similar to: Socomec sicon Netys 2000 PR ups USb driver for ubuntu

I've acquired and installed NUT 2.4.1 on a D-Link DNS323 NAS. With exception of Load and Battery Temp readings all works well. A upsc ups at localhost command returns; battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 50 battery.date: 2001/09/25 battery.mfr.date: 2008/06/05 battery.runtime: 2122 battery.runtime.low: 120 battery.temperature: 3022999999999998800 battery.type:

I have a new-ish APC Back-UPS XS 1500G connected via USB. It's giving me a "ups.alarm: No battery installed!" error. I also installed and configured apcupsd to give that a try and it's giving me the same error. I suspect this is a driver problem because while NUT claims the battery isn't plugged in, it's giving me battery runtime/charge info. Both can't be valid

Hi On 10/03/2014 03:42 PM, Charles Lepple wrote:> On Oct 3, 2014, at 7:50 AM, paul.chavent at fnac.net wrote: > > > This is what I was referring to (from the belkin-hid log): > >???? 1.325782??? Report[buf]: (5 bytes) => 05 53 00 48 00 >???? 1.325799??? Path: UPS.PowerSummary.ConfigVoltage, Type: Feature, ReportID: 0x05, Offset: 16, Size: 16, Value: 0 >????

I?m a new user of NUT and the OpenUPS - in the past I?ve used APC hardware and apcupsd on Centos 6. I?ve built NUT 2.7.2 from source but used the OpenUPS HID driver v0.4 that?s in github. I?m using firmware version 1.5 on the openups which is the latest published version; I?ve also tried 1.7 which Mini-box sent to me but reverted to the published version. Their support seems a bit slow! I?ve got

I am looking at the newhid driver for this Pulsar EXtreme here but it gives odd results, for example there is no status variable :) eg debug level is '2' Checking device (0463/FFFF) (/dev/usb0//dev/ugen0) - VendorID: 0463 - ProductID: ffff - Manufacturer: unknown - Product: unknown - Serial Number: unknown - Bus: /dev/usb0 Trying to match device Device matches HID descriptor retrieved

I purchased a TrippLite ECO550UPS from Amazon a few days ago thinking I was going to use it for my Windows Media Center HTPC. I've since changed my mind and decided to use Mythbuntu but it I can't get my UPS working with nut. I've tried all of the tripplite drivers and the usbhid-ups driver. The tripplite_usb and usbhid_ups output is listed below. The tripplite and tripplitesu drivers

Hello. Not listed as supported, so here is some info, [root at vhost ~]# /usr/sbin/usbhid-ups -DD -a powercom Network UPS Tools - Generic HID driver 0.38 (2.7.2) USB communication driver 0.32 0.000000 debug level is '2' 0.001318 upsdrv_initups... 0.074753 Checking device (0529/0001) (003/002) 0.074835 Failed to open device, skipping. (Permission denied)

On 28 May 2014, at 21:59, Charles Lepple <clepple at gmail.com> wrote: >> What would log it? > > The driver. OK. >> I could try running the driver with debugging and see if that shows anything of interest. > > That should help. Unfortunately for non-debug operation, it appears that most of the usbhid-ups instcmd messages are buried at debug level 3 or 5. That

Windows 7 Pro x64, NUT 2.6.5-4 (interim release) Product: Back-UPS RS 1200 FW:8.g3 .D USB FW:g3 Setting UPS values can be confusing. For example, battery.charge.low and battery.runtime.low. Using upsrw, the values will be retained after restarting the OS, but not if the UPS is turned off/restarted. In the driver log (below), it looks like the values are obtained from the UPS, but if I set

On May 11, 2017, at 1:51 PM, Jesse Molina <jmolina at swoncology.net> wrote: > > I suspect this is a driver problem because while NUT claims the battery isn't plugged in, it's giving me battery runtime/charge info. Both can't be valid at the same time. > > I am at a remote location from the computer and UPS, so I can't physically go over and check. I asked a

