similar to: dvd+rw-tools ported to FreeBSD (Sony 500A DVD[+/-]R[W] support)

I'm not subscribed to this list; but I read that Matthew Dillon has ported the dvd+rw tools to FreeBSD. I just compiled and installed the application; but I can't burn to a DVD+RW on a Sony DRU-500A. command: growisofs -Z /dev/acd0c -rl ./testfile result: ":-( unable to CAMGETPASSTHRU for /dev/acd0c: Inappropriate ioctl for device" The DVD+RW website:

Hi, so I just bought a NEC 1300A, primarily, because it allows me to write DVD+ and -RW. Using DVD-R discs (and currently no options to try other media, due to shops being closed), I'm unable to write anything, using either the dvd+rwtools port, or the dvdrtools. I've exhausted all references to be found in google, which are in a language I understand, so I'm hoping the list can

Hi, I am running Centos 4 (fully updated on this box). I removed the old DVD writer (/dev/hdc) and installed a new LG GH20 "Internal Super Multi DVD Rewriter" with a SATA interface - this shows up as /dev/scd0. When I insert a pre-recorded DVD autorun mounts it and displays the contents without any hassles. It appears to me that the required kernel modules are loaded - as copied

> -------- Original Message -------- > Subject: dvd+rw-format -force problem > Date: Thu, 31 Jul 2003 21:30:00 +0200 > From: Melvyn Sopacua <freebsd-stable@webteckies.org> > Organization: WebTeckies.org > To: stable@freebsd.org > > I haven't felt the need to fully blank a DVD+RW for a while untill today. Formally speaking blanking is not appicable to DVD+RW.

That's where I first went for information. I've successfully burned a CD-R using cdrecord, as opposed to burncd, which I would normally use for ide burners. I will check on the firmware. Thanks, Andrew Gould --- "Thomas T. Veldhouse" <veldy@veldy.net> wrote: > Try visiting > http://fy.chalmers.se/~appro/linux/DVD+RW/ and make > sure your > hardware is

On Sun, 29 Apr 2018, Thomas Schmitt wrote: > Michael Hennebry wrote: >> The last time I use it [K3B], , it crapped out after writing, >> but before finalizing. > > Sounds like a growisofs problem. > > If it was with unformatted DVD-R or DVD-RW media, does it resemble this > error ? > https://bugzilla.redhat.com/show_bug.cgi?id=810483 > > Any message from

On Wed, 25 Apr 2018, m.roth at 5-cent.us wrote: > Michael Hennebry wrote: >> My Centos 6 wodim tell me that it can only format DVD+RW. >> I have DVD-RWs. >> Even when I format a DVD-RW on my standalone DVD recorder, >> wodim still will not write to it. >> Is there a centos-6-useable mechanism >> for formatting and writing DVD-RWs? >> > Have you ever

My Centos 6 wodim tell me that it can only format DVD+RW. I have DVD-RWs. Even when I format a DVD-RW on my standalone DVD recorder, wodim still will not write to it. Is there a centos-6-useable mechanism for formatting and writing DVD-RWs? -- Michael hennebry at web.cs.ndsu.NoDak.edu "Sorry but your password must contain an uppercase letter, a number, a haiku, a gang sign, a heiroglyph,

Dear all; I have a dataframe with several columns. The columns are the elevation, volume and the area of the cells (which were placed inside a polygon). I have extracted them from DEM raster to calculate the volume under polygon and the elevation for a specific volume of the reservoir. > head(x6,2) Elevation Vol Area V_sum A_sum 1 2145 13990.38 85.83053 13990.38

Hi all; Just to ask if you know about any available function in R to identify points in a image plotted in X11. Something like the function identify(), but able to extract (x,y,value) groups from the image. Thanks and best regards, Javier

