similar to: eth1 - Centos 6.2 - changing names of network interfaces

Dear List, I am still having difficulty installing a second ethernet card in a new CentOS 6.2 install. Tom Bishop was kind enough to give me an excellent link to figure out how to change the device names the way I need to have them. It looks to me that CentOS is recognizing the st1000spex card from StarTech but I am unable to get data to go in or out of it. The StarTech manual for this card

Hi All :) I have three servers, all with centos 7 installed 3 days ago. I need on them "old" naming scheme (ethX) for network interfaces, because of that: # grep GRUB_CMDLINE_LINUX /etc/sysconfig/grub GRUB_CMDLINE_LINUX="rd.lvm.lv=centos_node-XY/swap rd.lvm.lv=centos_node-XY/root rhgb quiet ipv6.disable=1 net.ifnames=0" net.ifnames=0 was added and afterwards I ran:

Hi there, I have two ethernet connections of 2Mbit/s each and I''m trying to add them together to one 4Mbit/s connection but I cannot get more than approximate 1Mbit/s! My setup: I have a LAN (10.2.18.0/24), connected to a larger network (10.0.0.0/8) by two WAN-connections with 2Mbit/s each. On each end I have a Linux router. I first setup the routers to use TEQL with one of the

I have a new install of CentOS 6.4 on an HP Pavilion 500-27c with one mother board nic card. results of lspci : 01:00.0 Ethernet controller: Atheros Communications Inc. AR8161 Gigabit Ethernet (rev 10) 04:00.0 Network controller: Ralink corp. Device 539b results of ifconfig -a lo Link encap:Local Loopback wlan0 Link encap:Ethernet HWaddr 70:18:8B:80:AE:71 There is no

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I have a linux system with 4 ethernet interfaces, eth0 goes to the internet, eth1, eth2, and eth3 are NAT''d LANs. I want to use an ingress filter to prioritize bandwidth (downstream from internet) to various IPs. I want to sett it up something like this.... eth0 <--[NAT]--> dummy0 <---> dummy1 <---> eth1,eth2,eth3 dummy1

Everyone, I am putting together a new mail server for our firm using a SuperMicro with Centos 7.0. When performed the install of the os, I put 16 gigs of memory in the wrong slots on the mother board which caused the SuperMicro to recognize 8 gigs instead of 16 gigs. When I installed Centos 7.0, this error made the swap file 8070 megs instead of what I would have expected to be a over 16000

ok i will do it in text: 66.92.114.46 eth0 209.141.2.194 eth1 192.168.119.101 eth2 192.168.120.101 eth3 What i have is a linux box RH7.3 which will eventually run Shorewall Firewall. On this box there is eth0 66.92.114.46 conneted to isp1 and eth1 209.141.2.194 connected to isp2 It also has eth2 192.168.119.101 and eth3 192.168.120.101 which will connect to a failover appliance which has 2 wan

Hi, I have a linux router with 4 ethernet cards; eth0 through eth3. Basically, all I want to do is route all traffic from eth2 to eth0, and all traffic from eth1 to eth3. I''ve looked through the LARTC how-to, specifically at chapter 4, about multiple providers. However, I am still a bit confused, and not sure how to set up my routing tables, as my scenario differs from the one in the

Everyone, Have any of you installed ubiguiti wireless routers on your network? It looks like the setup requires the use of software; they have some packages that are ready made for Ubuntu and Debian, but not RedHat https://www.ubnt.com/download/unifi/unifi-ap-ac-pro Have any of you tried or succeeded in installation this on Centos 7.4? Greg Ennis

I have a setup with two Internet providers. One circuit (net0 == eth1) is used primarily for employees and tunnels to other sites. The other (net1 == eth2) is for the production machines that customers access. Everythung works in teh sense that packets get to where they are sent (mostly) but I recently I had a sniffer on the system and noticed a problem I cannot solve. traffic coming in

Thanks for your help. I did pick up an additional entry in the audit file : type=AVC msg=audit(1504561395.709:10196): avc: denied { execute } for pid=19163 comm="/usr/sbin/httpd" name="s.check.cgi" dev="dm-0" ino=537182029 scontext=system_u:system_r:httpd_t:s0 tcontext=unconfined_u:object_r:httpd_sys_content_t:s0 tclass=file Unfortunately, I am not sure how the

Dear All, Sorry to trouble again..... After go through www.lartc.org I have implemented the HTB instead of CBQ for the same scenario. Now following files are under /etc/sysconfig/htb directory. eth0 DEFAULT=30 R2Q=10 eth0-2.root RATE=256kbps BURST=25k eth0-2:10.comp1 RATE=120kbps BURST=12k PRIO=0 LEAF=sfq RULE=192.168.200.0/24 eth0-2:20.comp2

Hi! I have read all informations i could find, but some things are still not clear. My setup is: ---INTERNET1(eth0)-\ /- Local net1 (eth2) GW ---INTERNET2(eth1)-/ \- Local net2 (eth3) I have NAT and a working setup using HTB,SFQ, classifying with the iptables -j CLASSIFY way. I shape only the traffic coming from the internet heading to the intranet. I would like

Hi, I have a little problem to setup iproute in my network It looks like this: ---- ----- ------ R1 R2 R3 ---- ----- ------ | | | | | | ------------------------------- ETH1 ETH2 ETH3 ETH0 ETH4 -------------> DMZ ------------------------------ | |

Everyone, I am trying to set up a second internal network (192.168.0.0/24) and have not been able to get dhcp to start when I have the following in my dhcpd.conf file : subnet 192.168.0.0 netmask 255.255.255.0 { range 192.168.0.110 192.168.0.130; option subnet-mask 255.255.255.0; option broadcast-address 192.168.0.255; option routers 192.168.0.1; option

Hi, Apologies for the cross-posting; I''m not sure whether this is a firewall or routing issue, or both! I have four network cards, detailed below. eth0 and eth3 connect to my ISPs, and eth1 and eth2 connect to local networks. I want to route all traffic from eth2 to eth0, and from eth1 to eth3. However, I am having a few problems with this. eth0 ip: 192.168.100.253/24 gw:

What changes would I need to make if there is a 4th interface that is going to a DMZ Thanks Gene

Hi, I have a simple question (well, at least I think it''s simple!). I have a router, with four Ethernet cards; eth0-eth3. eth0 and eth3 are the ''external'' cards, connecting to my ISPs. eth1 and eth2 are connected to my internal networks. What I want to do is basically filter all the traffic from one card to another, in this configuration: eth1 to eth3 eth2 to eth0

Everyone, about 4 years ago, I tried to install CentOS 6 on a Supermicro server with SCSI drives using a LSI raid system. I could never figure out or find a way to make the installation disc of Centos 6 identify the SCSI drives. The installation disc for Centos 5 identified the SCSI drives without a problem. I finally gave up on Centos 6 and installed Centos 5 and the system has worked very

Am 13.05.2018 um 18:00 schrieb Gregory P. Ennis <PoMec at PoMec.Net>: > > I have started the process of trying to replace our templates with a > new font. 'Liberation mono' is a close match, but for some reason I > don't like the way it looks when the whole page of type is scanned all > together. Try to convert the type1 fonts into a truetype container (using