similar to: [RFC PATCH] virtio-spec: ack the announce notification through ctrl_vq

During link announcement, driver needs a method to notify device that it has received the notification and let it clear the VIRITO_NET_S_ANNOUNCE bit in the status field. Doing this through a dedicated command looks suitable for all platforms (especially for the ones who don't trap the status read or write) with a ctrl vq and can solve the race between host and guest. So this patch makes

During link announcement, driver needs a method to notify device that it has received the notification and let it clear the VIRITO_NET_S_ANNOUNCE bit in the status field. Doing this through a dedicated command looks suitable for all platforms (especially for the ones who don't trap the status read or write) with a ctrl vq and can solve the race between host and guest. So this patch makes

This patch introduces the multiqueue capabilities to virtio net devices. The number of tx/rx queue pairs available in the device were exposed through config space, and driver could negotiate the number of pairs it wish to use through ctrl vq. Signed-off-by: Jason Wang <jasowang at redhat.com> --- virtio-0.9.5.lyx | 180 ++++++++++++++++++++++++++++++++++++++++++++++++++++-- 1 file

This patch introduces the multiqueue capabilities to virtio net devices. The number of tx/rx queue pairs available in the device were exposed through config space, and driver could negotiate the number of pairs it wish to use through ctrl vq. Signed-off-by: Jason Wang <jasowang at redhat.com> --- virtio-0.9.5.lyx | 180 ++++++++++++++++++++++++++++++++++++++++++++++++++++-- 1 file

Add multiqueue support to virtio network device. Add a new feature flag VIRTIO_NET_F_MULTIQUEUE for this feature, a new configuration field max_virtqueue_pairs to detect supported number of virtqueues as well as a new command VIRTIO_NET_CTRL_STEERING to program packet steering. Signed-off-by: Michael S. Tsirkin <mst at redhat.com> -- Changes from v2: Address Jason's comments on v2: -

Add multiqueue support to virtio network device. Add a new feature flag VIRTIO_NET_F_MULTIQUEUE for this feature, a new configuration field max_virtqueue_pairs to detect supported number of virtqueues as well as a new command VIRTIO_NET_CTRL_STEERING to program packet steering. Signed-off-by: Michael S. Tsirkin <mst at redhat.com> -- Changes from v2: Address Jason's comments on v2: -

At Jason's request, I am trying to help finalize the spec for the new multiqueue feature. Changes from Jason's rfc: - reserved vq 3: this makes all rx vqs even and tx vqs odd, which looks nicer to me. - documented packet steering, added a generalized steering programming command. Current modes are single queue and host driven multiqueue, but I envision support for guest driven

At Jason's request, I am trying to help finalize the spec for the new multiqueue feature. Changes from Jason's rfc: - reserved vq 3: this makes all rx vqs even and tx vqs odd, which looks nicer to me. - documented packet steering, added a generalized steering programming command. Current modes are single queue and host driven multiqueue, but I envision support for guest driven

Add multiqueue support to virtio network device. Add a new feature flag VIRTIO_NET_F_MULTIQUEUE for this feature, a +new configuration field max_virtqueue_pairs to detect supported number +of virtqueues as well as a new command VIRTIO_NET_CTRL_STEERING to +program packet steering. Signed-off-by: Michael S. Tsirkin <mst at redhat.com> Changes from v3: Address Sasha's comments - drop

Add multiqueue support to virtio network device. Add a new feature flag VIRTIO_NET_F_MULTIQUEUE for this feature, a +new configuration field max_virtqueue_pairs to detect supported number +of virtqueues as well as a new command VIRTIO_NET_CTRL_STEERING to +program packet steering. Signed-off-by: Michael S. Tsirkin <mst at redhat.com> Changes from v3: Address Sasha's comments - drop

Add multiqueue support to virtio network device. Add a new feature flag VIRTIO_NET_F_MQ for this feature, a new configuration field max_virtqueue_pairs to detect supported number of virtqueues as well as a new command VIRTIO_NET_CTRL_MQ to program packet steering for unidirectional protocols. Signed-off-by: Michael S. Tsirkin <mst at redhat.com> --- Changes in v8: - Fix value for CTRL_MQ

Add multiqueue support to virtio network device. Add a new feature flag VIRTIO_NET_F_MQ for this feature, a new configuration field max_virtqueue_pairs to detect supported number of virtqueues as well as a new command VIRTIO_NET_CTRL_MQ to program packet steering for unidirectional protocols. Signed-off-by: Michael S. Tsirkin <mst at redhat.com> --- Changes in v8: - Fix value for CTRL_MQ

Add multiqueue support to virtio network device. Add a new feature flag VIRTIO_NET_F_MQ for this feature, a new configuration field max_virtqueue_pairs to detect supported number of virtqueues as well as a new command VIRTIO_NET_CTRL_MQ to program packet steering for unidirectional protocols. Signed-off-by: Michael S. Tsirkin <mst at redhat.com> --- Changes in v7: - 8000h -> 0x8000 at

Add multiqueue support to virtio network device. Add a new feature flag VIRTIO_NET_F_MQ for this feature, a new configuration field max_virtqueue_pairs to detect supported number of virtqueues as well as a new command VIRTIO_NET_CTRL_MQ to program packet steering for unidirectional protocols. Signed-off-by: Michael S. Tsirkin <mst at redhat.com> --- Changes in v7: - 8000h -> 0x8000 at

Add RFS support to virtio network device. Add a new feature flag VIRTIO_NET_F_RFS for this feature, a new configuration field max_virtqueue_pairs to detect supported number of virtqueues as well as a new command VIRTIO_NET_CTRL_RFS to program packet steering for unidirectional protocols. --- Changes from v4: - address Jason's comments - have configuration specify the number of VQ pairs and

Add RFS support to virtio network device. Add a new feature flag VIRTIO_NET_F_RFS for this feature, a new configuration field max_virtqueue_pairs to detect supported number of virtqueues as well as a new command VIRTIO_NET_CTRL_RFS to program packet steering for unidirectional protocols. --- Changes from v4: - address Jason's comments - have configuration specify the number of VQ pairs and

Add multiqueue support to virtio network device. Add a new feature flag VIRTIO_NET_F_MQ for this feature, a new configuration field max_virtqueue_pairs to detect supported number of virtqueues as well as a new command VIRTIO_NET_CTRL_MQ to program packet steering for unidirectional protocols. --- Changes in v6: - rename RFS -> multiqueue to avoid confusion with RFS in linux mention

Add multiqueue support to virtio network device. Add a new feature flag VIRTIO_NET_F_MQ for this feature, a new configuration field max_virtqueue_pairs to detect supported number of virtqueues as well as a new command VIRTIO_NET_CTRL_MQ to program packet steering for unidirectional protocols. --- Changes in v6: - rename RFS -> multiqueue to avoid confusion with RFS in linux mention

Add RFS support to virtio network device. Add a new feature flag VIRTIO_NET_F_RFS for this feature, a new configuration field max_virtqueue_pairs to detect supported number of virtqueues as well as a new command VIRTIO_NET_CTRL_RFS to program packet steering for unidirectional protocols. Signed-off-by: Michael S. Tsirkin <mst at redhat.com> -- Changes from v3: - rename multiqueue ->

Add RFS support to virtio network device. Add a new feature flag VIRTIO_NET_F_RFS for this feature, a new configuration field max_virtqueue_pairs to detect supported number of virtqueues as well as a new command VIRTIO_NET_CTRL_RFS to program packet steering for unidirectional protocols. Signed-off-by: Michael S. Tsirkin <mst at redhat.com> -- Changes from v3: - rename multiqueue ->