Good Evening, I recently purchased an EPYC quantum UPS. I installed NUT on the home assistant by connecting the UPS via USB and tried all the various drivers in the list, the only one that seems to work is: usbhid-ups with this log: s6-rc: info: service s6rc-oneshot-runner: starting s6-rc: info: service s6rc-oneshot-runner successfully started s6-rc: info: service base-addon-banner: starting

Hi, I am trying to talk to an MGE Pulsar Extreme UPS over RS232 with the mge-shut driver but I'm having some problems. It appears to init OK but I can't, say, turn the outlets off, eg.. harrow:~>upsc mge@localhost battery.charge: 78 battery.charge.low: 20 battery.runtime: 05760 driver.name: mge-shut driver.parameter.port: /dev/cuad1 driver.version: 2.0.3 driver.version.internal: 0.65

Hi On 10/06/2014 03:04 PM, Charles Lepple wrote:> I think I see what is going on. > >???? 0.368670??? Report[buf]: (5 bytes) => 05 4e 00 48 00 >???? 0.368698??? PhyMax = 0, PhyMin = 0, LogMax = 1, LogMin = 0 >???? 0.368723??? Unit = 00000000, UnitExp = 0 >???? 0.368747??? Exponent = 0 >???? 0.368776??? Path: UPS.PowerSummary.Voltage, Type: Feature, ReportID: 0x05, Offset:

Thanks Kjell for the help with the build problem. Thanks for your input, too, Charles. Now I have a new problem that I think has already been solved. I have Tripp Lite Smart1000LCD UPS (usb), but I can't get the newhidups driver to communicate correctly. I found a thread on the development list from last December where Jonathan Freedman described had a problem with this UPS in a thread

[please keep the list CC'd. thanks!] On Mar 13, 2015, at 10:53 AM, Philip Taylor <philip at kelsotowers.co.uk> wrote: > I?ve set up UPSMON to simply execute ?shutdown -h now? and my system shuts down when I type ?upsmon -c fsd?. The problem is that the OpenUPS doesn?t shut down as a result; and therefore when the power comes back on, unless the battery has totally run out, the

I'm testing a Powercom UPS (branded as Control System 2 STD80S: http://www.cs2.it/home.php?goto=prodotti&cat=0&idp=2&subid=0) with NUT. It is a USB HID device, with ID 0d9f:0004. I configured nut-server to use driver usbhid-ups and it works almost correctly: upsd communicates right with the device, upsmon catches its events... But when I try to perform a Forced Shutdown, UPS pauses

On Jan 2, 2008 3:34 PM, Arjen de Korte <adkorte-guest at alioth.debian.org> wrote: > Author: adkorte-guest > Date: Wed Jan 2 20:34:26 2008 > New Revision: 1210 > > Log: > Parsing continues if the HID path for a report ends in 0x00000000 (these will not be made available). Commonly used as placeholders. > > It looks like (but correct me if I'm wrong) that reports

Oops... changing that to --with-user=nut solved one problem. I have the driver, upsd and upsmon running now. Thank you! Now I'm back to another issue, every 2 seconds I get in the logs: May 3 13:45:23 myhost upsd[2587]: Connected to UPS [eaton]: usbhid-ups-eaton It seems happy to do this forever. On Tue, May 3, 2016 at 8:17 AM, Charles Lepple <clepple at gmail.com> wrote: > On

Hi, I've been checking out NUT with an OpenUPS board over the last couple of weekends, and have noticed that it doesn't seem to report sensible values. This lead me to investigate usbhid-ups and delve into various issues. As mentioned in a github issue, one of the problems is with the report descriptor - dumping this from the usbhid-ups debug output and picking through it reveals that

On Jan 8, 2015, at 11:43 PM, Graham Menhennitt <graham at menhennitt.com.au> wrote: > Hello Nutters, > > I'm running nut 2.7.2 on FreeBSD 10-stable (via the FreeBSD port) with an APC Back-UPS CS 350 connected via USB. I get persistent (every few minutes) messages logged "battery is low" but I don't understand why. I don't think it's for the reason