similar to: [Bug 115] New: incorrect "state RELATED,ESTABLISHED" checking with two interfaces

Hi, I would like to know if somebody can point me out how to configure several DomUs in a private LAN (for example 192.168.100.0/24) and one DomU with two interfaces (one - 192.168.100.0/24 and two - internet). So far I have enabled in xend-config.sxp: (network-script network-route) (vif-script vif-route) My config files have: /mnt/VM/1.cfg:vif = [''ip=192.168.1.3'']

Rob, Don't know how this one got on samba-docs but I am forwarding it to the main samba list. Thanks. Cheers, jerry Rob Malpass wrote: > > So your Linux box can see your Windows machine but Windows can't see your Linux box ? > > If this is caused by upgrading to 2.0.6 I can't offer much help. Sounds like you've done the obvious things e.g. > > 1)

Greetings list, I've been banging my head against this for a few days now, so finally I throw myself upon your tender mercies. I had rsync working fine to make offsite backups via an IPSEC VPN over an ADSL connection - until the remote raid5 server went down. It was rebuilt with RedHat 8 and since then I have not been able to rsync to it. Both ends have vanilla rsync-2.5.5 installed.

Hello, I run samba 3.0.4 on a RHL9 server. Samba is a domain member of a W2k3 ADS and I use CUPS as printing mechanism; therefore Samba is compiled with Kerberos 1.3.1-7 and cups-devel. 3.0.4 runs pretty good, printing via CUPS runs well too, only the following messages I see constantly (this flooding my logs) while using 3.0.4: winbindd.log ========= [2004/07/27 16:07:04, 1]

Greetings List. we're facing a strange case with my system where in the middle of the call .. after like 7 minutes (not necessarily ) the callee is unable to hear the caller however the caller is able to hear the called party. the scenario is the following. 1- 15 computers running Windows XP SP3 joining a Windows Domain Controller with DHCP , DNS, ISA Internet Acceleration Server. 2- Internet

Hi, I have a little problem to setup iproute in my network It looks like this: ---- ----- ------ R1 R2 R3 ---- ----- ------ | | | | | | ------------------------------- ETH1 ETH2 ETH3 ETH0 ETH4 -------------> DMZ ------------------------------ | |

Believe me, I have tried everytbing I can think of to solve this problem. I will work my tail off to resolve this but I am fresh out of ideas. Any suggestions would be GREATLY appreciated. Here are the details... problem: server can see machines/shares on clients but clients cannot see machines/shares on server workgroup/domain: golgerth no router server: rpms: kernel 2.4.18.19.8.0

I'm not able to use samba and vmnetnat. Please help me because this is making me crazy. I use XP on an ADSL connection. PPPoE IP is assigned dinamically. Eth0 IP can be assigned dinamically or statical *tried both* RedHat 8.0 is the guest, XP service pack 1 is the host. I also uses sygate firewall on XP *but i set allow all for testing* Linux routes via NAT and it works fine (even DNS

On 13/05/2019 17:05, Steve Litt via samba wrote: > Hi all, > > Behavior described in this email is identical whether I try to mount at > 192.168.100.2, my desktop and location of my Samba server, or > 192.168.100.239, my laptop that is remote from my desktop with Samba > server... > > I want to mount a share defined on my Linux desktop, on my Linux > laptop, as a better

Hi all, Behavior described in this email is identical whether I try to mount at 192.168.100.2, my desktop and location of my Samba server, or 192.168.100.239, my laptop that is remote from my desktop with Samba server... I want to mount a share defined on my Linux desktop, on my Linux laptop, as a better alternative than sshfs or NFS. I want this mount to happen as version 2.x or 3.x, not as

Hi all, I can't login. This is a dovecot server for a small inhouse network, and I doon't use any encryption, and just want to login using the standard Linux login dovecot status gives me the following error messages: un 12 12:30:06 ulmke2 dovecot[5814]: auth: Fatal: APOP mechanism can't be supported with given passdbs Jun 12 12:30:06 ulmke2 dovecot[5811]: master: Error:

Hi, What did I miss / do wrong? My config didn't work like on the below linked video: http://www.samba.org/~tridge/ctdb_movies/node_disable.html With my config, the copy process fails/breaks despite that the tesztxp PC successfully maps the other (samba) PC in case the first (samba) PC is out. In the samba logs (even at log level = 10) I didn't see any information that can help me solve

Hi Aki and Remo, switch from vpopmail driver to SQL driver (if you are using vpopmail with mysql as backend) is very simple. First you need to setup the right query for vpopmail database: # cat /etc/dovecot/dovecot-sql.conf.ext ### Vpopmail driver = mysql connect = host=192.168.1.2 dbname=vpopmail user=vpopmail password=Vp0pM4iL default_pass_scheme = MD5-CRYPT ### Query to get a list of all

After building the latest CVS sources obtained this morning 6/12/03 I can not log in to my Samba PDC using a LDAP backend. Can someone tell me what I am dooing wrong please. --- windows event log Event Type: Error Event Source: NETLOGON Event Category: None Event ID: 3210 Date: 6/12/2003 Time: 12:29:33 PM User: N/A Computer: JEFF-WS Description: This

I get this error message in my syslog. I have searched the list but I can't seem to find a answer that solves the problem. chan_sip.c: Registration from '<sip:2238@192.168.100.1;user=phone>' failed for '192.168.100.2' The asterisk server is running dev head. The server is the 100.1 ip. I have 3 ata186's numbered 110.2-4. In sip.conf I have 6 entries all the same

We are attempting to configure SIP trunking between asterisk 1.2.22 and a Mitel 3300 CX box. The Mitel machine will gateway to the PSTN for us. I found this earlier post about doing this from July: http://lists.digium.com/pipermail/asterisk-users/2007-July/191630.html Unfortunately the promised configs never came ;(. We're having the exact reverse problem: we can register with the Mitel

Hi, Although Im dutch too, Ill write this in english. I got a similar problem then the one on the helpforum. Ill paste my setup first server tincd.conf ---- ListenPort = 8089 MyOwnVPNIP = 192.168.100.1/24 #VpnMask = 255.255.255.0 TapDevice = /dev/tap0 Passphrases=/usr/local/etc/tinc/passphrases server tapdev ---- tap0 Link encap:Ethernet HWaddr FE:FD:C0:A8:6F:01 inet

Hi! It''s me again bothering you guys, what I want to do is to give full bandwidth to VPN traffic and limit the rest to 30KB/s (kilobytespersecond), ok? Here''s what I have: tcclasses ################################## eth0 1 1kbps 70kbps 1 eth0 2 1kbps 30kbps 2 default eth1 3 15kbps 10000kbps 1 eth1 4

Hi all, first time that i tried to use xen. My goal is to reach in ssh all the domUs after i manage to get a connection through openvpn. Like they were real servers. I installed the openvpn server on my dom0 (ubuntu 9.04 + default package + latest debian-xen-amd64 kernel) After connecting to the openvpn server I''m able to do direct ssh just to the dom0. For reaching domU i had do it with

I've managed to turn on "plain" and now it seems I can logon. Jun 13 17:24:20 ulmke2 dovecot[1973]: imap(ulw)<2474><+kyqk4du5M7AqGQd>: Namespace '': Mail storage autodetection failed with home=/u/ulw in=0 out=373 deleted=0 expunged=0 trashed=0 hdr_count=0 hdr_bytes=0 body_count=0 body_bytes=0 Jun 13 17:24:20 ulmke2 dovecot[1973]: imap-login: Login: