similar to: Peculiar Boot Failure

Dear List, This is my second post since I did not receive any answers the first time. I have P4P800-VM motherboard with serial ata controlers (ICH5) and serial ata discs. I managed to install FreeBSD 4.9-STABLE on this box when setting the IDE controller in legacy mode. Everything works normal except when booting, the drives are set into UDMA33 mode: atapci0: <Intel ICH5 SATA150

I'm trying to get stable booted on a little ITX board off of a CF card, but it hangs as it's trying to run init. Here's what the boot looks like. SMAP type=01 base=0000000000000000 len=000000000009fc00 SMAP type=01 base=000000000009fc00 len=0000000000000400 SMAP type=02 base=00000000000f0000 len=0000000000010000 SMAP type=02 base=00000000ffff0000 len=0000000000010000 SMAP type=01

Hi there, sorry for rather long mail. Two verbose dmesgs and `pciconf -vl` outputs attached. trying to set up new machine based on ASUS P4BGL-MX motherboard, I'd encountered hangs after detecting pcib1 (ICH2). MB has rl 8100 ethernet chip onboard. This is for 4.8-R; however, machine hangs in very similar way also with 4.4-R and 5.1-R. Matrix of hangs: Onboard Ether External Ether Result

Hi all, I have been tracking -STABLE on one of my home machines for a little while, now and noticed something the other day. I was given this system, and I have only run FreeBSD-STABLE on it. The motherboard is a Supermicro370SWD with an Intel 810 "Whitney" chipset (82810DC100 GMCH + 82801AA ICH). The docs say that there is support for UDMA66, but FreeBSD reports that the drive is

Dear colleagues, experimenting with vinum stripes and mirrors, I'd stuck myself with the following: panic: throw_rude_remark: called without config lock (from vinumconfig.c:throw_rude_remark:103) The system before this panic has two 160G drives with two vinum partitions on each (one for mirrored root and one for the rest with swap between); these were ad0 and ad2. For the experiments,

Dear collagues, could someone sched me a light about the following crash (I'm almost sure about hardware, temperature, etc...) Machine is fairly stable; however, there are occational crashes, similar to this one; backtraces are almost always single-step. It's 4.8-R, dmesg and gdb -k output follows ====================================================================================

Hi, I have some problems with usb da and uscanner giving me I/O-errors. This is on a ASRock K7VT2 board. If there is anything else I could do (testing patches, providing further info), please let me know. 4.8-STABLE from 04.08.2003: - MBO USB-MultiCardReader 6-in-1 mount_msdos => Input/output error - Epson Perfection 1260 Scanner scanimage --test => Error during device I/O

Hello, I've got a (P)ATA disk in a special frame. The disk itself supports UDMA-100 (and has an 80-ribbon cable), but the frame isn't compatible with that. By default, FreeBSD negotiates UDMA-100, and the console starts to fill with ICRC errors. In the past, I used a patch to ata-all.c that enabled the following entry in loader.conf to force the disk to UDMA-33, so it worked fine:

With FreeBSD 4.8-20030731-STABLE #0, dmesg messages indicate: module_register: module miibus/ukphy already exists! linker_file_sysinit "miibus.ko" failed to register! 17 module_register: module pccard/ed already exists! linker_file_sysinit "if_ed.ko" failed to register! 17 This doesn't look dangerous but the rl0 ethernet card just stopped recieving packets suddenly and

Kip, Does the problem with Xen 3.1 in HVM/Intel manifest as those BTX halted errors (e.g. http://lists.xensource.com/archives/html/xen-users/2006-10/msg00014.html) ? If so, do you happen to know whether this problem has been solved in Xen 3.2 or 3.2.1? This message of yours was written this March, so I'm assuming that 3.2.1 will contain this fix? Can anybody confirm this? I'm having

Just thought I'd pass along that I have successfully installed FreeBSD 7.0 into a Xen 3.1 HVM. ?This one went as smooth as I expected, considering my experience with 6.3. ?Haven't done any benchmarking or stress testing or port installs or anything. ?But so far it's working nicely. Here's all the info. ?If you'd like to see anything else, let me know. Host hardware: ?

Please CC me on this thread. I'm running: FreeBSD polo.example.org 4.8-STABLE FreeBSD 4.8-STABLE #3: Fri Aug 15 15:36:34 EDT 2003 dan@polo.example.org:/usr/obj/usr/src/sys/POLO i386 I arrived home Friday about 15:30 to find this box had rebooted and having trouble with its IDE drive. A screen shot of the console is at http://www.freebsddiary.org/tmp/ata-failure.jpg I rebooted into

I've finally been able to capture the panic, as now it occurs even with DDB configured. Of the six machines I have running 6.1-RC (CVSupped today), this is the only one that does this. /boot/kernel/kernel text=0x30c488 data=0x3b6a0+0x3170c syms=[0x4+0x46430+0x4+0x58da4] no such file or directory - Hit [Enter] to boot immediately, or any other key for command prompt. Booting

-- Previously Posted to FreeBSD-questions Update: I've changed the RAM in the machine. That seemed to fix the problem for a little bit, but the problem has started occuring again. Also, I'm not subscribed to the list, so please reply to this message directly. Thanks for all your help. -- Hello, Recently, I've been having kernel panics on 4.8RC. This made me upgrade to

I am getting these messages every 30 seconds or so. I searched around and found a few other post about this problem with other devices, but no answers to the problem. I didn't notice any of these message until I upgrade to 4.8-RELEASE the other day. This is a dual processor machine. It happens on all my machines that have em devices, which all happen to be dual processor machines. I

This morning, I upgraded my main system to an up-to-date -STABLE including acpi and it now hangs during shutdown after reporting: Waiting (max 60 seconds) for system process `vnlru' to stop...stopped If I set hw.acpi.disable_on_poweroff=0 then the shutdown completes but poweroff fails with (hand copied): ACPI-1287: ***Error: Method execution failed [\_PTS] (Node 0xc21ed450),

Hello, I am attempting to get by broadcom wifi card up and running, am sick of trying to get ndis working, and am attempting to use the bwi driver (originating in dragonflyBSD). I'm hoping others here have tried to do the same and have some pointers. I'm using 7.1-RELEASE (system/source are in-sync) and my card is a BCM94306MP. My dmesg is posted below. Bwi(4) is installed and it

Hello, My server is experiencing occasional kernel panics when under moderate load. I'm attaching a crash dump and the dmesg output. I'm not sure how to read the kernel backtrace but it looks like the Intel NIC (em0) caused the problem. Occasionally, I used to get a "em0: watchdog timeout -- resetting" error message, but I never had a kernel panic. The problem started last

Hello all, I have problems with enabling support for SMBus on STABLE. My motherboard is ICH3 (82801CA). As suggested in LINT I added 3 lines to my kernel config: device smbus device ichsmb device smb But after compiling, installing and rebooting /dev/smb[01] are not available and no changes in kernel startup messages either. So I

Hi, I have Orinoco 802.11b PC Card from Proxim. I plugged it to pcmcia slot, but It doesn't work - no blinking LEDs, no wi0 in ifconfig. I have 7.1-PRERELEASE, laptop Prestigio Nobile 157. On NetBSD seems working, but NetBSD is not friendly with me. if_wi driver included in kernel. ----- dmesg Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989,