similar to: Codec

Anyone have an H.323 trunk tied between their Avaya and Asterisk box that works? I am having some issues trying to get the two systems to connect. I am using the ooh323 channel to try to make the connection between the two system. I have all my configs if anyone would like to look over them. If I do a trace on Avaya I get a denial event 1191: Network Failure. Thanks! -------------- next part

On Wed, Jun 16, 2010 at 4:35 PM, Shina Owolabi <shinacalypse at gmail.com>wrote: > Hi! > I've installed Asterisk 1.4.32 with freepbx-2.6.0 in an attempt to provide > a conference bridge for an existing Avaya PBX. I have no control over the > Avaya system, but I am able to speak with the admin in charge when I need > stuff done. I am running all this in a VirtualBox

Hi Gurus, We have configured asterisk to trunk with avaya with ooh323 channel driver. The sip phone registered on asterisk can dial the extensions registered on avaya via this trunk , and vice versa works too. Even we can make the avaya branch to dial asterisk?s extension and then this extension dial back to another avaya?s extension. But if we dial the external DID number via this trunk from

Dear all I have Asterisk which is connected with avaya through E1 back 2 back now i have on asterisk side G.711 codec and Avaya also useing G.711 codec everything fine. I need G.729 on my asterisk side. can i have lots of SIP phone on my lan and issue is i have 2 to 3 building so problem is LAN is congested thats why i need G.729 Now testing perpose i have download

Hi everybody, As the Asterisk community is getting larger and larger, I was wondering that the features which are provided in Asterisk and are programmed by the open source community under GPL, or GUIs like FreePBX which also come loaded with wonderful features and uses same Asterisk, are they anywhere violating any patent laws? Most of the features work the same way as Nortel, Avaya and other

I have a SIP trunk from my Asterisk server to an Avaya CM server. If I place calls inbound, everything works fine. If I place calls outbound, originating from the Asterisk box, everything works fine (I have done this with the use of the .call files). If I setup an extension with the findme-followme feature and have it try to hair-pin a call back out the same trunk to the Avaya, I get a

I am configuring a test Asterisk server (1.8.9.2) to practice setting a single codec globally, to avoid transcoding as much as possible. Since all of my recordings are in gsm format, I am trying to make the SIP clients use gsm everywhere. I am using Ekiga on Fedora 16 x86_64 for my tests. [root at elx2 asterisk]# cat /etc/asterisk/sip_general_additional.conf

Hello... I'm having problems with H323/G729 setup. Below is the output of h.323 debug when making a call. I use a SIP phone connected to an * box in the same LAN. The * connects to a h323/g729 PSTN terminator through internet. Calls rings and are answered in the other side, but I get no sound at all nor the other side does (complete silence in both sides). I thought this would just happen

I am experiencing a problem that from list archive it appears others are running into. When I dial from Cisco 7960 via the * to Free World Dialup destinations that supports G.729 the call fails. The major error from the debug log is Jan 15 00:11:14 NOTICE[22545]: channel.c:1481 ast_set_read_format: Unable to find a path from G729A to ULAW Jan 15 00:11:14 NOTICE[22545]: channel.c:1451

Hello, I'm trying to use the GSM codec with Nufone H323 but it's not working. Does somebody has some idea? Have I missed something? Thanks!! Celso Fassoni Some additional info: (I'm using CVS-HEAD - downloaded today) monkey:~# cat /etc/asterisk/h323.conf [general] port = 1720 bindaddr = 192.168.0.100 ; this SHALL contain a single, valid IP address for this machine

Hi, I have a communication partner who needs G.729. When I disable in oh323.conf all codecs except G.729A, everthing is fine, except that I can't receive calls with other codecs from other partners via H.323. That's why I enabled also GSM and G.711 in oh323.conf and put a SetVar(OH323_OUTCODEC=g729) in my extensions.conf for that partner. Now I see in the console log: -- Executing

I am interested in IMAP Voicemail storage for some of my customers. Does anyone know of any vendors of asterisk appliances (physical PBXs) that provide this as a "standard feature" (or an optional standard feature)? Ultimately, I'd like to be able to have a single point of accountability for the system as a whole. I would like an intuitive & powerful configuration GUI (such as

I'd like to start configuring my Avaya 9608G phones for use on Asterisk / FreePBX / PBX-In-a-Flash. I'm using a variety of other phones on my system without major issues. I've read the discussion back in March, May and August of 2016, but unfortunately, my difficulty is much more basic. I think it has to do with DHCP, specifically, what options I'm offering the phone via DHCP.

Right-- I've seen the Avaya document you cite below. It says "To administer DHCP option 242, make a copy of an existing option 176" but I don't have any example of option 176 or 242 to copy, and don't know what to do to /etc/dhcpd.conf to make it offer option 242. Then there's this long table of parameters to use with (presumably) option 242. I was hoping someone had a

Hi I seem to have installed the G729 codec properly but can't seem to get it to work .. in the Asterisk startup I see .. [codec_g729b.so] => (Annex B (floating point) G.729/PCM16 Codec Translator) == Detected 1 licensed G.729 transcoders WARNING[1074408160]: File translate.c, Line 218 (calc_cost): Translator 'g729tolinb' does not produce sample frames. == Registered translator

Hello, I'm trying to create a H.323 trunk between Asterisk 11 and Avaya. I have done this before between Asterisk 1.6 and Avaya but had some issues placing external calls from the Asterisk to the Public network which is connected to Avaya. I'm trying to create that trunk on Asterisk 11 because the 1.6 is outdated and has no support. On the Asterisk side I have Aastra 6731i SIP phones

Specs: Asterisk 1.4.22 running behind a SonicWall (transparent mode) with a public IP address. We have our phone system setup as 172.16.2.x that connect through the SonicWall to Asterisk. Incoming calls work flawlessly and we no longer get one-way audio. We are only using SIP (3 trunks now, instead of 2) and having all 3 in use is not an issue. Problem: Make a call on a Polycom 320 IP phone to

Hi all, i'm trouble with codec setup on an asterisk machine 1.4.18 and some Thomson ST2030 as extensions. In the users.conf file for internal extension i have: disallow=all allow=g729 allow=alaw allow=ulaw Without any codec installed (i mean with original g729 of asterisk) all go fine, calling from an extension to one other: Peer User/ANR Call ID Seq (Tx/Rx) Format

Hi All, I have Asterisk 11 talking to Avaya over SIP trunk using TLS and SRTP. On incoming calls from Avaya asterisk complains of 'unsupported crypto parameters: UNENCRYPTED_SRTCP' and rejects the call with '488 Not acceptable here' Doesn't Asterisk support UNENCRYPTED_SRTCP as crypto parameters in sdp? FYI SDP looks like this. v=0 o=- 1429194215 1 IN IP4 XX.XX.XX.XX s=-

Hello. I have a codec problem to send calls from a SIP device to a H323 gateway. First I'll explain the scenario: - Asterisk 1.2.1 - The SIP phone can use any codec I want. - The H323 gateway can only use g729 (cause it's not under my administration) - SIP phone has g729 configured, so my asterisk doesn't need to "transcode" (I don't have licences for g729) - sip.conf