similar to: Intel 875P/ICH5 motherboard chipset

During the last two weeks there has been some discussion in freebsd-questions and freebsd-stable about the prospects of FreeBSD support for some motherboard devices associated with the Intel 865PE/875P and ICH5/ICH5R support chips now showing up in recent motherboard designs. The 865PE/875P chips are called MCH (memory controller hub) or "northbridge" chips. The ICH5/ICH5R chips are

I just noticed the 4.9-20030914-PRERELEASE and made a set of installation boot floppies from it to see which of the devices in my new PC the PRERELEASE would support. It wedged hard during the boot autoconfiguration monologue, just after typing these lines on the console: atapci0: <Intel ICH5 ATA100 controller> port 0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 irq 0 at device 31.1 on pci0 ata0:

A few hours ago I downloaded .../i386/ISO-IMAGES/4.9-RC1-i386-disc1.iso and made kern/mfsroot floppies from it. If I enable my ICH5R SATA controller in "native" mode, the 4.9-RC1 GENERIC kernel hangs solidly (only the system reset button can unwedge it) during device configuration. The last line of bootstrap monologue written by the kernel is: plip0" <PLIP network

There seems to be an inconsistency between release 4.9-RC and 5.1 ufs support. If I fsck the same ufs (type 1 of course) file system on both releases, each claims that the other has left incorrect summary data in the superblock. Presumably only one can be correct. I just don't know which to blame. I couldn't find a FreeBSD problem report about bad summary data. I will submit one, but

Hi I have installed CentOS 5 on my computer which has an Intel ICH5 sound chip. The card appears as it should, and I can adjust the volume just fine. However, when I try to play a sound file(.ogg for instance), rhythmbox plays through the file, but no sound is heard. I've tried as root, and I've tried doing cat /dev/urandom > /dev/dsp, and it's all quiet. Output from lspci:

Saw your post on -stable about this, and decided to take a look since I'm about to get my hands on a similar (82801DB) motherboard. If it's the USB 2.0 controller that's isn't being detected, shouldn't ehci by patched instead of uhci...? You may want to give the attached, completely untested, patch a try. I.e. it compiles on my box, but I don't have any hardware to

Dear All, Can anyone recommend a scanner that works well on 4.8. Thanks in advance, Regards, Dave -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 187 bytes Desc: This is a digitally signed message part Url : http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20030906/4c29ef0a/attachment.bin

Does anyone know if the te110p would have any problems running on one of these chipsets? Need new server quickly and the acer altos g310 boxes look relatively good...

Has anyone done any integration work with Covad's hosted solution ? I am considering Covad's hosted solution and want to be able to use Asterisk to develop some other apps. Anyone else tried this ? how did Covad react. I know they use MGCP. Another thing, the Cisco reseller rep tells me if I have a bunch of 7960's setup for MGCP (for use with Covad) I will need to get these

Thomas, Have spoken to Soren, from my bootlog he believes that the problem is in atapicam causing the system to lock up. He is happy to answer some questions but doesnt have time to delve into atapicam himself. Did you author atapicam, I have seen your name on the sourcecode, can you help me further? Whats next? Thanks Adam. -------------- next part -------------- An embedded message was

I upgraded from 6.2 to 6.3 p5 last night. Upon rebooting, the second disk in the mirror is missing. # atacontrol status ar0 ar0: ATA RAID1 status: DEGRADED subdisks: 0 ad0 ONLINE 1 ---- MISSING # grep ata /var/run/dmesg.boot ad0: 238475MB <WDC WD2500AVJB-63UDA0 00.02C01> at ata0-master UDMA100 ad1: 238475MB <WDC WD2500AVJB-63UDA0 00.02C01> at ata0-slave UDMA100 ar0: disk0

Dear List, This is my second post since I did not receive any answers the first time. I have P4P800-VM motherboard with serial ata controlers (ICH5) and serial ata discs. I managed to install FreeBSD 4.9-STABLE on this box when setting the IDE controller in legacy mode. Everything works normal except when booting, the drives are set into UDMA33 mode: atapci0: <Intel ICH5 SATA150

Hi, I have strange problem when booting FreeBSD-6.x in HP Proliant ML370 G4. The problem is "-" appears on the screen and it never boots unless somebody hits the "Enter" key. Sometimes even PS2 keyboard doesn't respond during that time. Tried with USB keyboard, same problem. The machine has dual Xeon 3.2 GHz, 1GB of RAM and LSI Logic (mpt-5.0.5.20.00 bios) LSI1030-IT

Hello I am using a Junghanns QuadBRI ISDN card - the module name is qozap. If I like at my interrupt assignment, qozap is sharing interrupt 10 with libata and uhci_hcd. I think libata is the IDE hard drive module and uhci_hcd is a USB module. linux:~ # modprobe qozap linux:~ # cat /proc/interrupts CPU0 0: 12634579 XT-PIC timer 1: 10 XT-PIC i8042

Anyone using boards with this chipset? I've gotten some dual core single cpu boxes along with the physical dual cpu boxes I just received and they're using the Serverworks HT1000 (Broadcom 5785) chipset. My CentOS 4.2 DVD doesn't want to recognize the chipset so I can't see any of the SATA drives in the integrated SATA ports. Drives on 3Ware cards work as expected, but I

I'm looking at deploying a new set of servers based around Intel P4 800MHZ FSB processors. Currently I'm looking at the following 2 motherboards and I'm wondering how well supported they are under -STABLE (specificaly the ATA and LAN as well as text mode video) Model Chipset ASUS P4P8X Intel 865P ASUS P4P800 Intel 865PE Also I'm looking for recommendations on Dual Xeon

What about the Asus M2N-SLI Deluxe motherboard? It has 7 SATA ports, supports ECC memory, socket AM2, generally looks very attractive for my home storage server. Except that it, and the nvidia nForce 570-SLI it''s built on, don''t seem to be on the HCL. I''m hoping that''s just "yet", not reported yet. Anybody run Solaris on it? Or at least on any

OK. Now I show my ignorance. What's the difference between a T-1 and a channelised T-1? I see that Covad's voip service (formerly GoBeam) requires a channelised T-1. Then I read recently on the list that many T-1s being installed are actually HDSL....which would be not a T-1 at all...right? Michael -- Michael Graves mgraves@pixelpower.com Sr. Product Specialist

I'm not having any trouble with interrupts, but here's my /proc/interrupts on Fedora Core 2 on a hyper-threading CPU and using the SMP kernel (2.6.5-1.138). I don't think I need to worry about uhci_hcd, nothing is plugged into USB, but libata is the disk driver. How do I get libata and wctdm to use different interrupts? $ cat /proc/interrupts CPU0 CPU1 0: