similar to: Maxtor 5000XT Firewire/USB2 Drive

Hello, I am attempting to get by broadcom wifi card up and running, am sick of trying to get ndis working, and am attempting to use the bwi driver (originating in dragonflyBSD). I'm hoping others here have tried to do the same and have some pointers. I'm using 7.1-RELEASE (system/source are in-sync) and my card is a BCM94306MP. My dmesg is posted below. Bwi(4) is installed and it

Hi, I have Orinoco 802.11b PC Card from Proxim. I plugged it to pcmcia slot, but It doesn't work - no blinking LEDs, no wi0 in ifconfig. I have 7.1-PRERELEASE, laptop Prestigio Nobile 157. On NetBSD seems working, but NetBSD is not friendly with me. if_wi driver included in kernel. ----- dmesg Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989,

Hi! Just before we start, this is not the "USB hang on boot" problem. OK? This post got rather long, so I'll summaries it all in a sentence here: With FreeBSD 4.9-rc on an ASUS A7N8X with a cheapo memory stick, simply plugging it in and taking it out a couple of times is a guaranteed panic. I use only one USB device, a cheapo USB memory stick, which I recently bought on a

I'm running FreeBSD 7.1-PRERELEASE over Asus P5Q motherboard. Such board comes with an nic requiring age0 driver. When the nic is under load, such trasferring big amount of data over gigabit connection (let's say some gigabyte backups), the computer hangs, sometimes with panic, sometimes freezing. Before that i was using an Intel nic with em0 driver and 7.0-Stable#2.. and that

Hi, I've installed 7.2-PRERELEASE, csup on 20090423 at around 19:00 UTC. When I rebooted after installing world, X started (xdm in /etc/ttys) and immediately panicked the system, even before switching to the new VTY. I removed all ports and installed Xorg from today's ports HEAD, same result. This is the case with my old xorg.conf and a new one from 'Xorg -configure'. I

Has anyone ever tried to run maxtor's "powermax.exe" program, that attempts to determine if a drive is having problems prior to RMA, under wine? Thanks!

I have a network accessible (192.168.2.97) Maxtor Shared Storage drive that I want to use to backup the Linux (Slackware) systems on my private LAN. I can "smbmount" the drive okay on my Linux systems, but when I try and use rsync to do a backup rsync fails with a message about failing to change owner. Digging a little deeper into the problem I find that the directories/files on

Hi, I am trying to get a USB device working on a Windows 7 virtual machine, and it needs USB2 to work, so the USB passthrough does not work. I have searched for an answer and either the answer is so obvious I am being thick, or too complicated for anyone to address it. Can I simply do a PCI passthrough of a USB host controller? Would that then give me a whole load of USB2 ports I could

Hello, I have a version 29 of Hauppauge pvr usb2 which i am using as a fm receiver. It is connected to an Intel NUC on a usb3 port running kernel linux-3.8.12. The fm audio is fed to ices encoder using mpeg2desc -a0 < /dev/radio0 | mpg123 -s - | ices /tmp/ices-stdin.xml This works well for two days. However something kills of encoding after two days of running. Ices reports in the log

Hi all, Can anyone please advise the correct process for defining a USB device to point to a USB 2 Controller? Specifically, how do you define a USB device to use the EHCI controller in a guest xml file? To summarize my problem: I have 1 x USB1 device and 1 x USB2 device that I would like to use from within a Windows XP Guest. If I add the USB2 device (Avid M-box) to the guest machine via

Hi all I've very big problem with my nfsd server. I'm running FreeBSD-stable and sometime (one time/week) i've this kind of message on the console : bge0 watchdog timeout problems fxp1 watchdog timeout problems and all my network card is down. Nothing can make the network card work again (only reboot working). There are only one service I need on this server and

Hi, Sorry if this is an old and fixed issue but I can't really seem to find a definitive explanation/fix to this in the mail lists. Ever since I upgraded to FC2 my server randomly decides that it can no longer access the disk and "aborts" the ext3 journal leaving it read-only as expected. I've seen the same errors on other mail list, explained away as disk or disk cable

Skipped content of type multipart/mixed-------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 187 bytes Desc: This is a digitally signed message part. Url : http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20080617/73afe727/attachment.pgp

Usage: usbversion=1|2|3 (default=0, no usb controller defined) Specifies the type of an emulated USB bus in the guest. 1 for usb1, 2 for usb2 and 3 for usb3, it is available only with upstream qemu. The old usb and usbdevice parameters cannot be used with this. Changes from v6: - now usbversion cannot be used with usb and usbdevice parameters - now default is 0 (no usb controller defined) Will be

I've got a HP dv8000 laptop. Setting up the wpi driver for wireless freezes the system on boot with the following error: wpi0 requested unsupported memory range wpi0: could not allocate memory resource It lists a pcbi device (pcbi4 i think) and an actual memory range, but since I have to reboot using kernel.old the /var/run/dmesg.boot is wiped with the info. Is there anyway to grab the

Hey folks. There are rumors out there that setting /var/qmail/control/databytes to a reasonable value (for example 16384 = 16MB) will prevent the possibility of exploitation regarding the integer overflow in function blast(). That is not true. This is how blast() is called: void smtp_data() { int hops; unsigned long qp; char *qqx; if (!seenmail) { err_wantmail(); return; } if