similar to: Asterisk with LCR -> chan_lcr needed?

hello there, I am facing an issue with misd/misdnuser/lcr in the system I am running debian 7 and I managed to install from git misdn/misdnuser but in lcr I am getting: chan_lcr.c: In function 'load_module': chan_lcr.c:3520:24: warning: assignment makes pointer from integer without a cast [enabled by default] make[2]: *** [chan_lcr.po] Error 1 make[2]: Leaving directory

hello there. i do have debian 6 in alix 2d13 that runs asterisk 11.7. i do need to interface an ISDN line to asterisk and i bought an external isdn card usb. it is a dlink du 128ta. i have seen that i need misdn and lcr. in a clean install of debian 6.0.8 i installed through git the misdn and misdn user. unofortunatelly i am stuck with the lcr. i have installed misdn, misdnuser and LCR through git

Hi, After a few extra days of hard work, debugging, and many coffees, I am pround to announce that Asterisk::LCR has been released on CPAN. Asterisk::LCR is an open-source, Perl-based collection of tools to help you manage efficiently multiple VoIP providers with your Asterisk installation. It is capable of importing providers rates from multiple providers, comparing these rates, and

How to set-up LCR ? a. which companies can be used with LCR? b. how to set-up & maintain LCR? c. multiple connection to one gateway? Example: +886223456789 could be reachable via a. ENUM free b. Dundi free c. Voipstunt free d. Voipbuster free e. Nufone $ f. Voipstunt $ g. others with 4 concurrent connections $$ h. others with 3 concurrent connections $$ I am looking

Hi all, I am planning to implement LCR routing on my already running asterisk server. Uptill now i have found out that asterisk has no support for lcr, i have to do something about it myself, for example using the AGI. Im looking for ideas here. Whats the best way to start implementing lcr in asterisk. Should i use agi and start implementing my own lcr script or is there any plugin available which

I have got Areskicc installed with AMP and I can't stress out how good and excellent this software is. I must say the author desire every credit for this software and I would like to say Thank you to Arezqui who wrote the software. Now there is one last thing before my whole asterisk calling card become prefect. And I am wondering whether anybody may know the answer of this. I

Is there any tool that can do LCR for Asterisk but also take into account MOS scores? Is it possible to automatically generate MOS scores on random "calls" so as to keep an updated database on a per provider, per destination, per time-of-day score? Hopefully, with that information we can create a better LCR module or script? Thanks, Daniel

Hello mailinglist, I want to connect Asterisk with OpenBTS and make a call with a mobile phone. I use: Ubuntu 11.10 + Kernel 3.0.22 GnuRadio 3.3.0 Asterisk 1.8.13 OpenBTS 2.8 Nokia Mobile Phone OpenBTS works and I can send sms from the OpenBTS server to the mobile phone. What I also need is a call between Asterisk and OpenBTS. I have also two soft phones which works with Asterisk. And also

Hi. Thank you to Olle, the Wiki, and Trollphone. I found the Trollphone Rate Engine listed on the Wiki at: http://www.voip-info.org/wiki-Asterisk+addon+rate-engine I'm not familiar with LCR yet, but this is something that I need to do. I have it all installed but am not familiar with the terminology. Can someone help me maybe figure out what some of these fields are for? mysql>

Hello, How do you guys implement LCR in Asterisk? Thanks,

Hi List, I?m having problems compiling chan_misdn: asterisk:/usr/src/chan_misdn-beta-0.0.3-rc4 # make install cc -ggdb -Wall -D_GNU_SOURCE -Wno-missing-prototypes -Wno-missing-declarations -fPIC -I/usr/src/asterisk/include -DAST_CONFIG_DIR=\"/etc/asterisk/\" -I/usr/src/mISDNuser/include -I/usr/src/linux-2.6/include -I/usr/src/mISDNuser/i4lnet/ -Wall -c -o chan_misdn.o chan_misdn.c

Hi, We have a site where we'd like to move from mISDN/chan_lcr to DAHDI with a b410p card. We've tried everything we can think of to get it working but we never seem to receive any calls etc - even though the card has no alarms. We've tried replacing the card, changing the jumpers etc but no go. The cards both work with mISDN and chan_lcr, but we get reasonably frequent crashes.

Hello, I'm evaluating to possibility to use chan_misdn as a short term workaround, in case latest Dahdi is not stable enough for what we are planning to do (we wish to use Junghanns and Digium BRI hardware with Asterisk 1.6) . I've read www.mISDN.org but still have a couple of questions : 1. Is correct that in a 2.6.27 (and up) enabled kernel, the "embedded" mISDN version is

Hi, This is what I want to do: 1. Asterisk to answer calls via DID's, currently using SIPGATE 2. Provide a menu, and allow users to dial out. 3. According to the country and area they dial, the call should connect via one of up 4 carriers depending on cost. 4. If the carrier is busy it should go to the next one in line and so forth. I have tried to set this up, but it never answers the

Hello asterisk-users. I have the following dial-plan: [test] exten => 482,1,Dial(OH323/106@192.168.2.73,10) exten => 482,n,Dial(OH323/102@192.168.2.73,10) exten => 482,n,Dial(OH323/103@192.168.2.73,10) exten => 482,n,Dial(OH323/104@192.168.2.73,10) exten => 482,n,Dial(OH323/105@192.168.2.73,10) exten => 482,n,Dial(OH323/106@192.168.2.73,10) When I call exten =>

Dear All, I have two questions. 1. How can I distribute equally the outgoing calls between channels in a group? I'd like to send outgoing calls on 2 ISDN GSM adapter. I need to use the GSM subscriptions approximately equally. 2. When all of the channels are busy in the first outgoing channel group. How can I send out the call on another group? N+101 is for this problem? Regards, Repas

Hi all, Got an interesting question here. We have 2 incoming ISDN channels (linked to a local phone number that our customers call), and an account with a local IP provider. We use the ISDN for local, 13 calls - 13 is a call who's destination depends on the originating call (no point putting it through the IP provider as it will think we are calling from the wrong city and may not get

Ladies and Gents.... Please be patient as I try to explain what I am trying to achieve.. I have a PSTN line and a Freshtel account, what I want to do is have the PSTN line as the first choice for outgoing calls for local calls and Freshtel as the second choice. The problem is that it's easy enough to set up both individually but how do I get the "second choice" drop the leading

Hiyall. Just wondering how people test your emergency dialing in the UK. Obviously you need to dial the 999 for emergency services, but am a bit unsure if this would go down too well with the operator with a 'sorry just testing' call. (you do all /test/ your emergency dialing dont you!?:-) ) As another thing, what is the correct method when using least cost routing... If you have a

Hi List, I am working on least cost routing code on the moment, and I am stumbling on a problem. Say you have provider A having: Prefix XXX 0.10 Prefix XXXYYY 0.20 And provider B having Prefix XXX 0.15 You're stuck, because you cannot decide if provider B's "XXX" prefix also covers XXXYYY numbers or not. If it doesn't, it would be a waste