similar to: Old machine -

I upgraded my 7.0 system to 7.1-RELEASE with freebsd-update only to find that it no longer boots correctly, instead crashing with a BTX backtrace. If I break to the loader prompt and use 'ls /boot', I also get a backtrace. A new install of 7.1 on this hardware using a separate SCSI card and drive array also leads to a BTX backtrace. I have copied this below as the first (most

The stack dump message is white text on black background. Right above the stack dump message, still in yellow-on-blue from the PXELINUX settings, is the text: Building the boot loader arguments Relocating the loader and the BTX Starting the BTX loader <change to white-on-black> BTX loader 1.00 BTX version is 1.01 <stack dump> Would that business of "arguments...

latest pxeboot (7.1): mother-board NIC/LOM CPU ------------- ------- --- Intel SWV25 em xeon works fine SUN X2200 bge amd works fine DELL PE 2950 bce xeon failes 95% of the times hangs or goes into btx dump regs. mode :-) Intel SE7320VP21 msk xeon failes 50% of the times - hangs pxeboot with btx.S 1.45 2008/02/27 23:35:39, works fine. so it seems that changes since 1.45 have

I have created a function to do something: i <- factor(sample(c("A", "B", "C", NA), 793, rep=T, prob=c(8, 7, 5, 1))) k <- factor(sample(c("X", "Y", "Z", NA), 793, rep=T, prob=c(12, 7, 9, 1))) mytable <- function(x){ xtb <- x btx <- x # do more with x, not relevant here cat("The table has been created,

Ok do not know what is causing this problem and would appreciate some help in tracking down the cause. FreeBSD 4.7 System runs fine for maybe a week and then all networking stops - without warning. I do not know anyway of persuading it to resume networking without rebooting. Does anyone have some useful suggestions on how to diagnose the cause? David

Hello, I have a problem with loader. I recently upgraded from 6_rel to 7_rel. Now when I install world there is a problem booting. Here is what I do: cd /usr/src make buildworld make buildkernel KERNCONF=BLACK make installkernel KERNCONF=BLACK At this point I can reboot and all is good. After boot I install the new world: cd /usr/src mergemaster -p reboot into single user mode cd /usr/src make

I have a new Polycom Spectralink 8002 and am having trouble with the configuration or the unit but I can't see what's wrong. The unit does not seem to even attempt to register with the Asterisk proxy but I can make calls to it. I have viewed the syslog from the device which it will actually write to the asterisk server so I know it can be reached. I have also run a sip debug and

OK What client cards do work? For each of the following: 802.11a 802.11b Media: PCI PCMCIA USB OS: FreeBSD 4.7 Recomendations please Thanks David ----- Original Message ----- From: <john@critchley.biz> To: "vizion communication" <vizion@ixpres.com> Sent: Monday, April 14, 2003 2:04 PM Subject: Re: Annother Wireless network card annother problem > > > > I

Hi again... The text under "BTX loader..." should appear as a block where each line is 56 characters long. "BTX halted" is on its own line. Apologies for my mailer... -Chris -----Original Message----- From: McMahon, Chris Sent: Wednesday, November 19, 2003 8:32 AM To: 'H. Peter Anvin'; McMahon, Chris Cc: 'syslinux at zytor.com'; 'mike at

Hi Guys I have been taking a close look at some networking opportunities which are being frustrated by the limits which are imposed by NAT. In particular the constraints impose by the embargo on double NATing have an impact for a project I am working on. Has anyone ever seen anything which I would conceptually describe as a reverse NAT proxy? What I want to be able to do is to be able to create

Hi, I tried to upgrade one of my servers from FreeBSD 9.1 to 9.2 with freebsd-update upgrade -r 9.2-RELEASE after the first reboot the system hangs on boot with Invalid format ... BTX halted It's a Supermicro X9SCL-F mainboard. I upgraded FreeBSD from 9.0 to 9.1 REL sucessfull, when 9.1 was released. What happend with the upgrade to 9.2? Here is the screenshot http://212.78.99.130/btx.jpg

I was trying to load a FreeBSD 10 VM on my CentOS 6.4 machine, and it keeps hanging and not completing the boot. I have FBSD 9.x VM's running just fine, but if I try and load 10.x it's a no go. Attaching to the console using VNC, I see: gPXE (http://etherboot.org) - 00:04.0 C980 PCI2.10 PnP BBS PMM7FC0 at 20 C980 Booting from DVD/CD... CD Loader 1.2 Building the boot loader

I put this to the smp list and to stable but have had no takers from wither. nThere are both smp and other system issues and I am just wondering if anyoe would be willing to take a look at this output from dmesg and let me have some advice Thanks david ----- Original Message ----- From: "vizion communication" <vizion@ixpres.com> To: <freebsd-smp@freebsd.org> Sent:

Well, colleagues, I'm stuck a bit. I tried many different ways to setup system with vinum root (the only reference I found yet besides old "bootstrapping vinum" article is Joerg's commit message: http://freebsd.rambler.ru/bsdmail/cvs-all_2003/msg01225.html I failed. I have 4-stable system set up at ad0, and tried to set up pair of drives for new system at ad2 and ad3 (actually,

Hi, [I have added freebsd-security to recipient list as I consider this issue a security risk] Paul Schenkeveld wrote: > Hello, > > On Fri, Jul 14, 2006 at 01:26:38PM +0300, Ari Suutari wrote: >> Hi, >> >> Does anyone know if there are any plans to bring >> pf boot-time protection (ie. /etc/rc.d/pf_boot and >> related config files) from NetBSD to FreeBSD

Hi I am considering the installation of bladeservers. Has anyone used freebsd on bladeservers and if so which manufacturer/models and with what degree of success. Thanks David

Hello... In the split-second before the reboot, I can see that the pxeboot.0 process is indeed started-- pxeboot gets out just over 2 lines of text before the reboot occurs. So it's not a "ready" message. The text in question is (without *'s): ****************************************** PXE Loader 1.00 Building the boot loader arguments Relocating the loader and the

Hi Everyone, Does anybody have any experience using pfSense on Xen? I would most probably have to use HVM... My idea would be to use PCI-Passthrough to the pfsense DomU, and only make the Dom0 accessable via the pfsense firewall Thanks Jonathan _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Hi, I was able to run ./configure and make commands without any issues but when I ran the make install command an error was returned. Can you help me to find out why I keep getting this error: make[3]: *** [install-binPROGRAMS] Error 1 make[3]: Leaving directory `/home/sphynx/src/icecast-2.3.2/src ' make[2]; *** [install-am] Error 2 make[2]: Leaving directory

If anyone has Samba setup to run as a PDC with Solaris 8 or 9 could you drop me a line? I have a few questions I would like ask. Our shop is looking at trying to implement this option with our SMB master. I didnt want to clutter up the list with more than one request. -- Thank you Todd Johnson ============================================== = Steven ?Todd? Johnson = =