similar to: strange crash

Dear colleagues, experimenting with vinum stripes and mirrors, I'd stuck myself with the following: panic: throw_rude_remark: called without config lock (from vinumconfig.c:throw_rude_remark:103) The system before this panic has two 160G drives with two vinum partitions on each (one for mirrored root and one for the rest with swap between); these were ad0 and ad2. For the experiments,

Hi there, sorry for rather long mail. Two verbose dmesgs and `pciconf -vl` outputs attached. trying to set up new machine based on ASUS P4BGL-MX motherboard, I'd encountered hangs after detecting pcib1 (ICH2). MB has rl 8100 ethernet chip onboard. This is for 4.8-R; however, machine hangs in very similar way also with 4.4-R and 5.1-R. Matrix of hangs: Onboard Ether External Ether Result

After updating my kernel from a 4.7-stable to 4.8-stable update, my SB PCI128 is no longer recognized by the pcm driver. Here is my dmesg: FreeBSD 4.8-STABLE #0: Thu Jul 17 14:13:52 CDT 2003 root@hautlos.stout.osu-res.okstate.edu:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz CPU: AMD Athlon(tm) Processor (800.03-MHz 686-class CPU) Origin =

All: I cvsup'ed earlier this evening and am still able to reproduce this panic at will. Command line, panic backtrace, dmesg, ldd output, and mplayer version follow. If more information is needed, just let me know. % mplayer foo.mov [a quicktime file] [plays for awhile, and then panics] # gdb -k -s /usr/obj/usr/src/sys/LICHEN/kernel.debug -e /var/crash/kernel.2 -c /var/crash/vmcore.2

Dear colleagues, I'm planning to debug usb connection with my new SONY CLIE handheld, and found that this process is much complicated by the fact usb.ko module can not be unloaded 'cause some process is referencing it: marck@revamp:~/tmp> kldstat -v -i 11 Id Refs Address Size Name 11 1 0xc0cf7000 1b000 usb.ko Contains modules: Id Name

Dear colleagues, in the process of upgrading my home router I'm trying to utilise Intel D2500CC mini-ITX motherboard[1]. Both stable/9 and head suffer from no scrolling issue: from the beginning of booting the kernel, all output overrides the last line on the screen, while others keep the loader phase. Provided the board has multiple serial ports and the final target (headless

Colleagues, 3 of 4 times this machine failed to boot, panicing somewhere in late kernel initialization phase (before /sbin/init is executed) I have serial console and KDB enabled, so can do experiments. Last two crashes: Fatal trap 12: page fault while in kernel mode fault virtual address = 0x8 fault code = supervisor read data, page not present instruction pointer =

Dear collegaues, please evaluate the patch attached, which allow to use both --detect-renamed and --fileflags extra features. This is meta-patch which sould be applied to detect-renamed. fileflags patch should be applied first, following by the modified detect-renamed patch. It is included in current FreeBSD port, but it seems it would be much more useful to be supported by samba

Pawel, another one (though minor, I suppose) bug report: while playing with my poor pool, I tried to interact with it on -current, thus importing it with -f (without upgrading, of course). After reverting to RELENG_7, I found I no more can access history: root@moose:~# /usr/obj/usr/src/cddl/sbin/zpool/zpool history History for 'm': 2008-10-14.23:04:28 zpool create m raidz ad4h ad6h

On 4/8/06, Dmitry Morozovsky <marck@rinet.ru> wrote: > On Fri, 7 Apr 2006, Mars G. Miro wrote: > > MGM> Greetz! > MGM> > MGM> I have an HP DL145 that I'm having problems with when connecting via > MGM> serial console. I think it's acpi-related. This is on 6.1-BETA4/amd64 > MGM> (5.X is the same also) > > [snip] > > It seems it's

Dear colleagues, experimenting with new amd64-based router we found strange re(4) behaviour when working in autoselect media mode: whenever promisc mode turned on, renegotiating occurs, leading to 3 to 45 (depending on STP settings on the switch) network unavailability. Moreover, some other re(4) setting changes seem to disturb link state unneededly (such as ifconfig re0 -vlanhwtag) The most

I have same problem on same class machine, here is dmesg from failing boot (via serial console): -------------------- Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.8-RELEASE-p7 #0: Sat Sep 20 17:07:38 EEST 2003

Dear Soeren, a couple of months ago, namely > revision 1.8 > date: 2003/05/01 06:20:50; author: sos; state: Exp; lines: +17 -2 > I'm pleased to announce that Promise is now supporting the FreeBSD > project by providing documentation (under NDA) and hardware for > testing. This commit is the first result of the cooperation, and > adds support for several of their new

With FreeBSD 4.8-20030731-STABLE #0, dmesg messages indicate: module_register: module miibus/ukphy already exists! linker_file_sysinit "miibus.ko" failed to register! 17 module_register: module pccard/ed already exists! linker_file_sysinit "if_ed.ko" failed to register! 17 This doesn't look dangerous but the rl0 ethernet card just stopped recieving packets suddenly and

Hi, I have some problems with usb da and uscanner giving me I/O-errors. This is on a ASRock K7VT2 board. If there is anything else I could do (testing patches, providing further info), please let me know. 4.8-STABLE from 04.08.2003: - MBO USB-MultiCardReader 6-in-1 mount_msdos => Input/output error - Epson Perfection 1260 Scanner scanimage --test => Error during device I/O

Hi all, is there a known issue with health monitoring on supermicro SuperServer 6010H? (Im primarily interested in temeperature monitoring) I have tried both mbmon and lmmon with the following results: stats# mbmon -d SMBus[ServerWorks(ServerSet Chipset)] found, but No HWM available on it!! No Hardware Monitor found!! InitMBInfo: Unknown error: 0 stats# lmmon IOCTL: Operation not supported by

Hi, We did an upgrade of one of our machines from an Aug 25 CVS and ever since then one of the machines likes to reboot about once a day. The machine is the following: IBM x340 2x1GHZ Processors 1GB RAM 3x36GB Drives (RAID 5) Mylex ExtreRAID 352 In the panic it mentions httpd, but I don't *think* it's apache (1.3.27) that's causing the problem, or am I wrong? I also believe it is

I am getting these messages every 30 seconds or so. I searched around and found a few other post about this problem with other devices, but no answers to the problem. I didn't notice any of these message until I upgrade to 4.8-RELEASE the other day. This is a dual processor machine. It happens on all my machines that have em devices, which all happen to be dual processor machines. I

Hello fellow R users, I am trying to read a 6.9 million row text file with 26 columns separated by spaces into R using ff. When I specify a small number for first.rows, next.rows and nrows it is read with no issue. However, when I try to specify larger next.rows values and no nrows parameter to read the entire file, I keep getting errors. Please see code below. I am trying to this on a m1.large

I've finally been able to capture the panic, as now it occurs even with DDB configured. Of the six machines I have running 6.1-RC (CVSupped today), this is the only one that does this. /boot/kernel/kernel text=0x30c488 data=0x3b6a0+0x3170c syms=[0x4+0x46430+0x4+0x58da4] no such file or directory - Hit [Enter] to boot immediately, or any other key for command prompt. Booting