I'm trying to use DVD-RW ("minus RW") disks in my LG GSA-4040B drive. I can write a new disk just fine, but can't find any way to blank or re-use a disk. When I run xcdroast and click on the "Blank CD/DVD+-RW" button, I get "Error while blanking." Here is last part of the dialog: Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd) Driver flags

On Wed, Apr 25, 2018 at 09:30:46AM -0500, Bill Gee wrote: > On Wednesday, April 25, 2018 9:10:34 AM CDT Michael Hennebry wrote: > > My Centos 6 wodim tell me that it can only format DVD+RW. > > I have DVD-RWs. > > Even when I format a DVD-RW on my standalone DVD recorder, > > wodim still will not write to it. > > Is there a centos-6-useable mechanism > > for

I am getting the following message when Shorewall stops can anybody shed any light on this message and where I should be looking? Thanks root@bobshost:~# shorewall stop Loading /usr/share/shorewall/functions... Processing /etc/shorewall/params ... Processing /etc/shorewall/shorewall.conf... Loading Modules... Stopping Shorewall...Processing /etc/shorewall/stop ... IP Forwarding Enabled

My backup script split filesystem dumps to files with size of 4,37 GB (4 588 544 kB). It's just an optimal size to fill out DVDs. At this moment I have to burn them from windows via smb-link becuase I didn't manage to do this task from FreeBSD console due to 2GB/4GB filesize restrictions (growisofs). I'm using freeware CDBurnerXP to burn my backups (ISO9660/UDF/Joliet), and they

Hello CentOS / RedHat / IBM folks! I am wondering if I can get a communication channel opened with someone who can affect changes win upstream RHEL? I don't have support accounts with RHEL, and use CentOS almost exclusively. I did have a direct email conversation with Mr. Daniel Walsh regarding these problems, but his answer was to create custom policy to allow what's being denied, as

I just got a Dell Dimension e521 (AMD 64 x2, nVidia MCP51 chipset) and so far it has been fine. Today I tried to burn some CD-R and DVD-R disks and have been able to do nothing but make coasters. The drive is a TSST TS-H653a (Samsung OEM) and does have the current firmware. Playing back data, audio, and video disks work just fine, but recording is a different matter. The drive shows up as

Hi, I want to generate a number of vectors and store them with different names, like this: x=1 while (x<100) { vector#x# = rnorm(100) x=x+1 } where each vector has, at its hand, instead of #x# a number which goes from 1 to 99. How can I do this? Thanks Gabriele Zoppoli, MD Ph.D. Fellow, Experimental and Clinical Oncology and Hematology, University of Genova, Genova, Italy Guest

Hi Michael, I am trying the solution you've suggested below: DAT <- data.frame(x = runif(1000, 0, 20), y = rnorm(1000)) DAT$xbin <- with(DAT, cut(x, seq(0, 20, 2))) p <- ggplot(DAT, aes(x = x, y = y)) + geom_point(alpha = 0.2) + stat_quantile(aes(colour = ..quantile..), quantiles = seq(0.05, 0.95, by=0.05)) + facet_wrap(~ xbin, scales = "free") print(p)

On Wednesday 29 October 2003 17:29, Ricardo wrote: > Excellent! > > With WinAmp 5 it works but after about 45seconds I get the same messages in > error.log > > [2003-10-29 08:38:33] DBUG format/format_generic_write_buf_to_client > Client had recoverable error -1 This should never happen. It looks like a bug present in some old versions (> 6 months old), are you sure a

Hi, How can plot a frequency distribution curve for the following data.    V1      V2 1   1 160.54% 2   1 201.59% 3   1  18.45% 4   1 179.03% 5   1 274.37% 6   1   0.00% 7   1  24.52% 8   1  39.17% 9   3  43.72% 10  1  53.06% 11  1  64.97% 12  1  79.84% 13  1  98.08% 14  1 115.32% 15  1 127.96% 16  1 155.38% 17  1 157.25% 18  1 193.17% 19  1  51.53% 20 15  99.32% 21  1 106.86% 22  1 219.44%