similar to: 4.8-RELEASE not identifying scsi drives

I've just had a 4.9p1 system partially deadlock for about 30 minutes and then spontaneously(?) recover. The "ps" results point at vinum. I've never seen this before and don't recall anything like this being mentioned here before. At the time, I had two find's running in a large NFS mounted filesystem and was doing a "cvs -d /usr/ncvs -R checkout -P ports" from

Hi all, I have some problems with my gvinum setup after the system panic'ed. Afterwards the system fails finding the plexes to the subdisks (or at least that is what I can understand after having searched the gvinum source code for the error string in the DMESG log..) The machine is an IBM Netfinity 5000 and the internal HW self tests does not find any errors in the hw. Luckily my root is

Hello, I am having a problem with a new server running FreeBSD 4.9-PRERELEASE. Once every two days or so, it reboots itself.. there is no exact time of the day it reboots.. It rebooted itself at 4:25 PM EDT on 9/25, and 3:05 AM EDT on 9/29 (today). I thought it's the bad memory or some sort, so I've been running memtest today and memtest reports no sign of trouble with the memory...

i trust i am still new in freebsd, after go through all mail and book, = now seem to be more close, i got 3 server and a notebook to play with, = install no problem. cvsup not problem.make buildworld not problem. make = build kernel become,every machine i got different error code 1,=20 1-one got system full=20 2-one showing this sometime=20 > anyone know the best way to be one time success,not

I have same problem on same class machine, here is dmesg from failing boot (via serial console): -------------------- Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.8-RELEASE-p7 #0: Sat Sep 20 17:07:38 EEST 2003

My new PC has an internal 16-in-1 card reader connected via USB 2.0. The device is the Techsolo TCR-1640 (http://www.techsolo.de/product/cardreader/tcr_1640/index.php). I boot from a compact flash inserted in it and I can mount and unmount the same CF once the system has booted and has mounted the root partition from my graid3 array. The problem arise when I replace the inserted CF with another

Dear Sirs. It seems to me a never ending story. We run a box with a TYAN Thunder 2500 Dual SMP mainboard, 2GB ECC Tyan certified memory, AMI Enterprise 1600 RAID adapter and additional Intel 1000/Pro server type (64 bit) GBit LAN NIC. With FreeBSD 4.8 this was stable, but to achive this state was really hard! It is a story similar to that what happend when we changed towards FreeBSD

I seem to have managed to end up with a pool that is confused abut its children disks. The pool is faulted with corrupt metadata: pool: d state: FAULTED status: The pool metadata is corrupted and the pool cannot be opened. action: Destroy and re-create the pool from a backup source. see: http://illumos.org/msg/ZFS-8000-72 scan: none requested config: NAME STATE

Hello all. I have a supermicro 16 bay box with a LSI 9211-8i card. We use it for temp data storage, and we wanted to try the l4z compression. After updating the source tree to r247839: and doing a make buildworld cycle all works fine. But at boot time we get some warnings. make_dev_physpath_alias: WARNING - Unable to alias gptid/281951f4-a996-11e1-83eb-00259061b51a to enc at

Hi. If I create a zpool with the following command: zpool create tank raidz2 da0 da1 da2 da3 da4 da5 da6 da7 and after a reboot the device names for some reason are changed so da2 and da5 are swapped, either by altering the LUN setting on the storage or by switching cables/swapping disks etc.? How will zfs handle that? Will it simply acknowledge that all devices are present and the pool is

Hi. On one of my fresh installed servers I am seeing the following output during boot: gptzfsboot: error 4 lba 30 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 30 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot:

Hi, Can someone please help me with this? I have just upgraded from 4.7 to 4.8-STABLE and this is what I am getting when I try a tape backup. Please CC as I am not in the list. It was working well before the upgrade (dump -0ua -f - / | gzip -c -9 | dd of=/dev/nsa0). Thank you, Lefteris Tsintjelis Jul 3 22:55:18 ene /kernel:

Hi All, I am looking at ZFS and I get that they call it RAIDZ which is similar to RAID 5, but what about RAID 10? Isn''t a RAID 10 setup better for data protection? So if I have 8 x 1.5tb drives, wouldn''t I: - mirror drive 1 and 5 - mirror drive 2 and 6 - mirror drive 3 and 7 - mirror drive 4 and 8 Then stripe 1,2,3,4 Then stripe 5,6,7,8 How does one do this with ZFS?

Hi. No biggie, but when I remove a umass device it appears that two kernel messages are being written at the same time. (da4:umass-sim1:1:0:0): lost device - 0 outstanding, 1 refs (da4:(pass6:umass-sim1:1:umass-sim1:1:0:0:0): removing device entry 0): passdevgonecb: devfs entry is gone (FreeBSD 9.1-PRERELEASE #0 r241067) Cheers Michiel

Machine is 4.8-STABLE smaug# camcontrol devlist <COMPAQ BD009122BA 3B07> at scbus0 target 0 lun 0 (pass0,da0) <COMPAQ BD009122C6 B016> at scbus0 target 1 lun 0 (pass1,da1) <COMPAQ BD009122BA 3B07> at scbus0 target 2 lun 0 (pass2,da2) <COMPAQ BD00962373 BCJE> at scbus0 target 3 lun 0 (pass3,da3) <IBM IC35L018UCPR15-0 S70H>

Hi I have a quad processor Compaq Proliant 5500. The output from dmesg seems strange (I have also sent a copy to freebsd-smp to ask about smp issues) and there are also some performance issues which I suspect are smp related. Could anyone who fels so inclined please take a look at the output and let me have any comments. Thanks _______________________________ Copyright (c) 1992-2002 The

Hi, I have some problems with usb da and uscanner giving me I/O-errors. This is on a ASRock K7VT2 board. If there is anything else I could do (testing patches, providing further info), please let me know. 4.8-STABLE from 04.08.2003: - MBO USB-MultiCardReader 6-in-1 mount_msdos => Input/output error - Epson Perfection 1260 Scanner scanimage --test => Error during device I/O

I put this to the smp list and to stable but have had no takers from wither. nThere are both smp and other system issues and I am just wondering if anyoe would be willing to take a look at this output from dmesg and let me have some advice Thanks david ----- Original Message ----- From: "vizion communication" <vizion@ixpres.com> To: <freebsd-smp@freebsd.org> Sent:

Hi, If this is a redundant post I apologize. I am running 2.4.20 on what has been a very stable Athlon machine for months, tried to move a 2 GB file from an ext2 partition to an ext3 and kjournald crashed. Here are the last reminants of my shell scrollback: [*ROOT* mofo /mnt/sda1/mysql/fd 641 ] ll oldmail/ total 2363288 -rw-rw---- 1 mysql mysql 2147483647 Jan 23 18:04 maillog.MYD

Hi Steven, Read/Write errors are recorded when an active path of the geom_multipath device is pulled while running the i/o on dataset created for the pool. Running I/o on dataset using dd. *Freebsd version :* 9.0 *Patch imported from stable 9 : *r229303, r234916 *zpool status:* * * pool: poola state: ONLINE scan: none requested config: