similar to: Problems with Powerware 5115 on Patsburge USB

We're seeing some strange timeout errors on some new Supermicro X9DRT-HF MB's we here when combined with KINGSTON HyperX 3K SSD's It seems that when connnected to the second channel reads often timeout stalling all IO under 8.3-RELEASE-p3 When this happens we see:- Jul 27 14:35:59 lon059 kernel: ahcich1: Timeout on slot 0 port 0 Jul 27 14:35:59 lon059 kernel: ahcich1: is 00000000 cs

________________________________ From: "speex-dev-request at xiph.org" <speex-dev-request at xiph.org> To: speex-dev at xiph.org Sent: Wednesday, August 7, 2013 11:43 PM Subject: Speex-dev Digest, Vol 110, Issue 1 Send Speex-dev mailing list submissions to ??? speex-dev at xiph.org To subscribe or unsubscribe via the World Wide Web, visit ???

Greetings, I have been using the bcmxcp_usb driver heavily over the last two years as part of a very successful product, first from NUT 2.4.1 and now from NUT 2.6.0. Now I have a need to do setvar of the outlet.n.delay.start variables, so recently I modified bcmxcp.c to do that. I've tested it and it works well for my purposes. My plans are to begin shipping that modified driver as part

Hi, I am working with a westemere based server. I need to find out if the NIC installed there supports SR-IOV - what would be the best way to determine that? Regards, Kashyap hwconfig ------------- Summary: HP DL160 G6, 2 x Xeon E5620 2.40GHz, 15.7GB / 16GB 1333MHz, 1 x 500GB SATA System: HP ProLiant DL160 G6, C-2N/16/500, ySPEC 25.0 Processors: 2 x Xeon E5620 2.40GHz (HT

Hey there.. I was wondering if anyone could share experiences they have had with the Intel ICH10R SATA controller? I tried looking around but all I could find were RAID references, I have no interest in using the RAID functionality just basic SATA JBOD. Wondering if there are any gotchas for performance, drivers, quality etc. I normally don't touch anything that is not hardware RAID though

Hi Folks: I run into a problem when enabling Xen in next generation server platforms with Xen c/s is 21380. Xen reported "CPU Not responding" when booting up 32 CPUs( 2 sockets with 8 cores/16threads total). The log files belonging showed something wrong with APCI. So I added x2apic=0 in the xen grub line, but the symptom remained. However, Native RHEL5.5 can

During the last month, I've been integrating a Powerware 5115 into an embedded system by writing a custom NUT daemon. This work has gone quite well and NUT has been very helpful, but it sure would be nice to have some additional instcmds for the 5115. The bcmxcp driver comments mention "manuals for the BCM/XCP". I'm wondering if I could get a copy of those so that I might

I'm running Solaris 11 Express (snv_151a X86) with NUT 2.6.0 compliled from the source tarball and a Powerware 5115. I was seeing the driver hang, so gave it some '-D's (23 apparently ;-) and found that it seems to be getting into an infinite loop when reading data from the UPS. The debug output is attached and I would be very grateful for some help or advice on what to try next.

Hi, just wanted to provide a upsc dump for an Eaton/Powerware 5115 rack mount unit. This was on a CentOS 7.3 machine with following packages installed: nut-client-2.7.2-3.el7.x86_64 nut-2.7.2-3.el7.x86_64 nut-cgi-2.7.2-3.el7.x86_64 $ upsc eaton5115 ambient.temperature: 43 ambient.temperature.high: 75 battery.charge: 100 battery.runtime: 24171 battery.voltage: 40.96 device.mfr: Eaton

Hi everyone, Been searching like crazy to find an answer to this. I have even read some of the source code but cannot figure this one out. I have installed nut 2.4.1 on my QNAP 409 Pro. (command: ipkg install nut) I have configured the ups.conf, upsd.conf and upsd.users. When i run "upsdrvctl start" I get the following error messages and output.

Hello, ppl! I try configure NUT for communicate with my Powerware 5115 UPS. As root I run '/lib/nut/bcmxcp_usb -DDDD -u root -a ups', but driver can't connect to my UPS. Some output: Network UPS Tools - BCMXCP UPS driver 0.10 (2.0.4) debug level is '4' usb_set_debug: Setting debugging level to 3 (on) usb_os_init: Found USB VFS at /dev/bus/usb usb_os_find_busses: Found 001

Hi Georg, > one question with regard to a Powerware 5115 UPS connected to a Debian 3.1 > Sarge box via USB: I downloaded and compiled nut 2.0.2 but I am unable to > configure the USB subsystem so that upsdrvctl recognizes the UPS. > > My /usr/local/ups/etc/ups.conf contains: > > [bla] > driver = bcmxcp > port = /dev/usbdev2.2 > desc = "bla bla

I've got some strange problem with NUT on my 5115 on Debian Etch: ---snip--- $ sudo ./bcmxcp_usb -DDDDDDD -a 5115 Network UPS Tools - BCMXCP UPS driver 0.13 (2.3.0-1181) Warning: This is an experimental driver. Some features may not function correctly. debug level is '7' Can't set POWERWARE USB configuration Unable to find POWERWARE UPS device on USB bus Things to try: -

Hi All! I have the question, why reverted the ICH10 support from 7.1? This is the svn commit: http://svnweb.freebsd.org/viewvc/base/releng/?pathrev=186551 What is the PR number of the base of this commit or what is the problem description? I have a motherboard with ich10r with 3 sata2 disc (hitachi) + 1 sata dvd-rw (samsung), without any problem. Sorry for bad spelling or english

Hello. I've tried to configure Windows (complete port, Beta): Windows MSI installer 2.6.0-1 with my Powerware 5115 connected via USB port but have no luck. Here is my config files: *nut.conf:* MODE = netserver *ups.conf:* [PW5115] driver = bcmxcp_usb port = notUsed desc = "PowerWare 5115" *upsd.conf:* LISTEN 192.168.1.12 3493 *upsd.users:* [monuser]

hi, i have new supermicro server (centos5, 2.6.30.9/2.6.27.34/2.6.18-distro kernels, wanpipe 3.5.6) card is: 1 . AFT-A101-SH : SLOT=4 : BUS=8 : IRQ=11 : CPU=A : PORT=1 : HWEC=32 : V=36 and i have this in log irq 17: nobody cared (try booting with the "irqpoll" option) Pid: 0, comm: swapper Not tainted 2.6.30.9rh #1 Call Trace: [<c0465b07>] __report_bad_irq+0x27/0x90

Hi, I'm trying to get a Powerware 5115 to communicate with the NUT via USB under Debian Linux and need help. Here is the output that I see. co-nh5:/tmp/mnt/projects/pwusb/nut-2.4.1# /usr/local/ups/bin/upsdrvctl -u root start Network UPS Tools - UPS driver controller 2.4.1 Network UPS Tools - BCMXCP UPS driver 0.21 (2.4.1) USB communication subdriver 0.17 Communications with UPS lost:

Hi Arnaud, Any luck with the latest subversion trunk? From: Greg Sent: Wednesday, May 13, 2009 10:34 PM To: Greg ; Arnaud Quette Cc: Kjell Claesson ; nut-upsuser at lists.alioth.debian.org Subject: Re: [Nut-upsuser] Nut and PowerWare 5115 Hi Arnaud, Some more testing on Ubuntu 9.04. Here is the output of bcmxcp_usb and lsusb ============================================ root at

Greetings, The way that bcmxcp_usb reacts to and recovers from a USB cable unplug-plug appears to have changed significantly between 2.4.1 and 2.6.0. While I can see some improvements, bcmxcp_usb 2.6.0 does not appear to handle a USB cable unplug-plug correctly. Does anyone know if this has been fixed in subsequent releases? Here are the details. When the USB cable between my server and my

On 7/28/2016 3:41 PM, Fawzy Ibrahim wrote: > LSI SATA MEGARAID 95Q9 afaik, the megaraid cards are mostly all SAS, which support SATA drives, except very old ones were SCSI. Ok, I do see they had a series of MegaRAID SATA 150-xx and 300-xx cards, these were 64 bit PCI or PCI-X cards. 95Q9 does not appear to be a valid card number, 9240, 9260, 9280 are some pci-express SAS MegaRaid