Displaying 20 results from an estimated 6000 matches similar to: "xen-utils-4.1, pygrub, xvda1, "Boot loader didn't return any data!""
2008 Nov 27
6
Bug#507020: xen-utils-3.2-1: Pygrub says "Error: Boot loader didn't return any data!"
Package: xen-utils-3.2-1
Version: 3.2.1-2
Severity: normal
When my domU uses this configuration:
---
root = '/dev/sda2 ro'
disk = [
'phy:/dev/volume0/lenny.vandervlis.nl-swap,sda1,w',
'phy:/dev/volume0/lenny.vandervlis.nl-disk,sda2,w',
]
---
Pygrub gives the error "Error: Boot loader didn't return
2013 Jan 04
1
Bug#697409: xen-utils-4.1: pygrub does not correctly distinguish between "disk with partitions" and "partition"
Package: xen-utils-4.1
Version: 4.1.3-7
Severity: normal
The function is_disk_image in /usr/lib/xen-4.1/bin/pygrub at line 45
distinguishes a partitioned disk from a partition by looking for 0xaa55
at offset 0x1fe in the image, but this is the bootsector signature, not
the partition table signature. extlinux and other bootloaders put this
signature there on bootable partitions (which don't
2015 Aug 21
0
Bug#507020: xen-utils-3.2-1: Pygrub says "Error: Boot loader didn't return any data!"
Control: tags -1 +moreinfo
Sorry this bug seems to have fallen through the cracks.
On Thu, 27 Nov 2008 09:34:19 +0100 Paul van der Vlis <paul at vandervlis.nl> wrote:
> You may find bringing this up on xen-devel useful.
Did you bring this up on the upstream list? Does this bug still occur
for you?
Thanks,
Ian.
2012 Jun 28
10
Error: Boot loader didn't return any data [pygrub boot debian wheezy alpha1 netinst ISO]
Note: I could simply direct boot the appropriate kernel/initrd to get
the alpha1 installation going as always done in the past, but I think
this should work. The Debian alpha 1 installer page says it should.
Details
$ sudo xm create -c wheezytest.cfg
Using config file "./wheezytest.cfg".
Error: Boot loader didn''t return any data!
direct pygrub test run:
# pygrub
2011 Oct 29
0
Bug#644100: Boot loader didn't return any data! if reboot domU with disk DRBD
Package: xen-utils-4.0
Version: 4.0.1-2
If you reboot with the DomU disk DRBD domain destroy.
pygrub error when trying to run a image on DRBD device
My config DomU
------------------------------------------------------
bootloader = '/usr/lib/xen-default/bin/pygrub'
vcpus = '1'
memory = '256'
cpus="8-15"
root = '/dev/xvda2 ro'
#disk
2014 Nov 20
0
Bug#745419: Bug#745419: xen-utils-4.1: Pygrub fails to boot from LVM LV when something installed in the volume boot record
Tags: patch
I think this can be fixed with the following patch; it at least worked for
me:
http://lists.xen.org/archives/html/xen-devel/2011-01/txtLboGgCEUdF.txt
-- Adi
--- xen-4.1.0/tools/pygrub/src/pygrub.orig 2010-12-31 15:24:11.000000000 +0000
+++ xen-4.1.0/tools/pygrub/src/pygrub 2011-01-30 18:58:17.000000000 +0000
@@ -96,6 +96,7 @@
fd = os.open(file, os.O_RDONLY)
buf =
2011 Nov 20
2
Bug#649349: xen-hypervisor-4.1-amd64: pygrub fails due to invalid opcode trapped
Package: xen-hypervisor-4.1-amd64
Version: 4.1.1-3
Severity: important
Whenever I try to start a domU, xm create failed for
'Boot loader didn't return any data!'.
% sudo xm create -c squeeze.cfg
Using config file "/etc/xen/squeeze.cfg".
Error: Boot loader didn't return any data!
It seems related to the following error in dmesg
[1440.163935] pygrub[3654] trap invalid
2013 Feb 25
0
Bug#701672: xen-utils-4.1: add xfs support to pygrub
Package: xen-utils-4.1
Version: 4.1.4-2
Severity: wishlist
Tags: patch
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Dear Maintainer,
Please consider adding xfs support to pygrub in xen-utils-4.1. The
version from xen-utils-4.2 from upstream supports xfs and the required
changes are minimal. I am attaching a patch which was constructed by
squashing the following commits together:
2011 Oct 02
0
Bug#644100: pygrub error if the root disk value is not the first in the list.
Package: xen-utils-4.0
Version: 4.0.1-2
Severity: normal
File: pygrub
pygrub error when trying to run a image created by xen-create-image
with partitions option.
----------------------------------------------------------------------------------------------------------------------------------------
[2011-10-02 21:36:08 1512] DEBUG (XendDomainInfo:101)
XendDomainInfo.create(['vm',
2013 Jan 04
1
Bug#697407: xen-utils-4.1: pygrub doesn't find extlinux.conf in default Debian location
Package: xen-utils-4.1
Version: 4.1.3-7
Severity: normal
pygrub looks for extlinux config files "/boot/isolinux/isolinux.cfg" and
"/boot/extlinux.conf", but the default Debian installation uses the
config file "/boot/extlinux/extlinux.conf". (See
/usr/lib/xen-4.1/bin/pygrub lines 405-407.)
