similar to: Support for boot WinCE from disk

Hi! I need to install vmplayer on Xen guest with centos4.4. When I run vmplayer-config.pl I have problems with inserting vmmon module in kernel. The dmesg shows this message vmmon: Unknown symbol xen_features I read on the forums that vmware is not running on Xen. What I am wondering is if this affirmation refers also to vmplayer and if not how can I skip this problem? Thanks in advance!

I had the chance to test out one of the new Sun X2200 M2 servers for a week or so, aiming to check out the status of HVM support on these machines. The machine was a dual-Opteron dual-core, with 8GB RAM and 1 300GB SATA disk. Normally I tend to use Debian on my servers, but due to lack of needed hardware support on Debian x86_64 images, and because I had very few time to run the tests, I used an

Hi, Keir, Currently, HVM guests do not have access to performance counters. So it is not possible to use performance analyzer software such as vtune in HVM guest to analyze programme performance. Other usage of performance counters , for example, the NMI watchdog, won''t function either. This patch will enable performance counters in HVM guest. Currently, only Core 2 Duo is implemented.

Hello, I have some interesting issue with Intel VT CPU and XEN 3.0.2: I''m running XEN 3.0.2 on a MSI Fuzzy 945GM2 Mainboard (http://www.msi.com.tw/program/products/ic/ic_detail.php?prod_no=4) with a Intel Core 2 Duo Mobile CPU (T5500). When booting the mainboard BIOS says it found a EM64T CPU, which is AFAIK the code for a Intel CPU with Virtualisation Technologie. But whether Linux

I''m pleased to announce the availability of Xen 3.1.1 -- a bugfix release in the Xen 3.1 series. Many bugs, large and small, are fixed by this release and we recommend that all users and vendors upgrade. The source repository is available using mercurial from: http://xenbits.xensource.com/xen-3.1-testing.hg Binary packages have not yet been prepared for this release. Thanks to

I''m pleased to announce the availability of Xen 3.1.1 -- a bugfix release in the Xen 3.1 series. Many bugs, large and small, are fixed by this release and we recommend that all users and vendors upgrade. The source repository is available using mercurial from: http://xenbits.xensource.com/xen-3.1-testing.hg Binary packages have not yet been prepared for this release. Thanks to

Hello, I'm also interested on libvirt and was going to produce the patch for libxen when I noticed this bug. Bastian, I'd like to know if you could do it now since 3.1 has release the 1.0 version of API and then it looks now these changes has calm down a bit. Can you merge Anibal's patch? -- O T A V I O S A L V A D O R ---------------------------------------------

Hello! I work for O.S. Systems with Otavio Salvador. We are trying to build a module for syslinux to boot a Windows CE 6.0 image. The basic stuff is: we need to load a Windows CE image and jump to its entry point. The Windows CE image file (nk.bin) has its entry point is stored on a variable location. The first 15 bytes of the file are the image header. The following bytes are a contiguous list

Hello Friends, I am trying to use speex-1.2beta3 version for echo cancelling. On my WinCE board I am using WaveIn/WaveOut functions to record and playback audio. I am receiving audio data on udp socket, then playing it on speaker using WaveOutWrite function. I registered callback to capture microphone data, then data chunk came from socket ( which I played on speaker) and data captured from

Hi, Found a nice little video about a prototype phone from broadcom currently sitting in Microsoft WinCE lab. The video is at: http://channel9.msdn.com The video in question is an interview with Mike Hall titled "Windows CE and Windows Embedded Lab Tour". The clip dealing with the VOIP phone is right at the start so you don't need to watch the whole thing (although there is some

Hi there, I've found no answers to this question from Fri Apr 15 19:33:50 2005. Are there any answers now? > I'm sure this is a common question, but I haven't seen it asked nor answered > on this list, on the Theora Wiki nor FAQ, nor on the Internet at large > (though I haven't checked the whole thing): > > Has anyone ported 'libtheora' to WinCE or

Hi, I'm having an issue trying to make a Windows machine sambaserveroin a Samba domain. Samba is running with LDAP backend (OpenLDAP). When I try to join the domain, Windows says that the machine account does not exist. The machine account, however, is successfully created in the LDAP directory after the join fails. When I try to join again, Windows says that the account already exists.

Basic x86 support [1] for running Linux as secondary Jailhouse [2] guest is currently pending in the tip tree. This builds on top and enhances the PCI support for x86 and also ARM guests (ARM[64] does not require platform patches and works already). Key elements of this series are: - detection of Jailhouse via device tree hypervisor node - function-level PCI scan if Jailhouse is detected -

Basic x86 support [1] for running Linux as secondary Jailhouse [2] guest is currently pending in the tip tree. This builds on top and enhances the PCI support for x86 and also ARM guests (ARM[64] does not require platform patches and works already). Key elements of this series are: - detection of Jailhouse via device tree hypervisor node - function-level PCI scan if Jailhouse is detected -

Hello everyone. I've recently replaced a file server running Samba 2.2.8a on Solaris 8 with one running 3.0.23c-2.el5.2 on CentOS 5. I'm trying to set up a WinCE 4.1 device (A V56 Makino milling center with a Pro 5 controller) to work with the new configuration and I can't get it figured out. When I try to do a 'net use share1 \\server\share', it responds with 'Command

Basic x86 support [1] for running Linux as secondary Jailhouse [2] guest is currently pending in the tip tree. This builds on top and enhances the PCI support for x86 and also ARM guests (ARM[64] does not require platform patches and works already). Key elements of this series are: - detection of Jailhouse via device tree hypervisor node - function-level PCI scan if Jailhouse is detected -

Basic x86 support [1] for running Linux as secondary Jailhouse [2] guest is currently pending in the tip tree. This builds on top and enhances the PCI support for x86 and also ARM guests (ARM[64] does not require platform patches and works already). Key elements of this series are: - detection of Jailhouse via device tree hypervisor node - function-level PCI scan if Jailhouse is detected -

Basic x86 support [1] for running Linux as secondary Jailhouse [2] guest is currently pending in the tip tree. This builds on top and enhances the PCI support for x86 and also ARM guests (ARM[64] does not require platform patches and works already). Key elements of this series are: - detection of Jailhouse via device tree hypervisor node - function-level PCI scan if Jailhouse is detected -

I'm sure this is a common question, but I haven't seen it asked nor answered on this list, on the Theora Wiki nor FAQ, nor on the Internet at large (though I haven't checked the whole thing): Has anyone ported 'libtheora' to WinCE or PocketPC 2003? I seem to recall seeing a Linux ARM port, but I haven't been able to confirm that, either. I see there's a

Hi list, I would like to know about any proposed XML representation for tc objects hierarchy. I found something at "LTCM, a Linux QoS API Library" (http://artemis.av.it.pt/~ltcmmm/) that looks like a start, but any others are welcome. I''m starting a project to automatically syncronize traffic shape rules between servers and thought XML is the best way to represent tc