similar to: USB Problem

-- Previously Posted to FreeBSD-questions Update: I've changed the RAM in the machine. That seemed to fix the problem for a little bit, but the problem has started occuring again. Also, I'm not subscribed to the list, so please reply to this message directly. Thanks for all your help. -- Hello, Recently, I've been having kernel panics on 4.8RC. This made me upgrade to

Hello, I am attempting to get by broadcom wifi card up and running, am sick of trying to get ndis working, and am attempting to use the bwi driver (originating in dragonflyBSD). I'm hoping others here have tried to do the same and have some pointers. I'm using 7.1-RELEASE (system/source are in-sync) and my card is a BCM94306MP. My dmesg is posted below. Bwi(4) is installed and it

Could people who are experiencing boot-time hangs in 4.9-PRERELEASE try the following patch to see if it helps? I've had one positive report so far, but it would be helpful to get more feedback to determine if this is the right fix to be committed. The problem was that interrupts were getting unmasked too early in the boot process, causing an interrupt storm that usually occurred while USB

If you start to experience problems with ata devices, please direct your report this way. Thanks -lq

Hi, I have a server (Dell PowerEdge SC1435, ServerWorks HT1000) on which I'd like to try installing FreeBSD. I've already failed to make 7.0 work on this box and was wondering if you have information about the behavior of the upcoming 7.1 on this hardware. I've been following the "HT1000 chipset errata saga" thread, and the commits by sos@ to CVS (around Jan 2008), but have

I had a sparc64 (Netra X1) running a stable/9 from late March 2013. Actually, the kernel may've been a bit newer than that as I was working with folks to diagnose and repair some Netra-X1 specific issues. But, ZFS worked fine. I have two pools, zroot as a RAID1 (using equally sized partitions at the front of two large disks), and a zdata that is a large pool of the remaining space of both

Hi, I am using the db backend for the expire plugin and found the following error message in the logfile: dovecot: Jan 22 10:10:55 Error: dict: secondary db: unable to allocate space from the buffer cache dovecot: Jan 22 10:10:55 Error: dict: Failed to initialize dictionary 'expire' dovecot: Jan 22 10:10:55 Error: IMAP(xxxxxxxxxx): read(/var/dovecot/dict-server) failed: Remote

Hi, I am getting the following error: dovecot: Jul 23 18:04:44 Error: child 7600 (imap) killed with signal 10 How to reproduce: Try to delete or move a mail to another folder. The mail actually gets copied to the other folder but the original isn't removed (when using webmail). If using thunderbird this ends up in an infinite loop creating new mails in the destination folder (without

Hello all. I have a supermicro 16 bay box with a LSI 9211-8i card. We use it for temp data storage, and we wanted to try the l4z compression. After updating the source tree to r247839: and doing a make buildworld cycle all works fine. But at boot time we get some warnings. make_dev_physpath_alias: WARNING - Unable to alias gptid/281951f4-a996-11e1-83eb-00259061b51a to enc at

I am having problems with mouse, keyboard and APC UPS. When attempting to start apcupsd I get the following error: Jan 8 17:42:06 Ace apcupsd[1606]: apcupsd FATAL ERROR in generic-usb.c at line 636 Cannot find UPS device -- For a link to detailed USB trouble shooting information, please see <http://www.apcupsd.com/support.html>. Jan 8 17:42:06 Ace apcupsd[1606]: apcupsd error shutdown

I would also like to help as well. As KMacy knows before i asked a lot of questions for T2 types of servers but unfortunately i have no more access to those kind of hardware as well. I;m willing to participate if a team will be formated.

I have a new system which includes a Plextor PX-740a DVD+-R/RW CD-R/RW drive attached to an Asus A8V-MX motherboard. When I try to use burncd to burn a cd, it writes all of the data, says "fixating CD, please wait.." and then reports burncd: ioctl(CDRIOCFIXATE): Input/output error Oddly enough, the CD seems to be usable. I can successfully burn the same file if I use cdrecord. The

I am installing dahdi on a machine lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge 00:01.0 PCI bridge: Hewlett-Packard Company Unknown device 9602 00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0) 00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) 00:06.0 PCI bridge: Advanced Micro Devices [AMD]

I just updated to RELENG_7 from 6.2 and I'm running into some really annoying issues with jerky mouse movement and skipping sound. This seems to be similar to: Re: SCHED_4BSD in RELENG_7 disturbs workflow This happens both with 4BSD and ULE. I seems to happen when I'm compiling ports and a new cc/bzip2/sh process fires off (I'm just watching top), I'll get the skip/freezeup.

Hi, FreeBSD-9 works fine on this Lenovo T400 - except that suspending with no USB devices plugged in result in no ports working after resume. If I have a device plugged in during suspend - on any port - then all the ports work fine after resume. I've attached usbconfig and acpidump output. here's what is logged in the kernel buffer during suspend and resume: Her'es the suspend:

Hello, I'm looking for help figuring out why I am having problems with shutting down a machine. I have tested the machine using Fedora 19 and Ubuntu 12 Live CD's and both power down without issues. I added acpi.debug_level=1 to the grub boot as it was suggested to see more info about ACPI in the logs I found the following ACPI Errors in the /var/log/messages Oct 11

I''ve been trying to install a 2.6.37-12 kernel from kernel-ppa on one of my Ubuntu machines without success. It keeps giving errors like this: [ 9.115544] ata9: exception Emask 0x0 SAct 0xf SErr 0x0 action 0x10 frozen [ 9.115550] ata9.00: failed command: READ FPDMA QUEUED [ 9.115556] ata9.00: cmd 60/04:00: d4:82:85/00:00:1f:00:00/40 tag 0 ncq 2048 in [ 9.115557]

Thanks for you reply. I have installed asciidoc with "pkg_add asciidoc" And it returns something: # asciidoc fgh asciidoc: FAILED: input file /root/nut/fgh missing # which asciidoc /usr/local/bin/asciidoc Maybe there is any way to skip building man pages. This is not the such main thing as a new devices support. I also could built the driver that I need # make riello_ser but I don't

Hello, I am having a problem with a new server running FreeBSD 4.9-PRERELEASE. Once every two days or so, it reboots itself.. there is no exact time of the day it reboots.. It rebooted itself at 4:25 PM EDT on 9/25, and 3:05 AM EDT on 9/29 (today). I thought it's the bad memory or some sort, so I've been running memtest today and memtest reports no sign of trouble with the memory...

I purchased the 256 MB A-DATA flash drive (USB 2.0 SpeedDrive), but the system can't query its size. Here is corresponding parts of system messages (boot -v): >>>>>>>>>>> Aug 5 12:53:57 goshik /kernel: Copyright (c) 1992-2003 The FreeBSD Project. Aug 5 12:53:57 goshik /kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 Aug 5