...Marvin
-- System Information:
Debian Release: 7.0
APT prefers testing
2013 Jan 04
2
Bug#697417: xen-utils-4.1: pygrub is unable to parse default Debian grub.cfg
Package: xen-utils-4.1
Version: 4.1.3-7
Severity: normal
The grub.cfg created by a default Debian installation uses many
configuration statements that pygrub does not recognize, and pygrub is
unable to find any kernel to load.
...Marvin
-- System Information:
Debian Release: 7.0
APT prefers testing
APT policy: (990, 'testing'), (500, 'stable-updates'), (500,
2013 Jan 04
2
Bug#697412: xen-utils-4.1: pygrub does not recognize the include statement in extlinux.conf
Package: xen-utils-4.1
Version: 4.1.3-7
Severity: normal
pygrub does not recognize the include statement in extlinux.conf. The
default Debian installation of extlinux creates a stub extlinux.conf
which includes linux.cfg, where all the linux image entries are. This
means that even if bugs 697407 and 697409 are fixed, pygrub still can't
find the right kernel on a default Debian installation
2014 Apr 22
0
Bug#745419: Bug#745419: xen-utils-4.1: Pygrub fails to boot from LVM LV when something installed in the volume boot record
On Mon, 2014-04-21 at 15:43 +0200, Sjors Gielen wrote:
> Package: xen-utils-4.1
> Version: 4.1.4-3+deb7u1
> Severity: important
>
> When an LVM LV that serves as the root disk for a Xen DomU contains a boot
> loader (or possibly other data) in its volume boot record, pygrub fails to boot
> it, printing "Error: boot loader didn't return any data" before exiting.
2010 Sep 27
8
pygrub question
Hi,
I''ve prepared a Ubuntu 10.04 LTS server on a Xen 3.2-1 host running
Debian Lenny on kernel 2.6.26-2-xen-amd64. The Ubuntu 10.04 domU is
running a 2.6.32-24-server kernel from the Ubuntu repositories, which is
(must be :-) ) xen-aware. The domU uses pygrub to boot and it works like
a charm.
Now I''m trying to deploy this domU on a Xen 3.2-1 host running Debian
Etch on kernel
2008 Sep 29
0
Bug#500557: xen-utils-3.0.3-1: pygrub boot not working
Package: xen-utils-3.0.3-1
Version: 3.0.3-0-4
Severity: normal
Booting with pygrub doesn't work. First problem is the path to
libraries (/usr/lib/python is used instead of
/usr/lib/xen-3.0.3-1/lib/python):
$ /usr/lib/xen-3.0.3-1/bin/pygrub
Traceback (most recent call last):
File "/usr/lib/xen-3.0.3-1/bin/pygrub", line 25, in ?
import grub.GrubConf
ImportError: No module
2012 Jul 06
1
Bug#680479: xen-utils-4.0: pygrub does not support grub2 submenus
Package: xen-utils-4.0
Version: 4.0.1-5.2
Severity: important
Tags: upstream patch
pygrub in Debian Squueze does not support Grub2 submenus. At least
Ubuntu Precise uses a submenu for older kernel versions, so a Precise
domU with more than one kernel installed will be unbootable (without
manual fixes) on a Squeeze dom0.
Attached is a patch that adds submenu support to pygrub.
-- System
2010 Oct 06
1
Bug#599243: xen-utils-4.0: pygrub does not understand grub2 partition types (e.g. (hd0, msdos1) instead of (hd0, 1))
Package: xen-utils-4.0
Version: 4.0.1-1
Severity: normal
Tags: patch
pygrub could not boot a newly-updated Debian/testing domU with a non-chained grub2. The traceback was:
Using <class 'grub.GrubConf.Grub2ConfigFile'> to parse /grub/grub.cfg
WARNING:root:Unknown directive load_video
WARNING:root:Unknown directive terminal_output
Traceback (most recent call last):
File
2011 Oct 01
2
Bug#643953: xen-utils-4.0: pygrub can not parse empty "root" statement in menu.lst
Package: xen-utils-4.0
Version: 4.0.1-2
Severity: normal
Trying to get a system that I've long had runing on the bare metal to
boot as a VM, I discovered that pygrub would not parse my menu.lst. The
problematic entry is this:
# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root
pygrub's parser seems to
2013 Mar 02
4
Bug#702046: xen-utils-4.0: PyGrub VM Boot fails after xen-utils 4.0.1-5.6 -> 4.0.1-5.7 Update
Package: xen-utils-4.0
Version: 4.0.1-5.7
Severity: important
After Upgrading to xen-utils 4.0.1-5.7 my pygrub Xen VMs won't boot. Running pygrub manually shows:
/usr/lib/xen-default/bin/pygrub --args=root="/dev/xvda ro" --output=/tmp/foo /dev/vg0/vm-disk
Using <class 'grub.GrubConf.Grub2ConfigFile'> to parse /boot/grub/grub.cfg
WARNING:root:Unknown directive
2008 May 13
1
Bug#481105: xen-utils-3.2-1: Need to ajust path to pygrub and hvmloader
Package: xen-utils-3.2-1
Version: 3.2.0-5
Severity: important
virtinst Debian package is pointing the pygrub path to /usr/bin/ and hvmloader to /usr/lib/xen/boot/. I suggest ajust the path
creating a symbolic link of /usr/lib/xen-3.2-1/bin/pygrub to /usr/bin/pygrub and /usr/lib/xen-3.2-1/boot/hvmloader to
/usr/lib/xen/boot/hvmloader. In the last case, need ajust the directory