similar to: Upgrade to 4.8 STABLE - Root mount failed: 6

I have some questions about what needs tuned on a high traffic syslog box. I seem to be dropping quite a few syslog packets. This is a syslog server for a high usage Firewall btw. Nic is a Compaq tl0 4.8-P13 netstat -s -p udp | grep buf 19,762,079 dropped due to full socket buffers uptime 5:28PM up 7 days, 18:30, 2 users, load averages: 0.21, 0.23, 0.23 I though maybe syslogd was the

I've just had a 4.9p1 system partially deadlock for about 30 minutes and then spontaneously(?) recover. The "ps" results point at vinum. I've never seen this before and don't recall anything like this being mentioned here before. At the time, I had two find's running in a large NFS mounted filesystem and was doing a "cvs -d /usr/ncvs -R checkout -P ports" from

Hello, My server is experiencing occasional kernel panics when under moderate load. I'm attaching a crash dump and the dmesg output. I'm not sure how to read the kernel backtrace but it looks like the Intel NIC (em0) caused the problem. Occasionally, I used to get a "em0: watchdog timeout -- resetting" error message, but I never had a kernel panic. The problem started last

Hi, I have some problems with usb da and uscanner giving me I/O-errors. This is on a ASRock K7VT2 board. If there is anything else I could do (testing patches, providing further info), please let me know. 4.8-STABLE from 04.08.2003: - MBO USB-MultiCardReader 6-in-1 mount_msdos => Input/output error - Epson Perfection 1260 Scanner scanimage --test => Error during device I/O

Hi, We did an upgrade of one of our machines from an Aug 25 CVS and ever since then one of the machines likes to reboot about once a day. The machine is the following: IBM x340 2x1GHZ Processors 1GB RAM 3x36GB Drives (RAID 5) Mylex ExtreRAID 352 In the panic it mentions httpd, but I don't *think* it's apache (1.3.27) that's causing the problem, or am I wrong? I also believe it is

Hi I have a quad processor Compaq Proliant 5500. The output from dmesg seems strange (I have also sent a copy to freebsd-smp to ask about smp issues) and there are also some performance issues which I suspect are smp related. Could anyone who fels so inclined please take a look at the output and let me have any comments. Thanks _______________________________ Copyright (c) 1992-2002 The

I am getting these messages every 30 seconds or so. I searched around and found a few other post about this problem with other devices, but no answers to the problem. I didn't notice any of these message until I upgrade to 4.8-RELEASE the other day. This is a dual processor machine. It happens on all my machines that have em devices, which all happen to be dual processor machines. I

Hi, Can someone please help me with this? I have just upgraded from 4.7 to 4.8-STABLE and this is what I am getting when I try a tape backup. Please CC as I am not in the list. It was working well before the upgrade (dump -0ua -f - / | gzip -c -9 | dd of=/dev/nsa0). Thank you, Lefteris Tsintjelis Jul 3 22:55:18 ene /kernel:

I put this to the smp list and to stable but have had no takers from wither. nThere are both smp and other system issues and I am just wondering if anyoe would be willing to take a look at this output from dmesg and let me have some advice Thanks david ----- Original Message ----- From: "vizion communication" <vizion@ixpres.com> To: <freebsd-smp@freebsd.org> Sent:

Dear Sirs. It seems to me a never ending story. We run a box with a TYAN Thunder 2500 Dual SMP mainboard, 2GB ECC Tyan certified memory, AMI Enterprise 1600 RAID adapter and additional Intel 1000/Pro server type (64 bit) GBit LAN NIC. With FreeBSD 4.8 this was stable, but to achive this state was really hard! It is a story similar to that what happend when we changed towards FreeBSD

Hi! Just before we start, this is not the "USB hang on boot" problem. OK? This post got rather long, so I'll summaries it all in a sentence here: With FreeBSD 4.9-rc on an ASUS A7N8X with a cheapo memory stick, simply plugging it in and taking it out a couple of times is a guaranteed panic. I use only one USB device, a cheapo USB memory stick, which I recently bought on a

I'm trying to get stable booted on a little ITX board off of a CF card, but it hangs as it's trying to run init. Here's what the boot looks like. SMAP type=01 base=0000000000000000 len=000000000009fc00 SMAP type=01 base=000000000009fc00 len=0000000000000400 SMAP type=02 base=00000000000f0000 len=0000000000010000 SMAP type=02 base=00000000ffff0000 len=0000000000010000 SMAP type=01

Graham Bentley wrote: > Recently swapped out my Sony for a HP DAT and > got this first time in dmesg > > (sa0:ahc0:0:6:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 0 0 0 0 0 > (sa0:ahc0:0:6:0): CAM Status: SCSI Status Error > (sa0:ahc0:0:6:0): SCSI Status: Check Condition > (sa0:ahc0:0:6:0): UNIT ATTENTION asc:28,0 > (sa0:ahc0:0:6:0): Not ready to ready change, medium may

Hi, After kernel panic I couldn't get gdb work properly. msi$ uname -sr FreeBSD 4.7-RELEASE msi$ gdb -k /usr/src/sys/compile/MSINW/kernel.debug vmcore.0 GNU gdb 4.18 (FreeBSD) Copyright 1998 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show

Hi, We have a pretty serious problem with our news server crashing during the expire cronjob. This happened with 4.7-RELEASE, so we upgraded to 4.8-RELEASE recently, hoping that the problem might be fixed, but it isn't. The machine is a Compaq DL360-G2. I've searched the PR database as well as the mailing list archives for the panic string, but didn't find anything. What makes the

Hello, I have the following hardware configuration. Tyan 2466N motherboard, 1.03 BIOS, 2 Athlon-MP 1800+ CPUs, 512MB registered ECC DRAM, Onboard 3Com NIC (xl type) Radeon 8500 AGP video card Adaptec 3210S SCSI RAID controller Comtrol RocketPort 8 port PCI serial card I have started to experience some odd system lockups in the past couple months, and it seems to be getting worse. I particular,

All: I cvsup'ed earlier this evening and am still able to reproduce this panic at will. Command line, panic backtrace, dmesg, ldd output, and mplayer version follow. If more information is needed, just let me know. % mplayer foo.mov [a quicktime file] [plays for awhile, and then panics] # gdb -k -s /usr/obj/usr/src/sys/LICHEN/kernel.debug -e /var/crash/kernel.2 -c /var/crash/vmcore.2

Hi, I had 6 crash in 3 hours with exactly the same messages is my aac controler dead ? aac0: COMMAND 0xc4c9d900 TIMEOUT AFTER 512 SECONDS aac0: WARNING! Controller is no longer running! code= 0x100 Fatal trap 12: page fault while in kernel mode cpuid = 0; apic id = 01 fault virtual address = 0x5a fault code = supervisor read, page not present instruction pointer =

FreeBSD 4.1.1-RELEASE #1: Tue Oct 10 18:09:51 CDT 2000 root@test-drive.tamu.edu:/usr/src/sys/compile/TEST-DRIVE Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (501.14-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CM

Hello Everyone, I started seeing some ata errors on a server running FreeBSD 5.4-STABLE that I've never seen before. This probably has something to do with it but we just upgraded the RAM on the server from 1 GB to 2 GB (DDR 400), perhaps a cable got slightly loose. I'm pretty certain the hard drives are good since the server ran fine prior to the memory upgrade. What do the errors below