similar to: Has anyone used a Dell with a PERC H310?

Hello Sa?o! I found you here: http://mail.opensolaris.org/pipermail/zfs-discuss/2012-May/051546.html "How about reflashing LSI firmware to the card? I read on Dell''s spec sheets that the card runs an LSISAS2008 chip, so chances are that standard LSI firmware will work on it. I can send you all the required bits to do the reflash, if you like." I got Dell Perc H310 controller

As a napp-it user who recently needs to upgrade from NexentaCore I recently saw "preferred for OpenIndiana live but running under Illumian, NexentaCore and Solaris 11 (Express)" as a system recommendation for napp-it. I wonder about the future of OpenIndiana and Illumian, which fork is likely to see the most continued development, in your opinion? Thanks.

The subject says it all.

All, I am curious what is used typically for the file system replication and how do you make sure that it is consistent. So for example when using large 3TB+ sata/NL-sas drives. Is is typical to replicate three times to get similar protection to raid 6? Also what is typically done to ensure that all replicas are in place and consistent? A cron that stats of ls's the file system from a

Happy Friday, List! I''m spec''ing out a Thumper-esque solution and having trouble finding my favorite Hitachi Ultrastar 2TB drives at a reasonable post-flood price. The Seagate Constellations seem pretty reasonable given the market circumstances but I don''t have any experience with them. Anybody using these in their ZFS systems and have you had good luck? Also, if

Hi All, I''d like to ask about whether there is a method to enforce a certain txg commit frequency on ZFS. I''m doing a large amount of video streaming from a storage pool while also slowly continuously writing a constant volume of data to it (using a normal file descriptor, *not* in O_SYNC). When reading volume goes over a certain threshold (and average pool load over ~50%), ZFS

Hi all ! Thanks for the very good support of Dell R320 hardware, perc H310 is well supported, BCM5720 seems to work correctly and performances are great. The only problem i have found is very strange. The FreeBSD bootloader take many times to load, 30sec-2minutes to boot the kernel and show the bootloader menu. After that, the system boots properly, at a normal speed. Is there any issue or

Hello, Has anyone out there been able to qualify the Proliant DL360 G7 for your Solaris/OI/Nexenta environments? Any pros/cons/gotchas (vs. previous generation HP servers) would be greatly appreciated. Thanks in advance! -Anh

Has anyone worked with either the Hitachi or Seagate Compact flash drives in an IDE to CF interface and set the up with EXT3 formatted partitions for use with LVM? I ASSuME that LVM is not for FAT32 formatted drives.

Hi, this server, a Dell R720 has 4 bge on board, Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000 bge0: APE FW version: NCSI v1.1.7.0 bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E miibus0: <MII bus> on bge0 ... I have connected the ethernet to port labeled 0, but it appears as bge2, how can this be corrected? thanks, danny

Here is info. about the Raid controllers. Doesn't seem to be the culprit. Slow host: Name PERC H710 Mini (Embedded) Firmware Version 21.3.4-0001 Cache Memory Size 512 MB Fast Host: Name PERC H310 Mini (Embedded) Firmware Version 20.12.1-0002 Cache Memory Size 0 MB Slow host: Name PERC H310 Mini (Embedded) Firmware Version 20.13.1-0002 Cache Memory Size 0 MB Slow host: Name PERC H310 Mini

So I have this dual 16-core Opteron Dell R715 with 128G of RAM attached to a SuperMicro disk enclosure with 45 2TB Toshiba SAS drives (via two LSI 9200 controllers and MPxIO) running OpenIndiana 151a4 and I''m occasionally seeing a storm of xcalls on one of the 32 VCPUs (>100000 xcalls a second). The machine is pretty much idle, only receiving a bunch of multicast video streams and

Package: xen-hypervisor-4.4-amd64 Version: 4.4.1-9 Severity: grave Justification: renders package unusable Hi, I was running Debian Wheezy (amd64) and xen-hypervisor 4.1 on a Dell PowerEdge R720. Xen was working fine. Xen was configured with LVM Now, I'm trying Debian Jessie (amd64) and I have a strange problem. After booting, Xen seems to be working : /etc/init.d/xen status ? xen.service

Hi, I am planning to install CentOS 6.4 on Dell R720 which has hardware raid card and 6 hard disk slots available. I have planned with the below set up :- *2 Hard disks configured in RAID 1 for installing OS * *4 Hard disks configured in RAID 10 for data drive.* Please suggest and recommend if the above approach is correct and let me know if i am missing anything which is crucial to set up a

Hi, I have HT Feature available on my Dell Server R720. Please help me understand if HT is enabled on the server, will there be a performance impact. What are the deciding factors to enable HT on the servers. Regards Kaushal

Hello, I'm curiuos if anyone knows if it's possible to set up a Dell R515 (which has PERC H700) to be JBOD. It seems the only options are RAID0 or RAID1. I read posts, where people say it can by done by making each disk its own RAID0.? This works, but it wigs out when that disk is removed, and forgets a disk was ever there (unless I go back in the PERC and fix it). My plan is to have a

Hi. Is the problem with ZFS supporting 4k sectors or is the problem mixing 512 byte and 4k sector disks in one pool, or something else? I have seen alot of discussion on the 4k issue but I haven''t understood what the actual problem ZFS has with 4k sectors is. It''s getting harder and harder to find large disks with 512 byte sectors so what should we do? TIA...

What is your gluster setup? Please share volume details where vms ate stored. It could be that the slow host is having arbiter volume. Alex On Feb 26, 2018 13:46, "Ryan Wilkinson" <ryanwilk at gmail.com> wrote: > Here is info. about the Raid controllers. Doesn't seem to be the culprit. > > Slow host: > Name PERC H710 Mini (Embedded) > Firmware Version

Hi, I have updated the firmware for perc raid controller card, network card, IDRAC firmware and the BIOS version on Dell R720 server. I have installed CentOS 6.4 and updated with all the latest packages using yum -y update. # cat /var/log/messages | grep -i error Sep 23 14:09:35 x24 kernel: ERST: Error Record Serialization Table (ERST) support is initialized. Sep 23 14:09:35 x24 kernel: ACPI

All volumes are configured as replica 3. I have no arbiter volumes. Storage hosts are for storage only and Virt hosts are dedicated Virt hosts. I've checked throughput from the Virt hosts to all 3 gluster hosts and am getting ~9Gb/s. On Tue, Feb 27, 2018 at 1:33 AM, Alex K <rightkicktech at gmail.com> wrote: > What is your gluster setup? Please share volume details where vms ate