similar to: Tyan K8WE BIOS v1.03 and -STABLE

Hi folks, an Asterisk (www.asterisk.org) box will be built with the following specs and I wanted to know if CENTOS has a built process/config/parameter/special distro to target the AMD Opteron Dual Core plataform: 2 amd opteron 265 dual core 1.8 Ghz 2mb l2 cache 2x1024 ocz c2-6400 dual channel gold GX XTC 2 Seagate 16mb cache 300 GB barracuda 7200 drives another 2 Seagate 500 GB 16mb cache

Good day. Thanks in advance for any help. I have a Tyan S2895 (Thunder K8WE) with 2 275 Opterons and the latest (1.02) bios. It appears to have an nVidia nForce SATA chipset which connects to a 250gb WD Caviar SATA drive. Using the CentOS 4 update 2 x86_64 DVD, the install is peachy until half-way through the "performing post install configuration" bit. Then it hangs forever. I

I am trying to install CentOS to a server that has a Tyan S2891 motherboard, 2 Opteron 875 Dual Cores and 2GB of RAM. I have been able trying to install over a network but the tg3 driver will not load. I then installed from a DVD and on rebooting after the installation I cannot get the network drivers to load and the RAID controller in the PCI slot is not available. It seems that when I do an

Folks- I have had a machine dropped in my lap that I am trying to get CentOS 4.1 to run on as a first pass (the hope is for it to eventually run Rocks -- http://www.rocksclusters.org , which uses CentOS 4.x as its underlying OS). The machine has 2 Opteron 250DP (2.4GHz) with 4 GB of RAM. It is using a Tyan Thunder K8WE (S2895A2NRF) motherboard with an nVidia nForce chipset --

Dear Friends, I am trying to install a few packages in R and am receiving error messages. Since the error messages are different, I am posting them separately. The second error is with the installation of lpSolve. The core error message is: ======================================================================== In file included from /usr/include/bits/posix1_lim.h:153, from

My setup is as follows: Motherboard: Tyan S2895 CPU: Two Opteron 275s Memory: 4 GB Disk: Three 250 GB SATA drives attached to a 3Ware 9500S-4LP RAID card Video: Nvidia GeForce 7800 The only hardware that I have added to the motherboard is the 3Ware card and the Nvidia card. The disks are configured as a RAID 5 array, and the machine boots from this array. I installed CentOS 4.2 x86 on this

I've been checking out this and like the looks of it. http://www.tyan.com/products/html/gt24b2891.html I was told the onboard SATA RAID controller can only be used by windows. However, others have told me that there is no problem using it with linux. Anyone used the Tyan Transport GT24 (TYAN Thunder K8SRE s2891 motherboard)? Good choice for a CentOS server? Thanks, Josh

Has anyone installed Linux (CentOS or other) on a Tyan K8SE (S2892) motherboard? I'd really like to hear your experiences -- with this board or Nvidia's nForce Pro chipset in general. I'm looking to build a new server using this board but would like to find some other experiences first. I've googled myself blue but haven't found any reviews or postings regarding this

So, with the updated HAL, I'm now able to negotiate an IP address via DHCP over the WLAN. Huzzah! But I've got two questions (now that I can use the card): ath(4) doesn't contain a list of media nor mediaopt settings that can be used. Some are detailed down in EXAMPLES, but there's no comprehensive list. (As well, and this is minor, the speeds are explicitly listed for 802.11a

Hi, I am using syslinux-3.85 (and before till 3.72) and I have seen a peculiar problem on a couple of machines that I have in my lab. The problem is that if the machine boots onto PXE, and then does a "LOCALBOOT 0", the networking component of the OS stops working !!! If I skip PXE boot, and just let the OS boot, the OS's networking is working fine. The problem is seen of all the

It seems that unstable PowerNow support on the Tyan S2895 is not limited to Linux according to this review: http://www.hardcoreware.net/reviews/review-296-1.htm Their solution was to upgrade the BIOS as well. -- Bryan J. Smith b.j.smith at ieee.org http://thebs413.blogspot.com ---------------------------------------------------------------------- The best things in life are NOT

Hi Everyone, My server is only seeing 4.8 GB out of 6 GB available. I don't know why. I have a CentOS 4.4 x86_64 server running on a Tyan s2895 with 6 GB of RAM (two 1 GB sticks and 2 2 GB sticks). I upgraded the RAM, powered up the server, and when CentOS was finished booting, checked the available RAM with free. This is what it's reporting: total used

How do install farcry2 + the patch? I can't find the install for the patch. How good is the fps? 30fps+ Thanks.

Version 1.03 of the R package boolean has been uploaded to CRAN and is now available. boolean implements partial-observability logit and probit models for testing Boolean hypotheses. It permits researchers to model the probability of the occurrence of a given outcome as a complex function of the probabilities that other outcomes will occur (or other conditions will be fulfilled). For

Version 1.03 of the R package boolean has been uploaded to CRAN and is now available. boolean implements partial-observability logit and probit models for testing Boolean hypotheses. It permits researchers to model the probability of the occurrence of a given outcome as a complex function of the probabilities that other outcomes will occur (or other conditions will be fulfilled). For

From: "Bryan J. Smith <b.j.smith at ieee.org>" <thebs413 at earthlink.net> > I wrote a pre-sale evaluation back in January 2005 here: > http://lists.leap-cf.org/pipermail/leaplist/2005-January/000532.html > ... Tyan S2895 -- nForce Pro 2200+2050 Just know that the pre-sale evaluation was of the nForce4, and didn't take the nForce Pro 2200 and 2200+2050

Hello, I'm using fArma package to estimate the value of Hurst exponent using R/S method. However, for a certain set of data I get H ~ 1.8. How do I interpret this? Following are the output that I get for this set: > mean(data[,2]) [1] 400.5433 > sd(data[,2]) [1] 1139.786 > > rsFit(data[,2], levels = 64) Title: Hurst Exponent from R/S Method Call: rsFit(x = data[, 2], levels

Dear All, I am a novice when it comes to time-series analysis and at the moment I am actually interested in calculating the Hurst exponent of a time series. This question has already been asked quite some time ago http://bit.ly/98dZsi and I trust some progress has been made ever since. I was able to find some functions in the packages http://cran.r-project.org/web/packages/Rwave/index.html

Hi, Can u please tell me which all packages do i need to install to estimate the hurst parameter in R. I have tried installing all the possible options but still it doesnt work. basically i want to use 9 functions to estimate hurst parameter like aggvarfit, rsfit, etc. i will be very thankful if u could be of some help. -- Regards, Deepak Jadhav. [[alternative HTML version

hi all, I have a simple question that does power spectral analysis related to capacity dimension, information dimension, lyapunov exponent, hurst exponent. If yes then please show me the way. I am newbie in the world of chaos. Sayonara With Smile & With Warm Regards :-) G a u r a v Y a d a v Senior Executive Officer, Economic Research & Surveillance Department, Clearing