similar to: Latest 6.2 kernel is broken

I have a broadcom bcm5722 and a dual intel pro/1000 pt nic in a dell t110. The setup sees the cards and i put them into automatic mode. After the install no cards are detected at all. Astaro 8.01 detects and utilizes all of these cards just fine. I have also tried ubuntu server 10.04 lts and they work fine. I'm curious if this is a bug with Centos 6?

I make some networking performance tests for Linux 3.10.13 #1 SMP is that normal Linux (pktget) ----> Linux (router) ----> Linux (Sink) eth0: 0.00 P/s 652024.78 P/s 652024.78 P/s eth1: 652175.58 P/s 2.98 P/s 652178.55 P/s with echo 0 >/proc/sys/net/bridge/bridge-nf-call-iptables CPU is about 2% with echo 1

Hi, I hope someone can help me, I cannot seem to get a system's ethernet interface to correctly work in promiscuous mode... I have a Centos 6.4 system with 2 bnx2 interfaces on it. I have set up eth1 in promiscuous mode and am sending traffic to it using the port mirroring configuration on a Nortel 3510-24T switch. The switch reports that it is sending a fair amount of traffic to the

Hello list, I have two differents installation Xen Hypervisor on two identical physical server, on the same switch : The problem is on my new server (Xen 4.0.1 with pvops kernel 2.6.32.24), I have bad performance on bandwidth I have test with a files copy and "iperf". Result iperf average: Transfert Bandwidth XEN-A -> Windows

Package: xen-hypervisor-3.4-amd64 and linux-image-2.6.32-5-xen-amd64 Version: 3.4.3-1 and 2.6.32-15 Hello all, GRUB-PC does not automatically populate Xen related parameters in /boot/grub/grub.cfg so I added them manually (see below). All the packages involved on my Dell PowerEdge R710 running Debian GNU/Linux Squeeze AMD64 are from the Squeeze repository. There are four (4) 1TB SATA HDD

I have a new x3655 IBM and whenever the /etc/xen/scripts/network-bridge script starts, the ethernet would no longer work. This post isn''t about the cause, but the fix. I did a lot of tcpdumps and Googling, but I''ll spare you that. All they do is prove that yes, there is an issue. :) I tried Debian 4.0 i386/amd64 and Ubuntu 7.04 Server i386/amd64 and they all exhibit the

Hi all I'm trying to setup second ethernet on Dell 2950 server but there isn't any eth1 device (in the bios are ON) # dmesg |grep eth eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 169, node addr 001c23d878bb eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f4000000, IRQ 169, node addr 001c23d878bd

Hoping someone else has seen this before. I have a few dozen Dell R610 systems with CentOS 5.2 that are using kernels from 5.3 and 5.4 (2.6.18-128.1.10.el5 & 2.6.18-164.6.1.el5), that at random lose layer 2 network connectivity either partially or totally. Running tcpdump on the interface reveals only ARP broadcasts, no responses. Switch reports no packets being received on the interface.

Hi all, I have a problem when from domU I need to configure a network interface. My system configuration is the next: dom0: xen 3.4.3 with 2.6.18-238.9.1.el5xen kernel, making pci back from a network card. All ok. This is the result from "lspci -v -s 09:00.0" 09:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 12) Subsystem: Broadcom

Hi, I''ve run into the same issue as: http://lists.xensource.com/archives/html/xen-users/2006-07/msg00599.html In that, running the network bridge script kills networking completely, trying to ping the gateway gives me destination host unreachable. The card is: 09:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 11) Using the bnx2 module:

I am having an extremely strange issue with a BL460c1 (G1) blade on a c7000 enclosure. I could not for the life of me get the machine to ping the gateway or any other blade on the same enclosure (yes, the subnet mask was correct & quadruple-checked); although pinging to the local IP works. I was almost convinced that it was a network or hardware issue; until I asked someone to try

I am having the same problem. But, I cannot access to the following link for solution http://wiki.ncsa.uiuc.edu/wiki/Dell_PE1950_NIC_Firmware_Workaround Can someone send me the content of this link? Thanks. Pete, This may be relevant: http://wiki.ncsa.uiuc.edu/wiki/Dell_PE1950_NIC_Firmware_Workaround - Mike At 8/18/2006 09:40 AM Friday, Peter McEvoy wrote: Hi, I''ve run

Howdy folks, this email is a follow-on to a 3-month-old thread about kernel page faults from the bce driver[0]. 0: http://lists.freebsd.org/pipermail/freebsd-stable/2013-March/072713.html Sorry to revive such an old thread, but a couple of bits of new information has come to light here that may be useful for others. The header splitting suggestion that Marius Strobl made[1] did fix the kernel

Hello Mailing List I got a severe network error message at a HP DL360 Server. The kernel log says: ----------------------------------- /var/log/messages ----------------------------------------------------------------- Mar 19 15:45:06 server kernel: do_IRQ: 2.168 No irq handler for vector (irq -1) Mar 19 15:45:17 server kernel: bnx2 0000:02:00.1: eth1: DEBUG: intr_sem[0] PCI_CMD[00100446] Mar 19

Hi Well we are now using HP instead of Dell and have hit a major hurdle. We dont seem to be able to kix any of these boxes. I have been most recently trying on a dl585 and the issue appears to be that the kix kernel does not detect any nic. Its strange as the box can be installed using iso's and the nic appears as eth0: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64-bit 100MHz

Hi Michael: Sorry to brother. But I''ve been suffered this issue quite a long time. My test environment is 2.6.32.36 + xen 4.0.1 + bnx2, 2.3. Also cpu idle is disabled in grub. Grub info: title Red Hat Enterprise Linux Server (2.6.32.36xen) kernel /xen-4.0.1.gz iommu=off x2apic=off console=com1,vga com1=115200,8n1 noreboot cpuidle=0 cpufreq=none

Hi, The fact that apparently the last tigervnc update from upstream was missed triggered me to check for missing updates and packages in 6.3. Here are my results. Sorry for any false positives that might have crept in, but note that some of the 6_x updates actually are updates and not a parsing error. And perhaps an occasional false positive due to having to compare upstream SRPMS vs downstream

Hello all. We recently purchased HP Proliant DL380 G7 server and also a HP Lefthand P4500 G2 24TB iSCSI box. The server itself has Quad Ethernet based on the BCM5709 Chipset from Broadcom (NetXtreme II). My main question is about iSCSI offload mechanism, as iSCSI itself is pretty new to me but I have gotten a good hold on it tho. I have managed to setup and configured our Lefthand box into

I totally agree with Luc Boudreau about this problem. On modern branded server they ALL use Broadcom chipset... I must admit that: a) lot of people are experiencing the problem but can tolerate it or b) someone already experienced this problem and solved it Lets'' approach the problem pragmatically... just start with a survey on the list. ... hope we solve this issue soon. Ivan

Hi Folks: I have a strange problem with multiple (2) NICs on a CentOS 5.5 dom0 setup running xen 3.4.3 and have been struggling to fix it for some time. I could not find anything by googling or searching through this list but that is probably because I couldn''t figure out the correct search terms. After I configure my bridges the command "system network restart" fails for eth1