similar to: EHCI device

Hi Folks, I've facing an intermittent hang with a USB port which seems cam related: Event's that happen are: o USB modem (HUAWEI E220) plugged into PC ugen3.2: <HUA WEI> at usbus3 u3g0: <3G Modem> on usbus3 u3g0: Found 3 ports. umass0: <USB MASS STORAGE> on usbus3 umass0: SCSI over Bulk-Only; quirks = 0x0000 umass0:6:0:-1: Attached to scbus6 umass1: <USB

I have a new system which includes a Plextor PX-740a DVD+-R/RW CD-R/RW drive attached to an Asus A8V-MX motherboard. When I try to use burncd to burn a cd, it writes all of the data, says "fixating CD, please wait.." and then reports burncd: ioctl(CDRIOCFIXATE): Input/output error Oddly enough, the CD seems to be usable. I can successfully burn the same file if I use cdrecord. The

hail, I partitioned the disk this way: fdisk da0 ******* Working on device /dev/da0 ******* parameters extracted from in-core disklabel are: cylinders=12161 heads=255 sectors/track=63 (16065 blks/cyl) Figures below won't work with BIOS for partitions not in cyl 1 parameters to be used for BIOS calculations are: cylinders=12161 heads=255 sectors/track=63 (16065 blks/cyl) Media sector size

I've been deploying FreeBSD 9 without issue on a number of near-identical servers for a client, but have run into an interesting annoyance when I hit the two DB servers. These DB servers have an LSI 3ware 9750-8i (running a 6 disk RAID 10 in a single 3TB virtual volume) which puts them apart from the other two servers in this cluster (which don't show either issue I am about to

Hi. On one of my fresh installed servers I am seeing the following output during boot: gptzfsboot: error 4 lba 30 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 30 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot:

A problem with 4.8 reported by myself and Aaron D. Gifford. Anyone in -stable who knows more? ******** I'm assembling a Compaq 1850R with attached storage system. For the built in scsi controller (sym), there are three drives internally on channel 1 + 5 drives externally on channel 2. During boot, I can see all disks being identified first by the machine itself and then in the early part

Hi, I am trying to get FreeBSD 4.7 to connect to a Maxtor 5000XT drive, but I get the following when connecting it -> Apr 26 09:19:43 chowder /kernel: fwohci0: node_id = 0xc000ffc1, CYCLEMASTER mode Apr 26 09:19:43 chowder /kernel: firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me) Apr 26 09:19:50 chowder /kernel: fwohci0: BUS reset Apr 26 09:19:50 chowder /kernel: fwohci0: node_id =

Three different external hard drives (Seagate, Western Digital and noname USB 3.0 enclosure) refused to be recognized as the umass devices. Reverting /usr/src/sys/dev/bsd/controller to r248085, building and loading just xhci module makes drives appear again. Below are snippets from the log in both cases: Non working: Jul 4 14:35:17 twinhead kernel: xhci0: <XHCI (generic) USB 3.0

Hi! Just before we start, this is not the "USB hang on boot" problem. OK? This post got rather long, so I'll summaries it all in a sentence here: With FreeBSD 4.9-rc on an ASUS A7N8X with a cheapo memory stick, simply plugging it in and taking it out a couple of times is a guaranteed panic. I use only one USB device, a cheapo USB memory stick, which I recently bought on a

Hi, I had a power failure, and the on-disk configuration for vinum went bizarre. The logs read from disks are at http://biaix.org/pk/debug/ (log.$DEVICE files). The logs in da0 (barracuda) are the ones obviously wrong, I'm pretty sure the others are ok. Is this a 'virtually' dead drive? Can I force vinum to use the other's drive configuration? What's the less traumatic

My new PC has an internal 16-in-1 card reader connected via USB 2.0. The device is the Techsolo TCR-1640 (http://www.techsolo.de/product/cardreader/tcr_1640/index.php). I boot from a compact flash inserted in it and I can mount and unmount the same CF once the system has booted and has mounted the root partition from my graid3 array. The problem arise when I replace the inserted CF with another

Hello all. I have a supermicro 16 bay box with a LSI 9211-8i card. We use it for temp data storage, and we wanted to try the l4z compression. After updating the source tree to r247839: and doing a make buildworld cycle all works fine. But at boot time we get some warnings. make_dev_physpath_alias: WARNING - Unable to alias gptid/281951f4-a996-11e1-83eb-00259061b51a to enc at

I've got a new supermicro server I'm trying to get FreeBSD on. It uses the Intel c602 chipset, and it's my understanding that support for that chipset (c60X) was recently added via the isci driver. Ok, great, that explains why 8.2-R and 9.0-R didn't see the drives. So, I grabbed the memstick image of 8.3-RELEASE that is on the ftp server, booted it up, and sure enough, as the

Hi all, I have some problems with my gvinum setup after the system panic'ed. Afterwards the system fails finding the plexes to the subdisks (or at least that is what I can understand after having searched the gvinum source code for the error string in the DMESG log..) The machine is an IBM Netfinity 5000 and the internal HW self tests does not find any errors in the hw. Luckily my root is

I recently put together a new machine w/ a SuperMicro H8SCM and an AMD Opteron 4228 HE... I've having an issue where the clock on the machine skips around... The wierd part is that it's very sudden when it happens... ntp sometimes brings it back, but it can't when the clock gets too far ahread (1000 seconds), ntp dies... In order to catch it happening, I ran a sleep 60 loop

I am trying to get esata working. my lspci is below. When I plug in the disk an turn it on - dmesg reports nothing. Is it supposed to report anything like a usb disk does? Is there a module to load? My motherboard is GA-MA78GM-US2H. Jerry --------- 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge 00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge

I purchased the 256 MB A-DATA flash drive (USB 2.0 SpeedDrive), but the system can't query its size. Here is corresponding parts of system messages (boot -v): >>>>>>>>>>> Aug 5 12:53:57 goshik /kernel: Copyright (c) 1992-2003 The FreeBSD Project. Aug 5 12:53:57 goshik /kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 Aug 5

Hi, Can someone please help me with this? I have just upgraded from 4.7 to 4.8-STABLE and this is what I am getting when I try a tape backup. Please CC as I am not in the list. It was working well before the upgrade (dump -0ua -f - / | gzip -c -9 | dd of=/dev/nsa0). Thank you, Lefteris Tsintjelis Jul 3 22:55:18 ene /kernel:

Hi. If I create a zpool with the following command: zpool create tank raidz2 da0 da1 da2 da3 da4 da5 da6 da7 and after a reboot the device names for some reason are changed so da2 and da5 are swapped, either by altering the LUN setting on the storage or by switching cables/swapping disks etc.? How will zfs handle that? Will it simply acknowledge that all devices are present and the pool is

hi all, I am trying to get lm_sensors to work. did the yum install lm_sensors service lm_sensors start sensor -s and it says no sensors found. did lsmod | grep it87 and it87 57061 0 hwmon_vid 35905 1 it87 hwmon 36553 1 it87 i2c_isa 39105 1 it87 i2c_core 56129 5 it87,i2c_isa,i2c_dev,i2c_ec,i2c_piix4 Seems like