similar to: Syslinux 4.10-pre20

Hi, I am a happy user of version 4.06 and have been hoping to upgrade the 5.x series (for the HTTP bits). I have the following problems with the 5.11-pre7 build: 1. TFTP load is horribly slow ... even when the two REAL machines are connected to the same switch. For a typical RHEL installation, the vmlinuz loads ... the initrd.img loads very very slowly and just times out (I waited over 10 mins)

--- On Thu, 5/31/12, Geert Stappers <stappers at stappers.nl> wrote: > > P.S. > > As usual, eagerly (and patiently) waiting for the HTTP > bits to start > > working properly! ;) :) > > How should I read that??.? Does it mean "I'm waiting to > get time to test" > or do you mean "tested, it doesn't work yet"??? > Anyway, please

Test message to see if something is wrong with the mailing list! Regards, Shantanu

-------------------------------------------- On Sun, 10/20/13, Gene Cumm <gene.cumm at gmail.com> wrote: Shantanu, could you please try v6.02?? Your scenario failed on my OptiPlex 760 but with 6.02, it works. See also http://bugzilla.syslinux.org/show_bug.cgi?id=19 Nope, still no joy on the physical machines. Different symptoms though. On the physical machines: The HTTP starts

-------------------------------------------- On Thu, 7/4/13, Matt Fleming <matt at console-pimps.org> wrote: Subject: Re: [syslinux] Syslinux 5.11-pre7 not working To: "Shantanu Gadgil" <shantanugadgil at yahoo.com> Cc: syslinux at zytor.com Date: Thursday, July 4, 2013, 4:51 PM On Wed, 03 Jul, at 11:22:27PM, Shantanu Gadgil wrote: > Hi, > > I am a happy

On 08/11/2014 06:12 AM, Shantanu Gadgil wrote: > Hi all, > > I too am getting positive results using 6.03-pre19 lpxelinux.0, for the problem that I have been facing. > > The symptom was that booting hangs on client side. > On the server (DNSMasq TFTP) it keeps getting a request for the same (MAC address) file. > OR, alternatively it just stops completely. > > My

Hi all, Based on the commitdiff comments, this looks like what I (and many many others) have been plagued with. Machines typically affected: DELL PowerEdge 2950, R720, R810, etc. (server class) DELL PowerEdge 960 (desktop class) Eagerly awaiting the next pre-release to test this out! : thumbs up : : thumbs up : Regards, Shantanu

> > We are not ready for "prime-time" though. > Using the "lpxelinux.0" file from 6.03-pre19 ... > > My RHEL5 installs, when using the "http://" for kernel, initrd and append lines, seem to be hitting some sort of parameter length limit. > The culprit seems to be the long "append" line. > > The same append line, when NOT using

Hi, HPA: Thanks for the nice new features, appreciate that. Syslinux is always a nice program. For the new version, 3.10-pre20, I encountered a problem now, my client machine uses sis900 chip, and it still can not run simple menu with pxelinux in this version (3.10-pre20). It's same situation as I encountered when I used syslinux 3.07, 3.08 and 3.09. For 3.10-pre20, I compiled in Fedora

Hi, I am using syslinux-4.00-pre24, -pre27 and -pre31. chain.c32 fails for pre27 and pre31 for particular configs ... shown below. 1) works on pre24, fails with error message "Chainboot failed!" for pre27 and pre31 LABEL local MENU DEFAULT MENU LABEL Local Boot ... (skip PXE boot) KERNEL chain.c32 APPEND hd0 0 2) works on all three. LABEL local

On 7/28/2016 3:41 PM, Fawzy Ibrahim wrote: > LSI SATA MEGARAID 95Q9 afaik, the megaraid cards are mostly all SAS, which support SATA drives, except very old ones were SCSI. Ok, I do see they had a series of MegaRAID SATA 150-xx and 300-xx cards, these were 64 bit PCI or PCI-X cards. 95Q9 does not appear to be a valid card number, 9240, 9260, 9280 are some pci-express SAS MegaRaid

John R Pierce wrote: > On 7/26/2016 10:20 AM, Fawzy Ibrhim wrote: >> I want to install Centos 7 latest build on NEC Server 5800/120b-2. >> >> The installation wizard fails to detect the storage connected to LSI >> SATA MegaRaid PCI. > > which megaraid card? they've made quite a lot. lspci will list the > card type... > > linux will only see storage

Hi there, I have a question regarding PCI passthrough on the Citrix XenServer 5.6 (Xen 3.4.2). I already managed to get some soundcard passed through to a Windows guest. So I think my knowledge about that topic isn''t _that_ low. But I cannot seem to pass through a SATA/PATA controller to a Linux guest. I have some additional CD/DVD burner (PATA) attached to a SATA/PATA controller

I tried isolinux 3.10-pre20 on an Acer Aspire 1501LMi notebook and a Shuttle FS-40 desktop box; it fails on both, simply hanging after printing the first line. Last known good version is 3.10-pre16; will try pre17-pre19 when I have some time.

> -----Original Message----- > From: Matt Fleming [mailto:matt at console-pimps.org] > Sent: 09 July 2014 19:50 > Hey Andrew, > Sorry for the delay. Could you provide the packet dumps of the network > traffic involved in the failed EFI boot? > Hopefully that will allow us to track down exactly what's going wrong. Hi Matt, Appears to all be working under 6.03-pre19 on

How do I check if the proper sata drivers are being loaded? If they are not what can I do other then rebuilding the kernel? Thank you in advance, Randy _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Hi, I have been using 6.03-pre11 lpxelinux.0 to deliver standard (TFTP) and HTTP based vmlinuz and kernel images. Things are working fine. When I upgraded the same to 6.03-pre12 it stopped working. On the console of the machine that is booting, is stalls infinitely at the line: PXELINUX 6.03 lwIP 6.03-pre12 Copyright (C) 1994-2014 H. Peter Anvin et al Screen shot attached. FWIW: 1. the

Hi all, I too am getting positive results using 6.03-pre19 lpxelinux.0, for the problem that I have been facing. The symptom was that booting hangs on client side. On the server (DNSMasq TFTP) it keeps getting a request for the same (MAC address) file. OR, alternatively it just stops completely. My server: OptiPlex 755. BIOS A22 The PXE booting client: OptiPlex 960. BIOS A17 * Things are

Hi, I have a problem to report with the 4.10-pre15 branch. The problem is that my KVM guest "just reboots" when booting off the network. The setup is as follows: Host OS: RHEL 6.0/RHEL 6.1 with the default packages (no additional repos or packages) KVM guest configured to network boot. (maybe irrelevant info ...) ?!? DHCP server (using dnsmasq) in the same subnet as the KVM host.

Hey, Are there any known issues with the Intel''s integrated HD graphics 4000? I just bought a new laptop and have tried everything I can think of to get Xen to load. After choosing Xen in GRUB, it just boots to a black screen. There is no error message , no dmesg output, nothing. I have no idea what is causing this problem. I''ve gotten Xen to install with no problems on another