]# /usr/local/sbin/tincd -n wurley.vpn Failed to

THis is the modified script that came with tinc 1.0pre2, and it now uses ifconfig in stead of ip-route. I changed the syntax to be correct (may already have been fixedin a newer version), it now checks whether or not there is a '/dev/tapX' or a '/dev/netlink/tapX' and it checks if there is a module or not. I also added the force_connect and the reload options. Force_connect send

I created an application that uses dynamic forking and it works perfect in windows, but fails in wine. Is this a bug or is this feature disabled in Wine? I don't have wine myself but someone we have testing the app for us does. It's difficult to debug over the net so I was hoping for some help here... After adding some debug info we've traced a few failure points to a call to

>> I run the very new tinc on both sides this time. >> Both sides had "IndirectData = yes" in their tinc.conf. >> Procedure was to start tinc on server side, then start tinc on client >> side. So far everthing looked okay. Then (12 seconds later - 22:39:37) I >> tried to ping the server side (=VPN peer) at 192.168.9.1 but without >> success. > >

I gave tinc1.0pre3 a test after the modifications you have done today. It insists that it is still 1.0pre2 but this is due to the fact the you used "1" as tag for configure.in rather than "CABAL". Anyway - results were not much more successful than yesterday: *** SERVER side log file from startup until sone seconds after connection was established *** Jun 25 21:14:30 lemon

Hi Ivo, --On Freitag, 23. Juni 2000 01:15 +0200 Ivo Timmermans <zarq@icicle.yi.org> wrote: > I'm not sure I fully understand your patch. This is not so important since I'm trying to get 1.0pre2 running. Although I had no luck so far, I'll point out what's going wrong at the end of this mail. > For instance, you force a > key exchange when the connection is made,

Hello all, I've been playing with tinc to setup a wan between two offices of the company that I work for. I'm partially there but having a slight problem. tinc comes up between the 2 machines (both 2.2.14 debian woody machines), and I can ping from the vpn machine at office a, and get a response from office b. However, if I ping any other machine across the wan I can't get a

Stimate Domn (Doamna), Imi permit sa va prezint oferta noastra de teren (loturi de 500mp) in apropierea plajelor Corbu si Vadu (10 km nord de Mamaia) langa viitoarea Statiune EUROPA, terenuri cu propunere intravilan, intr-o zona superba, ce cunoaste o dezvoltare accelerata in ultimii 2 ani, deschizand posibilitati avantajoase de investitie pe termen scurt si mediu sau ofera sansa

Hi, I'm trying to generate a multiple domain browselist but I don't get it to work. I've tried everyting by the book but the result is always the same: I can see the other workgroup(s) but they are empty. Currently I've added the following rules to the smb.conf remote browse sync = 192.168.2.2 192.168.2.4 remote announce = 192.168.2.2 192.168.2.4 As far as I understand

On Sun, 11 Jun 2000, David Summers wrote: > Thanks for the great software package! The question I have is this: Thank you :) > My goal is to set up a triangle topology VPN between three sites and run > OSPF routing on all the sites so that if a link goes down between any two > sites the OSPF routing will reroute the packets that used to go between > the sites A <-> B to A

hello- i am using rsync via ssh to maintain a copy of a few directories on a remote server, and am getting an error when rsync tries to chmod a certain file following it's transfer. there are a couple of cases in which this occurring - below is one example. local machine is debian testing - rsync version 2.6.3 protocol version 28 remote machine is macos x 10.3.7 - rsync version 2.6.2

Hello tincers, I run a small tinc mesh using version 1.1pre10 on mostly linux (debian) hosts. In the past, I was able to successfully join my windows machine to the tinc network, when I was running an earlier version of tinc (throughout the mesh). However, with 1.1pre10, I have had no success. Is this a known error, a misconfiguration on my part, or some other issue? I currently have no tinc-up

Although we (the authors of tinc) have done our best to make tinc as secure as possible, an unfortunate combination of encryption and key exchange techniques has created a hole in at least all versions of tinc >= 0.3, including the current CVS version. Exploit: If somebody can intercept the meta protocol to a host that is running a tinc daemon, it is possible to decrypt the passphrase, which

Although we (the authors of tinc) have done our best to make tinc as secure as possible, an unfortunate combination of encryption and key exchange techniques has created a hole in at least all versions of tinc >= 0.3, including the current CVS version. Exploit: If somebody can intercept the meta protocol to a host that is running a tinc daemon, it is possible to decrypt the passphrase, which

Greetings, I've been pulling my hair out on this problem for several days and I'm not really any closer to a solution. I hope someone out there can help me. I'm trying to set up a samba PDC on a Fedora Core 2 box using an LDAP backend (on another server). The base install of everything is working fine. At the unix level LDAP connectivity is configured and working properly for

I am trying to change some ACLs on some files and directories. I have samba binaries with acl support compiled in. I am using an XFS filesystem. The Mandrake kernel supports acls by default. When I right click on the file in Windows explorer and change the permissions, I get an access denied error. If I use smbcacls, I get the following: [root@luna tmp]# smbcacls //luna/tmp test.txt -U jim -A