similar to: Re:RE:Cupsprinter over samba won't work from w2k clients

Hallo! I installed Samba 3.0.1 on Deb Woody 3.0 with Cups 1.1.19 and joined to an NT4 Domain without problems, after solving the "Umlaut" problem. Unfortunately the System was installed in german... I read a lot in the Samba HowtoCollection and installed the printer following to it step by step. Added the printer driver via APW, then connected from the Client and changed some

I tried at work to run "/usr/bin/smbspool" manually: --- $ /usr/bin/smbspool Xerox-WorkCentre-5325 \'5\' \'yugiohjcj\' \'2.pdf\' \'1\' DEBUG: Connected with username/password... --- The behavior at work is different from the one at home because it is not the same computer used and the /etc/samba/smb.conf is available. However, as you can see above, the

hi everybody, after some trouble i an know able to upload and set printerdrivers via cupsaddsmb and windows apw. but there are two errors. - i cant use the driver on a windows xp 32, if does not get installed as root previously. - i have a Oki Execution series 7411 and used the PS Driver. when printing to that printer i get in smb.log Unable to print file to es7411 -

In CentOS 6, I could do: lpinfo -m then pick the model I want and put it as the option to -m in lpadmin (line wrapped): /usr/sbin/lpadmin -p printer -o printer-is-shared=false -o Duplex=None -o Resolution=600dpi -m 'gutenprint.5.2://pcl-g_5e/expert Generic PCL 5e Printer - CUPS+Gutenprint v5.2.5' -v 'socket://mydomain.edu' Alas, in CentOS 7, no matter what I do, I always get:

Hello, I've tried both samba-3.0.0beta2 and beta3 but both give me the same problem. When on a windows dekstop and trying to add a printer with samba as the printserver , the printers exported by the samba server are not seen by the windows "add printer dialogue" e.g.: relevant part of smb.conf: ----------------------------------- load printers = yes printing = cups

We're using Cups and Samba with Adobe Postscript Drivers to print from XP SP2 machines via our Solaris and Linux Domain Controllers. Everything has been working OK, but when I setup an a new printer (identical ppd file to another one), it doesn't download the drivers on XP when I add the printer. This is happening on two domain controllers in different offices. It gives the error when

I am having problems with the driver installation for WIN40 (9x machines) in Samba 2.2.5 / Samba 2.2.6pre2 on a Solaris 8 machine. I build binary packages for both debian and solaris environments. For debian 2.2.5, I use the 2.2.5 source with the printing patch provided by Jerry Carter. I use the packaging/Debian/debian systems to build and package the source. For Solaris I use the

On 11/06/2019 01:56 PM, Fred Smith wrote: > On Wed, Nov 06, 2019 at 10:01:49AM -0600, Michael Hennebry wrote: >> On Wed, 6 Nov 2019, Michael Hennebry wrote: >> >>> On Sun, 3 Nov 2019, Jon LaBadie wrote: >>> >>>> Have you tried adding the Brother CUPS and/or generic LPR software? >>>> >>>>

Our server is a SuSE Linux 7.2 with CVS samba 2.2 branche. Version number is 2.2.pre-4. We updated today. We have a problem with the default devmode in Windows 2000 (SP2) clients. We have uploaded the printerdrivers to the share print$. The Samba printeradministrator is able to change the printer capabilities as memory, trays, papersize. etc. Changes are global: when a user logs in, he sees

Hi, printer driver download with W2000/Xp (samba-2.2.7 and cups-1.1.18) and the Adobe PS Driver works fine for our location. But when I try to download a driver with W9X the driver installation widzard starts. Samba logs the following messages... (Cant determine number of printer driver files...) (see second apandix) The installation of the driver works with no error. (see first apendix) Has

Greetings, Similar to the other CUPS thread, but not the same. Samba 2.2.5 built on a Sparc Solaris 9 box with Cups 1.1.5. I've set up Samba to print with Cups as outlined in the docs. I am able to download the generic Adobe print driver to my Windows 2000 clients but the Windows 98 clients are asking for a local driver to be installed. Looking at verbose output from cupsaddsmb,

Hello, been googling this for a while. Read GD's presentation on why printing is such a pain... Anyway, I'm using 3.4.8 on Freebsd 8.1 I've tried a few combinations - best luck is with 3.2.5, but I'd like to move forward a bit. So, I've got the ADS part working pretty good. happy with how that's going. my problem is when I attempt to load printer drivers.

Hi In order to add several phones to a single extension number, I have replaced entries like: exten => 100,1,Dial(SIP/sipphone100,20,Tr) into: exten => 100,1,Dial(Local/100 at phones,20,Tr) [phones] exten => XXX,1,Dial(SIP.sipphone${EXTEN}) etc This works great. However in the CDR, than seeing one entry for each call, I see several entries in the CDR Worse, if I do something like:

Hello, For education purpose, I would like to add G729 support to an Asterisk 1.4.19.1 system. I've read this : http://www.readytechnology.co.uk/open/ipp-codecs-g729-g723.1/ but when downloading Intel IPP software, it appears that latest IPP version is 5.3. As installation instructions here ( http://www.readytechnology.co.uk/open/ipp-codecs-g729-g723.1/doc-svn8.txt) relates to Intel IPP

Hello! Has anyone had any luck getting CUPS to talk to an Epson Workforce 600 printer? I got pipslite and eklite.ppd extracted (and modified it to use Letter instead of A4) but I can't seem to get CUPS to talk succesfully with the printer. The printer configuration under Gnome widget does show that CUPS detected something (pipslite:...) but when I try to use it I get a wrapper error.

Hi all, I have a Develop ineo 25e printer, and want to set it up with CUPS. I connect to http://localhost:631/ and add the printer, with uploading the PPD available here: http://www.develop.eu/en/products/office-products/colour/ineo-25/downloads.html (English, Linux, version 1.1 dated 2012) The printer is network connected, and the connection is socket://192.168.129.100 job-sheets=none, none

I set up a samba 3.0.2 server as member server in a NT4 Domain. Winbind works great and I can "use" the NT Domain users for all I need. At the moment I'm testing different shares with their permissions. The Samba will also be our printserver, so I set up also cups and added the printers to samba with cupsaddsmb - Great tool! . Users could connect and all worked fine. After a reboot

Hi friends I just started using wine on my Linux-machine. Mostly because I want to switch finally from Windows to Linux on my computer at work. There is just one single application I want to "take with me" and that is "GraphPad Prism" (http://www.graphpad.com/prism/Prism.htm). So I installed wine0.9.20 on my Mandriva2007. Then I used wine to install Prism in its most recent

Hi guys, Thanks very much for your answers! > ...but there's only so much documentation that can cover all the workarounds. > At some point, you need a Windows developer to fix the issues, and to propose > ways to handle things in the source tree that can work for both Windows and > POSIX systems. > > There were some serious problems with the original Windows port branch

Hi I recently tried to install the printerdriver to the samba server (samba 3.0alpha30 on debian) from a windows 2000 client. The APW asked me for a Win2k-server cd for the winnt drivers, although i had them on a disc...which I don't have 2 Questions: 1) does anybody know why the APW will not accept my winnt driver from the driver disc when i comes to install the winnt driver 2) is it