similar to: Via EPIA Mini-ITX motherboard

i had such problems on my mini-ITX. when sharing irq's with video or sound card, network traffic during ogg playing (for example on nfs) or quick moving windows crashed the interface. ifconfig down/up resolved the problem. it has been solved for a while now (i couldn't reproduce this problem) i think. regards, OLivier Le Jeudi 12 D?cembre 2002 03:45, The Anarcat a ?crit : >

Hi, haven't found anything in google's, i wonder if there is a comparative page of what to expect from running * on motherboards like the EPIA and similar ones. Since i have not used *ever* such kind of mini atx form factor boards, I have no clue about their performance. SIP-SIP communications, voicemail SIP-TDM communications, voicemail how may users (SIP hardphones and analog phones

I've seen the embedded posts. Is anyone running Asterisk on the MINI ITX? James Taylor MetroTel 3505 Summerhill Road Suite 11 Texarkana, Tx 75503 903-793-1956

Hello everyone, Does anyone out there have actual experience with running * on a mini-itx board from VIA? They look good, but I have some reserves because of VIA's problems with PCI latency in recent years (audio dropouts, wierd things happening). I am looking at the EPIA CL-10000. For $270, I can get a CL-10000 (1ghz C3, dual ethernets, etc), 256mb RAM, and a nice small (12 x 2 x 11)

Hi, I have a EPIA mini-itx board that I have been running Fedora 4 on. I want to install CentOS 4.4 on it since FC4 is no longer supported. The install goes fine but when I reboot the machine after the install I get errors like the following: hda:<4>hda: dma_timer_Expiry : dma status == 0x21 There are other errors about not being able to access the disk and eventually the kernel panics.

Hi Everyone, I'd be grateful if anyone can help with a couple of queries I have. Recently I downloaded Centos 3.3 and cannot get it to install I my system. The system I am using to install is a based on an original EPIA Mini-ITX m/board. At a certain point in installing it comes up with an error saying something like "system not supported". Can anyone advise if they have got

Does anyone have recommendations for (or against) mini-ITX platforms to be used with Wildcard X100P and TDM400P cards? I am considering the use of systems using VIA EPIA CL and Epia M as small, quiet platforms on which to host Asterisk.

I have a TDM400p with 3 fxs and 1 fxo daughter cards. It's in a mini-itx case with a 'right-angle' PCI riser card so the TDM400p is 'sandwiched' between the Atom D525 CPU and the 2.5" hard drive. I'm getting a bunch of clicks and pops on all ports. Has anybody had a similar experience? Did you find a solution? -- Thanks in advance,

Hello, I'm trying to put together a low cost - low powers PBX appliance for several customers. I have purchased a couple of the soekris net4801 boards and have asterisk up and running on them fine but they just don't quite cut it in the processing power department. I've been able to get about 10 simultaneous SIP calls with simple ulaw (no encoding decoding). While this might be OK for

-------------- next part -------------- An embedded message was scrubbed... From: Steve Rodgers <hwstar at rodgers.sdcoxmail.com> Subject: Via Mini-itx anaconda install failure Date: Sat, 1 May 2004 14:31:43 -0700 Size: 849 URL: <http://lists.centos.org/pipermail/centos/attachments/20040501/e69b2948/attachment-0005.mht>

I am looking into convising the boss to get me a mini-itx system to replace my workhorse notebook (I have to have a corp notebook and I can remote terminal into a Centos server from it). So I have been playing with one mini-itx system (the decTOP) and am looking at my options. I want a fast processor, 1Gb memory, LAN, 4USB, VGA. Wireless and bluetooth optional USB dongles along with a

Is there anyone who has successfully put together a "high-powered" mini-itx ZFS box that would be willing to post their system specs? I''m eyeballing the KI690-AM2... http://www.albatron.com.tw/english/product/mb/pro_detail.asp?rlink=Overview&no=239 ...but am having a difficult time locating it and a suitable case currently. I was in negotiations with a hardware source,

Hi, As the subject suggests, I am trying to remote boot a Mini-ITX system. I am using PXELinux as the bootloader, and Memdisk (2.11) as the 'kernel'. My ramdisk image is a hard drive image based on PC-DOS. Two things go wrong during the boot process. 1. "INT 13 08: Failure, assuming this is the only drive" message 2. "Loading boot sector... booting..." message,

Hello Before I order a Travla C156 case (http://206.14.132.88/products/Travla/c156/C156.html), a Via mini-ITX motherboard (either the fanless ME6000 http://idotpc.com/TheStore/pc/viewPrd.asp?idcategory=50&idproduct=4 or the fan-equipped M10000 http://idotpc.com/TheStore/pc/viewPrd.asp?idcategory=50&idproduct=163 ) , and a PCI FXO card from Digium or OpenVox... has someone already

I've got Asterisk up and running on a VIA mini-itx M10K with a TDM-400 card but I'm having a terrible time with the sound setup. I tried RH9 and Debian distributions, with 2.4.18, 20, 22, 24 and 26 kernels. I've used the VIA drivers, ALSA drivers, OSS drivers and Kernel drivers with varying results. I can setup the audio to work with a few different applications, 2 channels and 6

> > JR Richardson wrote: > > > I?ve got Asterisk up and running on a VIA mini-itx M10K with a TDM-400 > > card but I?m having a terrible time with the sound setup. I tried RH9 > > and Debian distributions, with 2.4.18, 20, 22, 24 and 26 kernels. I?ve > > used the VIA drivers, ALSA drivers, OSS drivers and Kernel drivers > > with varying results. I can

In asterisk 1.2 branch SVN 51363 zaptel svn 1980 libpri svn 393 addons svn 332 My equipment is a Via EPIA minit-itx CN10000 1.2ghz, 1gb ram and a tdm400p (4fxo). A call comes from zap, a SIP ulaw receives the call, talks for a while and when SIP users tries to park the call, then dozens of... WARNING[3853]: channel.c:781 channel_find_locked: Avoided initial deadlock for '0x91bb840', 10

Hello I am running Asterisk on SUSE Linux Professional 9.3 on a VIA Epia M Series motherboard - CPU runs at 1GHz. There is no fan - just a large heatsink. Currently system is running off standard IDE hard drive - because I couldn't get astlinux to run with my Digium TDM04B card (only PCI card in system). Strangely I also have the same system also running SUSE Linux running as a file

Hi, I'm using Kubuntu and have a problem with the ISOLINUX CDROM booter with versions used since (K)Ubuntu 7.04. The ISOLINUX booter versions 3.36 and 3.53 do not boot my motherboard. The version shipped with Ubuntu 7.04 is I believe ISOLINUX 3.31 but it displays for such a short time I could be wrong. I'm writing to this mail list in case the original Ubuntu bug report never made it

Hello! In spite of a number of complaints, I have tried to use a TDM400 on a Via EPIA-MII motherboard with a 1.2GHz C3 CPU. cpuinfo and interrupts are included at the end of this e-mail. I have had no problems with it so far that I can attribute to the computer. I have, though, had continual problems with a certain telephone... Anyway, this module currently has 3 x FXS modules and 1 x